EXPERTPOWER LiFePO4 12V 5A Smart Charger Instruction Manual
- June 9, 2024
- ExpertPower
Table of Contents
LiFePO4
SMART CHARGER
12V 5A
EPC125
LiFePO4 12V 5A Smart Charger
Specifically Made for LiFePO4 Batteries
- Intelligently Programed
- Efficiently Easy
- BMS Compatible
Specifications
- Dimensions: 6.3 x 4.1 x 2.4 in
- Weight: 2.65 lbs
Smart Charger Components
Warnings and Safety Instructions
Read all instructions before use. If charger is damaged or wet do not use it!
Save these instructions for future reference.
RISK OF SHOCK
Be aware of metal objects and possible contact with skin when operating.
RISK OF EXPLOSION
Use product properly. Do not leave plugged in after charging is complete.
RISK OF FIRE
Insure flammable debris/materials are not near or obstructing components.
Warnings
-
Use with 12V LiFePO4 Rechargeable Battery pack only.
-
Use charger indoors only. Do not expose charger to rain, snow, or excessively damp/moist environments such as bathrooms, greenhouses, or saunas.
-
Before use, check for and remove all debris (if present) from the alligator clips and battery terminals. Be sure that both charger and battery pack are free of damage.
-
Do not open charger casing or operate it after tampering with it’s internal components. Do not use charger if the wires are frayed or internal components are exposed.
-
To reduce risk of malfunction, use of an attachment is not recommended. If you wish to use one; follow the instructions provided by the attachments’ manufacturer.
-
Do not operate with an extension cord unless absolutely necessary. To use one follow the directions below. Improper use can result in malfunction or property damage.
Make sure the pins on extension cord match the ones on the charger.
Make sure both wall socket and extension cord are not damaged.
Extension cord must be the same AC ampere rating of charger.
Plug extension cord directly into a working AC wall socket. -
If you suspect that the charger has been damaged due to water damage or being dropped do not operate! NEVER charge a frozen or extremely hot battery.
-
Do not leave charger operating longer than it takes to charge desired battery pack. Never leave the charger plugged in after charging your battery pack.
-
To reduce the risk of damage follow the charging conditions approved by your batteries’ manufacturer. Doing so will keep your battery safe and extend it’s life.
Recommended Precautions
- Keep out of reach of children. Battery and or Charger can become hot-to-the-touch.
- Remove metal objects such as rings before operating the charger.
- Operate on a flat heat resistant surface in a cool area with good ventilation.
- Contact our support team for any questions, operation safety, or more information. Contact information on the other side.
- In the rare case of sever malfunction, shut power off from breaker. If safe to approach use protective hand gear to prevent shock or burns. Otherwise, use fire extinguisher if possible or contact the appropriate local emergency services.
How To Connect And Operate your LiFePO4 Smart Charger
Operation Instructions
-
Before Starting
Choose either Alligator Clips or Bolt -Screw Wire cord and connect one to your Smart charger. Insure that the two alligator clips and or ends of Bolt screws are separated, not touching each other, and that they are not touching any foreign metal objects or near flammable matrials. -
Connecting to AC Power
Once you’ve followed the precautions on step 1, plug the AC cord directly to your AC wall outlet. The LED will light up Green when connected to the outlet.
Please read Warnings and Safety on other side of this manual if you plan on using an extension cord. -
Connecting to Battery
Make sure that you are charging the correct battery type for this charger. For Bolt-Screw Connectors, unscrew the terminal bolts before starting.
First, connect the BLACK Alligator Clip or Bolt-Screw Connector to the Negative (–) Terminal.
Then, connect the RED Alligator Clip or Bolt-Screw Connector to the Positive (+) Terminal.
LED will turn RED to indicate charging is starting. -
Charging The Battery
The Smart Charger automatically implements the OV reset if necessary and the special 2-stage constant current/constant voltage (CC/CV) charge algorithm.
The LED indicator will track its progress. When LED turns Green your battery has finished charging.
DO NOT LEAVE UNATTENDED. Disconnect charger from battery first then unplug from the wall outlet.
For Questions And Support
Visit us at: ExpertPower.us
(562) 630 – 3002
support@expertpower.us
6437 Alondra Blvd
Paramount, CA 90723