UNITEK S1232A M.2 NVMe SSD Enclosure Adapter User Manual
- June 16, 2024
- UNITEK
Table of Contents
UNITEK S1232A M.2 NVMe SSD Enclosure Adapter User Manual
Thank you for choosing Unitek USB-C 10Gbps to SATA&M.2 NVMe SSD. Please read the user manual carefully before use and save them. If you need any help, please contact our professional customer service team at: support_us@unitek- products.com
Product Diagram
LED Indicator
Green:
- Light on when the power is connected.
Yellow:
- Light on to indicate the connection of the Disk accordingly;
- Light flashes during read/ write;
Package Contents
- 1 x USB-C 10Gbps to M.2 and SATA Adapter
- 1 x 12V/2A Power Adapter
How to Use
How to install the M.2 SSD:
- Insert the M.2 SSD diagonally down into the PCIe/ NVMe slot.
Notice: For your safety, please disconnect from the power before remove the M.2 SSD from the enclosure.
How to install the Hard Drive(HDD) or Solid-State Drive (SSD):
- Put off the cover.
- Insert the HDD or SSD to the SATA interface.
Safety Notes
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not modify the product in any way. Doing so voids the warranty.
- Do not drop the product and do not expose it to any major shocks.
- Keep this product, like all electrical products, out of the reach of children!
Technical Data
Compatibility:
A 10Gbps USB cable is for connecting
USB-C upstream devices
System Supported:
(PC, Laptop & Tablet)
Windows XP or later ver.
Mac OS X or later ver.
Linux.
USB Specification:
USB 3.2 Gen 2
Note
- With the M Key interface which belongs to the PCIe/NVMe protocol channel. When installing the SSD for this product, kindly be reminded to check the compatibility.
- The hard drive may not be moved after connecting the power supply unit to the socket. This could result in damage to the hard drive and data loss.
- The hard drive adapter may not be unplugged from the PC during data transfer under any circumstance. Data may be lost.
Warranty
The Unitek USB-C 10Gbps to SATA&M.2 NVMe SSD is covered by Unitek warranty for 24 months. If the product fails due to manufacturer defects, please contact us by email at: [email protected]
