nathan james 71801 Jasper Storage Unit Installation Guide

Jasper Storage Unit
Let’s build the
SKU 71801

71801 Jasper Storage Unit

https://qrcodes.pro/pcwlsU

Ok, let ’s get rolling
This should be easy, just follow our instructions and you will be back to Netflix in no time.

Estimated time for assembly

What you need

• Some of your favourite bubbly or your preferred relaxant
• Use the packaging carton as a working surface to prevent product damage during assembly
• Phillips head screwdriver
• Drill
• 5/16” Drill bit

Weight Limitation

What’s included

| Description| Qty
---|---|---
A| Left Side Panel| 1
B| Right Side Panel| 1
C| Top Stretcher – Front| 1
D| Top Stretcher – Back| 1
E| Bottom Stretcher – Back| 1
F| Bottom Panel| 1
G| Bottom Leg Frame Stretcher| 2
H| Bottom Leg| 2
I| Back Panel| 2
J| Top Panel| 1
K| Shelf| 1
L| Left Door| 1
M| Right Door| 1

The goods

IMPORTANT

1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.
2. Do not over tighten screws and bolts to avoid stripping.
3. Please use hand tools to assemble this product. Do not use power tools.

What’s included cont.

| Description| Qty
---|---|---
1| 1/4” x 1-3/16” Hex Button Head Bolt| 6
2| 1/4” x 1-3/4” Hex Button Head Bolt| 2
3| 1/4” x 2-3/16” Hex Button Head Bolt| 22
4| 1/4” x 2-3/4” Hex Button Head Bolt| 2
5| 1/4” x 3/8” Spring Washer| 22
6| 1/4” x 1/2” Flat Washer| 22
7| Crescent Spacer| 10
8| 1/4” x 15MM Barrel Nuts| 4
9| Allen Key| 1
10| 830MM Wooden Dowel| 16
11| Handle| 2
12| M3.515MM Screw| 4
13| Hinge| 4
14| M315MM Screw| 24
15| Shelf Pin| 4
16| M312MM Screw| 4
17| Plastic Bracket| 2
18| Non-drywall Wall Anchor| 2
19| M3.515MM Screw| 2
20| Plastic Tether| 1
21| M450MM Screw| 2
22| Drywall Wall Anchor| 2
23| Magnetic Catch| 2
24| M3.5*16MM Screw| 4
25| Leveler (Extra)| 2

The goods

Step 1
It’s as easy as it looks! Attach the Magnetic Catches (23) to the Top Stretcher – Front (C) using the M3.5*15MM Screws (24).

Step 2
Secure the Top Stretcher – Front (C) to the Left Side Panel (A) by tightening a 1/4” x2-3/16” Hex Button Head Bolt (3) through a Crescent Spacer (7).

Then, place four Wooden Dowels (10) in the pre-drilled holes on the bottom of the Left Side Panel (A) and secure the Bottom Stretcher – Back (E) and Top Stretcher – Back (D).

Step 3
You’re getting the hang of this! Insert four more Wooden Dowels (10) to the Right Side Panel (B) and secure to the stretchers from Step 1 and 2.

Step 4
Secure the Bottom Panel (F) by inserting a Wooden Dowel (10) on all four corners then securing with a 1/4” x 1/2” Flat Washer (6), 1/4” x 3/8” Spring Washer (5), and 1/4” x 2-3/16” Hex Button Head Bolt (3).

Tighten the bottom of the Bottom Panel (F) with a 1/4” x 1/2” Flat Washer (6), 1/4” x 3/8” Spring Washer (5), and 1/4” x 1-3/16” Hex Button Head Bolt (1). Do this twice in the corresponding predrilled holes.

Step 5
Attach two Bottom Leg Frame Stretchers (G) with a 1/4” x 1/2” Flat Washer (6), 1/4” x 3/8” Spring Washer (5), and 1/4” x 2-3/16” Hex Button Head Bolt (3).

Step 6
You’re a pro now! Use the Allen Key (9) to tighten a 1/4” x 1/2” Flat Washer (6), 1/4” x 3/8” Spring Washer (5), and 1/4” x 2-3/16” Hex Button Head Bolt (3) to attach the Bottom Legs (H) to the Bottom Panel (F).

Step 7
Tighten a 1/4” x2-3/16” Hex Button Head Bolt (3) through a Crescent Spacer (7) on all four corners of the Bottom Leg Frame Stretchers (G).

Step 8
Carefully flip the unit right side up and slide in the Back Panels (1).

Step 9
Attach the Top Panel ( J) using two sets of Wooden Dowels (10) and two sets of 1/4” x 1/2” Flat Washers (6), 1/4” x 3/8” Spring Washers (5), and 1/4” x 1-3/16” Hex Button Head Bolts (1) on each side of the Panel. Secure the top of the Panel using a set of 1/4” x 1/2” Flat Washers (6), 1/4” x 3/8” Spring Washers (5), and 1/4” x 2-3/4” Hex Button Head Bolts (4).

Step 10
Carefully push in four Shelf Pins (15) at your desired shelf height.

Step 11
Place the Shelf (K) on top of the Shelf Pins (15) from Step 10, and secure using four M3*12MM Screws (16).

Step 12
Attach the two Hinges (13) to the Left (L) and Right (M) doors using four M3*15MM Screws (14) and a Phillips head screwdriver.

Step 13
Next, secure the Left (L) and Right (M) doors by tightening the Hinges (13) to the unit with four M3*15MM Screws (14).

Is your cabinet door looking crooked or unevenly spaced?

Then you’ve come to the right place. Follow the illustrations below to get your cabinet door aligned and ready for action.

Step 14
Let’s add those finishing touches! Secure the Handles (11) onto the doors using two M3.5*15MM Screws (12) per Handle.

Is your cabinet door looking crooked or unevenly spaced? (Cont.)

If you’re still having trouble lining everything up, your next step should be to try to adjust the feet slightly to square up the cabinet & doors. Follow the illustrations below:
If the right door appears to be hanging low, you can adjust the adjustable leveler on the front right until the door is better aligned.

If the left door appears to be hanging low, you can adjust the adjustable leveler on the front left until the door is better aligned.

Step 15
Safety first! Let’s get this storage unit secured to the wall. Find where you want this storage unit to live and then mount the Plastic Bracket (17) to the wall using the provided Wall Anchors (18) or (22) and M4*50MM Screws (21). We recommend using a 5/16”  drill bit.

IMPORTANT NOTE:
Non-Drywall Anchor (18) requires 5/16” Drill Bit Drywall Anchor (22) requires 5/16” Drill Bit

Step 16
Secure the other Plastic Bracket (17) to the back of the storage unit using the M3.5*15MM Screws (19) and then secure the storage unit to the wall by looping the Plastic Tether (20) through both brackets.
You did it! Time for a celebratory pizza?
The answer to that is always yes!

No heartburn, when we handle the return

Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.

Our way

| Give us a call
---|---
| Replacement
| You

Their way

| Replacement
---|---
| Re-package item
| Schedule pick up
| Track package
| You

We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.

Safety first, fun later

We want your product to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months.
For proper care and treatment, please check our website at NathanJames.com/products

Safe use of this product starts with you.
Use this product responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.

Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which NJ will not be responsible for.

Proper use

We are only in business if you’re happy
For starters, thanks for being you.

Toll-free at 1-866-619-1004
Help@nathanjames.com
****NathanJames.com/help

We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q

https://qrcodes.pro/JxgdKe

References

• Collections
• Product Warranty | Nathan James

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>