FRANKE 112.0702.682 Lina Clear Water Filter Cartridge User Manual
- June 16, 2024
- Franke
Table of Contents
FRANKE 112.0702.682 Lina Clear Water Filter Cartridge
Product Information
Specifications:
- Product : Clear Water Filter Cartridge
- Model : [Article No. 112.0702.682]
- Manufacturer : Franke Home Solutions
- Country of Origin : Mexico
Product Usage Instructions
-
Safety Precautions:
To ensure safe usage of the Clear Water Filter Cartridge, please follow these safety precautions:- Keep small parts away from children under 3 years of age during installation.
- Do not use the filter cartridge with water that is microbiologically unsafe or of unknown quality without proper disinfection.
- If using the filter cartridge on disinfected water that may contain filterable cysts, ensure the system is certified for cyst reduction (EPA Establishment #91736MEX001).
- Protect the cartridge from freezing and remove it when temperatures drop below 1°C to prevent property damage due to water leakage.
-
Filter Cartridge Replacement:
To maintain optimal performance, replace the filter cartridge as per the following instructions: -
Ensure you have a replacement filter cartridge suitable for your Clear Water Filter system model.
-
Locate the filter cartridge housing, usually indicated by a symbol or label (Fig. 1).
-
Turn off the water supply to the filter system.
-
Release any pressure in the system by opening a faucet connected to the filter.
-
Follow the specific instructions provided by the manufacturer for your model to remove the old filter cartridge.
-
Dispose of the used filter cartridge properly.
-
Take the new filter cartridge out of its packaging and remove any protective covers or seals.
-
Insert the new filter cartridge into the housing, aligning it correctly.
-
Securely close the filter cartridge housing, ensuring it is tightly sealed.
-
Turn on the water supply and check for any leaks.
-
Flush the system by running water through the filter for a few minutes.
Note :
The disposable filter cartridge must be replaced every 12 months or sooner if
there is a noticeable reduction in flow rate.
Frequently Asked Questions (FAQ):
-
Q: How often should I replace the Clear Water Filter Cartridge?
A: The filter cartridge should be replaced every 12 months or sooner if you experience a noticeable reduction in flow rate. -
Q: Can I use the filter cartridge with water that is not microbiologically safe?
A: No, it is recommended to use the filter cartridge with water that is microbiologically safe or properly disinfected before and after filtration. -
Q: What should I do if I encounter water leakage?
A: If you experience water leakage, ensure that you have followed the replacement instructions correctly, including securely closing the filter cartridge housing. If the issue persists, contact the manufacturer for further assistance.
Clear Water Filter Replacement
CLEAR WATER FILTER CARTRIDGE REPLACEMENT WARNING!
To reduce the risk associated with choking:
-
Do not allow children under 3 years of age to have access to small parts during the installation of this product.
-
To reduce the risk associated with the ingestion of contaminants:
-
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts. EPA Establishment #91736‑MEX‑001.
CAUTION! To reduce the risk associated with property damage due to water leakage: -
Read and follow replacement Instructions before replacement of the filter cartridge.
-
Protect from freezing, remove filter cartridge when temperatures are expected to drop below 33° F (1° C).
How to replace the filter cartridge (Fig. 1)
IMPORTANT: The disposable filter cartridge must be replaced every 12
months, at the rated capacity or sooner if a noticeable reduction in flow rate
occurs.
Note: The system is equipped with an internal by‑pass valve.
-
Turn cartridge slowly to the left, about 1/4 turn, until it stops. At this position, both inlet and outlet ports are closed and water pressure has been
relieved. -
Pull used cartridge straight down and discard.
Note: There may be a small amount of residual water drainage after pressure is relieved and during cartridge removal. -
Make sure the o‑rings are positioned correctly in grooves. Moisten the o‑rings with water. Push new cartridge into filter head. Turn cartridge 1/4 turn to the right until it stops. Top surface of cartridge will become flush with bottom of the head when fully engaged.
-
Open faucet or down stream valve (if installed) and flush new filter cartridge for two minutes, expelling any trapped air and carbon fines. Water may run cloudy with air but will quickly clear.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>