EXPERTPOWER LiFePO4 24V 20A Smart Charger Instruction Manual

June 9, 2024
ExpertPower

EXPERT POWER LiFePO4 24V 20A Smart Charger

EXPERTPOWER-LiFePO4-24V-20A-
Smart-Charger-PRODUCT

Specifically Made for LiFePO4 Batteries

24V 20JA EPC2420

  • Intelligently Programed
  • Efficiently Easy
  • BMS Compatible

Specifications

  • Dimensions:
    • 8.5 x 4.75 x 2.75 in
  • Weight:
    • 3.9 lbsEXPERTPOWER-LiFePO4-24V-20A-Smart-Charger-FIG-2

Smart Charger ComponentsEXPERTPOWER-LiFePO4-24V-20A-Smart-Charger-
FIG-3

Warnings and Safety Instructions

Read all instructions before use. If the charger is damaged or wet do not use it! Save these instructions for future reference.

RISK OF SHOCK
Be aware of metal objects and possible contact with skin when operating.

RISK OF EXPLOSION
Use the product properly. Do not leave plugged in after charging is complete.

RISK OF FIRE
Insure flammable debris/materials are not near or obstructing components.

Warnings

  • Use with 24V LiFeP04 Rechargeable Battery pack only.
  • Use charger indoors only. Do not expose chargers to rain, snow, or excessively damp/moist environments such as bathrooms, greenhouses, or saunas.
  • Before use, check for and remove all debris (if present) from the alligator clips and battery terminals. Be sure that both the charger and battery pack are free of damage.
  • Do not open the charger casing or operate it after tampering with its internal components. Do not use the charger if the wires are frayed or internal components are exposed.
  • To reduce the risk of malfunction, the use of an attachment is not recommended. If you wish to use one; follow the instructions provided by the attachments’ manufacturer.
  • Do not operate with an extension cord unless absolutely necessary. T o use one follow the directions below. Improper use can result in malfunction or property damage.
    • Make sure the pins on the extension cord match the ones on the charger.
    • Make sure both the wall socket and extension cord are not damaged.
    • The extension cord must be the same AC ampere rating as the charger.
    • Plug the extension cord directly into a working AC wall socket.
  • If you suspect that the charger has been damaged due to water damage or being dropped do not operate it! NEVER charge a frozen or extremely hot battery.
  • Do not leave the charger operating longer than it takes to charge the desired battery pack. Never leave the charger plugged in after charging your battery pack.
  • To reduce the risk of damage follow the charging conditions approved by your batteries’ manufacturer. Doing so will keep your battery safe and extend its life.

Recommended Precautions

  • Keep out of reach of children. Battery and or Charger can become hot-to-the-touch.
  • Remove metal objects such as rings before operating the charger.
  • Operate on a flat heat resistant surface in a cool area with good ventilation.
  • Contact our support team for any questions, operation safety, or more information. Contact information is on the other side.
  • In the rare case of sever malfunction, shut the power off from breaker. If safe to approach use protective hand gear to prevent shock or burns. Otherwise, use fire extinguisher if possible or contact the appropriate local emergency services.

How To Connect And Operate your LiFeP04 Smart Charger

EXPERTPOWER-
LiFePO4-24V-20A-Smart-Charger-FIG-4

Operation Instructions

  1. Before Starting
    • Insure that the two alligator clips are separated, not touching each other, and that they are not touching any foreign metal objects or near flammable materials.
    • Connect the AC cord to your Smart charger before connecting it to the wall socket.
  2. Connecting to AC Power
    • Once you’ve followed the precautions in step 1, plug the AC cord directly into your AC wall outlet. LED1 will turn RED and LED 2 will turn Green when connected to the outlet.
    • Please read Warnings and Safety on another side of this manual if you plan on using an extension cord.
  3. Connecting to Battery
    • Make sure that you are charging the correct battery type for this charger.
    • First, connect the BLACK alligator clip to the Negative -Terminal.
    • Then, connect the RED alligator clip to the Positive (+ Terminal
    • LED 2 will turn RED to indicate charging is starting.
  4. Charging The Battery
    • The Smart Charger automatically implements the OV reset if necessary and the special 2-stage constant current/constant voltage (CC/CV) charge algorithm.
    • The LED indicators track its progress. When LED 2 turns Green your battery has finished charging.
    • DO NOT LEAVE IT UNATTENDED. Disconnect the charger from the battery first then unplug it from the wall outlet

For Questions And Support

Visit us at:
ExpertPower.us

(562) 630 3002
support@expertpower.us

5437 Alondra Blvd
Paramount, CA 90723

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ExpertPower User Manuals

Related Manuals