MOJOGEAR MG-33 W64 Multi Color Mini LED Kit Instruction Manual

MOJOGEAR- MG-33- W64 Multi-Color -Mini -LED -Kit

SUCTION CUP

With the suction cup, you can easily mount your LED light to a laptop, monitor or another surface. The suction cup is only included with the KIT version of this LED light.

Before use

Before applying the suction cup, remove the plastic film.

The suction cup works best on flat and smooth surfaces. For extra grip, stick the included double-sided sticker on the surface, before you attach the suction cup.

How to install the suction cup

Open the lock on the suction cup.Firmly press the suction cup against the surface. Close the lock. Screw the LED light onto the 1/4″ screw on top of the suction mount. Use the ring to secure the light.

How to adjust the direction

Turn the knobs on the suction cup to adjust the angle of the light. Tighten the knobs to prevent the light from moving during use.

How to to remove the suction cup

Open the lock on the suction cup.Gently pull at the tip of the suction cup. Remove the suction cup from the surface. When not in use, cover the suction cup with plastic film, to prevent it from getting dirty. If needed, the suction cup can be cleaned with water.

Introduction

Thank you for purchasing this MOJOGEAR W64 Multi-Color Mini LED light. We hope it will help you to unleash your creativity and create better videos.
If you have any questions or feedback, please let us know at support@mojogear.eu. We’d love to hear from you!

Safety instructions

• Do not use the light near explosive gases or flammable materials.
• Do not burn or incinerate the product.
• Do not expose the lamp to excessive heat, such as direct sunlight or fire. The product should not be used when the temperature is above 40°C.
• This product is not fully waterproof. Please pay attention when using in wet conditions.
• Do not charge the light in damp or wet conditions.
• Keep out of reach of children.

Battery instructions

• This product contains a rechargeable lithium battery. To charge the battery, please use a suitable charger.
• Rechargeable lithium batteries have a limited lifespan. Over time, the capacity of the battery will decrease.
• If you haven’t used the product for a long time, please charge the battery before using the product.
• To extend the lifespan of the battery, it’s recommended to charge the light once every three months.

Package contents

Buttons and parts

1. Cold shoe mount (3x)
2. Power button
3. Battery indicator
4. USB-C charging port
5. Cold shoe base
6. Color temperature adjustment
7. Brightness adjustment

How to use

Product Specifications Warranty

All MOJOGEAR products are covered by a 2-year warranty, calculated from the date of purchase.MOJOGEAR creates high-quality products for smartphone filmmakers, mobile journalists and everyone else who wants to get the most out of their phone or camera. MOJOGEAR is proudly based in The Netherlands. If you have any questions or feedback, please let us know at support@mojogear.eu. We’d love to hear from you!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>