kinderkraft ASTON Tricycle User Manual

: June 16, 2024
: Kinderkraft

Table of Contents

kinderkraft ASTON Tricycle
Product Information
Product Usage Instructions
SAFETY INSTRUCTIONS AND PRECAUTIONS
Components of the tricycle
Assembling the tricycle
Adjusting the tricycle
Maintenance and cleaning
Read User Manual Online (PDF format)
Download This Manual (PDF format)

kinderkraft ASTON Tricycle

kinderkraft-ASTON-Tricycle-product

Product Information

Specifications

Model: Aston
Manufacturer: 4Kraft Sp. z oo
Version: 1.3

Product Usage Instructions

Safety Instructions and Precautions

Attention:
Compliance with the user manual ensures the safe use of the toy. Read the user manual carefully before using the bike and keep it for future use. Recommended for children from the age of 9 months.

Use personal protective equipment such as helmets, gloves, elbow pads, and knee pads. This product is intended for outdoor use. Do not use it in road traffic.

Assembly
To assemble the tricycle, follow these steps:

Step 1: Insert the handlebar into the designated hole on the tricycle frame.
Step 2: Attach the wheels to the tricycle frame using the provided bolts and tighten them securely.
Step 3: Attach the seat to the tricycle frame using the provided screws and tighten them securely.
Step 4: Attach any additional accessories, such as the safety belts or canopy, according to the instructions provided.

Adjustment
To adjust the tricycle, follow these steps:

Step 1: Adjust the seat height to ensure proper leg positioning for the child. Use the provided adjustment mechanism.
Step 2: Adjust the handlebar height to ensure a comfortable grip for the parent. Use the provided adjustment mechanism.
Step 3: Check that all screws and bolts are tightened securely before each use.

Maintenance and Cleaning
Proper maintenance and cleaning of the tricycle will ensure its longevity. Follow these guidelines:

Do not use bleach or harsh chemicals when cleaning the tricycle.
Do not put the tricycle in a tumble dryer.

FAQ

Q: What age is this tricycle suitable for?
A: This tricycle is recommended for children from the age of 9 months.
Q: Can I use this tricycle on the road?
A: No, this tricycle is intended for outdoor use but should not be used in road traffic.

All rights to this data are entirely reserved to 4Kraft Sp. z o.o. Any unauthorized use or misuse, including usufruct, copying, duplication and sharing, wholly or partially, without consent of 4Kraft Sp. Z o.o. may result in legal consequences.

Dear customer
Thank you for purchasing a Kinderkraft product. We design our bicycles with your child in mind – we always care about safety and quality, which guarantees that with the purchase of our products, you get the comfort of the best possible choice.

IT IS IMPORTANT TO KEEP THIS MANUAL FOR FUTURE USE.

SAFETY INSTRUCTIONS AND PRECAUTIONS

Attention:

Compliance with the user manual ensures the safe use of the toy. Read the user manual carefully before using the bike and keep it for future use. Recommended for children from the age of 9 months
Use personal protective equipment such as helmets, gloves, elbow pads and knee pads. This product is intended for outdoor use. Do not use it in road traffic.
The kid’s cruiser bike should not be used near motor vehicles, streets, swimming pools, hills, roads, stairs or on uneven ground.
Use the toy on flat, obstacle-free surfaces.
To avoid serious injuries, continuous adult supervision is necessary.
To avoid falls and collisions causing injury to the user or others, parents/guardians should draw children’s attention to the safety precautions to be taken. Before using the product, it is important to explain to children how to use it safely.
The person using the product must always wear shoes.
Assembly must always be carried out by an adult. Before each use, check that the item is not damaged or worn and that all assembly and fastening parts are in good condition. Ensure that the bolts and nuts retain their auto-locking properties. Check that the assembly is complete and in good condition. If you notice that some parts are missing or damaged, do not use the product, but contact your retailer.
Be careful when riding bicycles, you should know how to ride to avoid falls or collisions that could cause injury to the user or a third person.
The safest areas for persons using the bicycle are those with little or no vehicular traffic, such as private areas, playgrounds, schoolyards, and school playgrounds.
Maximum user weight − 25 kg
Keep the packaging or dispose of it under local regulations.
For the safety of children, do not leave parts of the packaging freely accessible (plastic bags, cardboard boxes, etc.). Risk of suffocation!

