LISEN 2E414 Three in One Desktop Folding Wireless Charger User Manual
- June 16, 2024
- Lisen
Table of Contents
2E414
User Manual
Thanks for choosing Lisen! To bring you a fantastic experience. please read the manual before using.
PRODUCT ACCESSORIES
PRODUCT STRUCTURE PHOTO
PRODUCT PARAMETER
PRODUCT NAME
LISEN 3·IN·1 FOLDABLE WIRELESS
CHARGING DESKTOP STAND
PRODUCT MODEL
2E414
SIZE
72″72″26SMM
WEICHT
161G
MATERIAL
ABS/ ZINC ALLOY
INPUT
SV /3A, 9V /3A
PHONE OUTPUT
SW/ 7.SW / lOW / lSW
EARPHONE OUTPUT
SW
WATCH OUTPUT
2.SW
PRODUCT DESCRIPTION
- This product is a 3·in·1 wireless charger that integrates wireless charging modules for phones, Earbuds, and Whtch. It can simulta· neously or individually wirelessly charge your phone, Earbuds, and Whtch, and can also be used as a desktop stand for your phone.
- It supports fast charging for iPhone 12/13/14, with a maximum power of lSW. It also supports charging for Airpods Pro (with Magsafe battery case) I Airpods Pro 2nd generation, with a maximum power of SW. Additionally, it supports charging for Apple Watch with a maximum power of 2.SW.
1. Pull up. 
2. Use the TypeC charging cable. 
3. Pull
out the charging watch panel from the back. 
4. Insert the watch charging board as shown above. 
COMPATIBLE DEVICES
- Headphones: Airpods pro (with magsafe battery compartment) / Airpods pro 2nd generation
- iphone 12/13/14 series naked/with magsafe case/third party case without magsafe case requires additional magnetizer (see tutorial below)
- For mobile phones with wireless charging that do not support magsafe, you need to use a magnet (refer to the following tutorial)
Tutorial on how to use magne tic magnets:
Tips: uneven surface of mobile phone cases, liquid silicone cases, oil sprayed cases, fabric and leather cases are not suitable for this magnetizer.
- If your case does not have the magsafe function, please follow the steps below to use the magnetic pad to achieve the magnetic suction function.
- Place the magnet locator on the back of the phone/case, aligning the edges of the phone and making sure the top and bottom/left and right scales are the same; remove the protective film from the magnet and stick it to the centre of the magnet locator.
NOTE
- Regarding the use of non-stan- dard chargers: please use PD30W and above adapters.
- Metal accessories (iron pieces finger rings) or credit cards can interfere with charging. Cases containing metal, such as Pitaka, Evutec and Spigen QNMP, will trigger foreign object detection and interrupt charging.
- Using the phone to watch videos or listen to music while charging will significantly affect the charing speed. When using applications such as players, the power consum ption may exceed the charging speed.
- It is normal for the wireless charger to heat up slightly during use. If you experience severe heating, please suspend use and contact our after-sales email.
PRODUCT WARN-INGS
FCC Warning Statement
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interfer- ence will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipm· ent off and on, the user is encour aged to
try to correct the interfer- ence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment must be installed and operated with a minimum distance of 15 cm between the radiator and user body.
AFTER SALE SERVICE
Lisen always dedicates to bring great shopping experience for each customer.
Please foel fre-e to contact us if you have any questions.
@LISEN Tech
****@LISEN Tech
suppott@LISEN.com
@LISEN Tech
365
DAY| Worry-free 365-Day
Warranty
---|---
24
HOURS| 24/7 Easy-to-Reach
Support Email
support@lisen.us.get
connection within 24 hours.
Shenzhen X angdangwen Technology Co., Ltd.
ADDRESS: 106, 1/F, No.313-4 Building
H uachang Road.Langkou
Community Dalang Street
Longhua District,
Shenzhen, China.
MANUFACTURE: Huizhou Yimai Ele- ctronics Technology Co.Ltd.
ADDRESS: 3rd Floor. Building B, Hu akai High-tech Industrial Park,
Electronic City Road, Longxi Street, Boluo County.
AMZLAB GmbH Laubenhof 23, 45326 Essen
UKCA SERVICE LTD 21 Ellesmere Avenue,Worsley,Manches- ter,UK,M28 OAL
Designed by LISEN
Made in ChinaLISEN.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>