EXPERTPOWER EP48100 PBMS Tools Deep Cycle Rechargeable Battery User Guide
- June 16, 2024
- ExpertPower
Table of Contents
EXPERTPOWER EP48100 PBMS Tools Deep Cycle Rechargeable Battery
PBMS Tools Instructions
In order to connect your EP48100 to a computer to monitor it with PBMS Tools you will need the following materials:
- USB to RS485 converter
- Cat5/Cat6 Cable
- RJ45 Connector
- Wire stripper with 24 gauge opening
- RJ45 crimper
- BMS Tools Software
Alternatively:
ANSI/TIA-568B RJ45 Cat5/Cat6 premade cable
If you plan to make your own cable, you will need to crimp the Cat5/Cat6 cable
in the ANSI/TIA-568B Standard to the RJ45 connector and the five-pin connector
on the RS485 side in the following order, leaving the mid pin empty.
PBMS Tools Software
Open BmsTools.exe
This is how the program looks.
From the dropdown menu, change ADR_ Start to 1.
Click Open.
You may now monitor your EP48100 Battery.
Customers Support
For Questions
And Support
(562) 630 – 3002
support@expertpower.us
Visit us at:
ExpertPower.us
6437 Alondra Blvd
Paramount, CA 90723
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>