HUANUO HNMS09 Dual Monitor Stand Instruction Manual
- June 16, 2024
- HUANUO
Table of Contents
Instruction Manual Monitor Stand Riser
HNMS09
Supplied Parts and Hardware
Tools Needed (Not Included)
How the Assembly System Works
How
to Install the Wood Dowels
Insert the wood dowel [C] at least half-way. IF NECESSARY, lightly tap the
wood dowel [C] with a rubber mallet.
Using the Cam Lock System
- Screw cam bolt [A] into the threaded hole on the panel. Insert the wood dowel [C] into the other hole.
- Connect both panels together. Make sure cam bolt [A] goes into the pre-drilled hole on the end of the panel for cam lock [B].
- Insert cam lock [B] into the large hole on the panel. Make sure the open slo faces the head of the cam bolt [A].
- Rotate cam lock [B] clockwise with a Phillips screwdriver to lock the ca bolt [A] in place.
1-800-556-0533 (US/CA)
44-808-196-3874 (UK)
support@huanuo.com
www.huanuo.com
860-00872-00 Rev02
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>