Components of the tricycle

Frame with brake
Rear wheels
Front fork with screws
Bumper with a screw
Front-wheel
Steering
Bell with fixing screw
Cap of the handlebar screw
Rod
Seat with cover and belts
Side shields x 2
Canopy
Basket
The bottom part of the handle for the parent
The upper part of the handle for the parent
Sachet
Cupholder
Mounting spanner 1
Mounting spanner 2
Seat base

$kinderkraft-ASTON-Tricycle-fig- $1$$ $kinderkraft- ASTON-Tricycle-fig- $2$$ $kinderkraft-ASTON-Tricycle-fig- $3$$

Assembling the tricycle

WARNING! Keep small items out of reach of children.
Remove the protection from the rear wheel bolts (2) and connect the wheels to the frame (1) (fig. A). Using the mounting spanner (18), unscrew the screw fixed on the bumper (4) and then attach the bumper to the front fork (3) using this screw (fig. B). Unscrew the fastening screws from the fork, slide the fork one by one onto the plastic pins located on the front wheel (5) (fig. C) and secure it on both sides with the previously unscrewed fastening screws (fig. D). Connect the folded parts of the frame and fork (fig. E). Make sure that the notch on the mudguard is in the direction of the travel side, the plastic element for mounting the pull rod (9) must be on the left side. Screw the bell (7) to the steering (6) and slide the cap (8) on (fig. F). Connect the folded frame and handlebars, paying attention to the correct positioning of the holes in the fork and handlebars (fig. G), using the screw (fig. H). To connect the parental handle to the handlebars, insert the end of the rod (9) without the nut into the hole on the side of the front fork (fig. I). Unscrew the nut from the other end of the rod and fasten it to the back of the frame, in the place where the parental handle is attached. Tighten the nut (fig. J). Pay attention to the correct assembly of the pull rod, if it is placed in the wrong hole, the steering wheel and the parent’s handle will not be straight at the same time. Attach the side shields (11) to the seat (10) as shown in Fig. K. Remove the nut from the bolt under the seat and then put the seat bolt through the hole in the base (20) and frame (fig. L). Lower the footrest by pulling the grey lever (fig. M) and fasten the seat by tightening the nut (fig. N). Slide the loose trim strip into the side shields (11) and fasten them (fig. O). Insert the canopy (12) into the holes at the back of the backrest and secure it with the levers (fig. P). Fold out the canopy as needed (fig. Q). Unscrew the fixing screw attached under the parental handle hole on the frame and use it to fix the basket (13) to the frame (1) (fig. R). Connect both parts of the parental handle (14 & 15) (fig. S) and then insert them into the hole at the back of the frame (above the basket) (fig. T). Slide the cupholder into the parental holder and hang the sachet (fig. U). Optionally, you can set the seat rear-facing to the direction of travel (fig. V).

$kinderkraft-ASTON-Tricycle-fig- $4$$ $kinderkraft- ASTON-Tricycle-fig- $5$$ $kinderkraft-ASTON-Tricycle-fig- $6$$ $kinderkraft-ASTON-Tricycle-fig- $7$$ $kinderkraft-ASTON-Tricycle-fig- $8$$ $kinderkraft-ASTON-Tricycle-fig- $9$$ $kinderkraft-ASTON-Tricycle-fig- $10$$

Adjusting the tricycle

Position of the canopy – canopy length is adjustable. It has an additional sun shade, which can be pulled out from underneath.
Footrest − depending on the level of the child’s development, the footrest may be folded/unfolded to enable the child to ride the tricycle independently. Whenever the footrest is unfolded, enable the pedal lock in the front wheel (red lever). WARNING! Whenever the parent’s handle is mounted and the footrest is unfolded, the wheel lock should be disengaged so that the pedals rotate freely without causing the wheel to move (transmission off). Without disengaging the lock, feet may be crushed or injured! After removing the parent handle, fold up the footrest and engage the wheel lock so that the pedals set the wheel in motion (transmission on). To unfold/fold footrests, pull the lever (fig. M), then adjust them in a comfortable position.
Adjust the belts − adjust their length to hold the child firmly, but not to block its movements.
Seat position − the seat can be adjusted forwards and backwards and turned rearwards. To do this, unscrew the nut and set the appropriate position. After tightening, make sure the seat is securely fastened. The tricycle can be adapted for older children by removing the safety belts, the rod, seat covers, hood, side shields and the handle for parents and folding the footrest.
Adjusting the length of the handle for the parent – press the button (Fig. S), slide down and snap the handle in a lower position, if the previous length was too high.

Maintenance and cleaning

$kinderkraft-ASTON-Tricycle-fig- $11$$

Seat cover, and textile cover of the handlebar: Remove from the frame and clean according to the label.

Hood, belts: Do not wash. Do not bleach. Do not dry in a tumble dryer. Do not iron. Do not dry clean. Clean with a clean and damp cloth using mild soap. Allow to air dry. Do not immerse in water.
Frame: Clean the metal frame with a soft, clean and damp cloth using mild soap.

Storage
Keep out of the reach of children.

In the interests of our Clients – we are at your disposal! If you have a problem with the product you received, contact us in the most convenient way for you!