QUOLIX Q-368 Fashion Walkie Talkie User Guide

QUOLIX Q-368 Fashion Walkie Talkie

OVERVIEW

LCD Indication

Button function description

Function Setting

1. This walkie-talkie has a built-in polymer lithium battery. Long press the power button for around 3 seconds to turn it on or off.
2. Press the MENU button once to enter the channel setting, the backlight lights up 6S, and the channel code flashes, press the +/- button to select a channel. Press the PTT button to confirm and exit.
   • USA frequency FRS CH01-CH22****
     Ch.| freq(MHz)| Ch.| freq(MHz)
     ---|---|---|---
     1| 462.5625| 12| 467.6625
     2| 462.5875| 13| 467.6875
     3| 462.6125| 14| 467.7125
     4| 462.6375| 15| 462.5500
     5| 462.6625| 16| 462.5750
     6| 462.6875| 17| 467.G000
     7| 462.7125| 18| 467.6250
     8| 467.5625| 19| 462.6500
     9| 467.5875| 20| 462.6750
     10| 467.6125| 21| 462.7000
     11| 4fl7.6]75| 22| 41\2.72511
3. Press the “Menu” twice to enter the “Code Setting” OFF means no code, 01 code is 67Hz, and the 39-99 code is DCS code CTCSS 01–38 CODE.
   • DCS CODE****
     39| 023| 49| O71| 59| I34| 69| 223| 79| 306| 89| 411
     ---|---|---|---|---|---|---|---|---|---|---|---
     40| 025| 50| 072| 60| 143| 70| 226| 80| 31t| 90| 412
     41| 026| 51| 073| 61| 152| 71| 243| 81| 315| 91| 413
     42| 031| 52| 074| 62| 155| 72| 244| 82| 331| 92| 423
     43| 032| 53| 114| 63| 156| 73| 245| 83| 343| 93| 431
     44| 043| 54| 115| 64| 162| 74| 251| 84| 346| 94| 432
     45| 047| 55| 116| 65| 165| 75| 261| 85| 351| 95| 445
     46| 051| 56| 125| 66| 172| 76| 263| 86| 364| 96| 464
     47| 054| 57| 131| 67| t74| n| 265| 87| 365| 97| 465
     48| 065| 58| 132| 68| 205| 78| 271| 88| 371| 98| 466
     | | | | | | | | | | 99| 503
4. Press the “Menu” 3 times to enter the “Voice-Activated/VOX” selection. There are 3 sensitivities for options, “OFF”, ” 1″, “2” and “3”.
5. Press the “Menu” four 4 times to set the “Call Tone”.
   • There are 10 kinds of ringtones to choose from.
6. Button Sound–Press the MENU button 5 times to enter the button tone setting. There are ON/OF options.
   • ON means there is a tone when pressing a button.OF means it is silence when pressing a button.
7. Press the MENU button 6 times to enter the call end tone setting. There is an ON/OF option. When you select the “ON” button, the call end tone will sound.
   • If you select the “OFF” button, there will be no tone.
   • Press “PTT” to confirm and exit.
8. Press the MENU button 7 times to exit the setting.
   • You can also press “PTT” to confirm it and exit the settings menu.

FM function

• Under standby mode, Press the WX/FM button twice to enter FM mode. Press the MENU button to search radio station automatically, it will stop when it is gained.
• Also, you can press the CALL or SCAN button to increase or decrease the frequency. Press +/- to adjust its volume.

Charging

When the battery is low, please charge it with a 5V/1A adapter inserted input charging port. Usually, it will be fully charged in about 4 hours. Flashing blue light means charging; stable blue light means fully charged.

Weather Function

• In the walkie-talkie state, press the FM/WX button once to enter the weather mode. The horn sounds are white noise “rustling” now, Each channel will have a corresponding sound.
• Under air forecast, it can receive walkie-talkie frequency. Weather forecast frequency table switching frequency: Press the CALL/SCAN keys to set the frequency(CH1–CH10)

Weather forecast 1050Hz mode

• In WX mode, an icon appears, press the menu button to set OFF/ON.
• When set to ON, the weather forecast mode is silent, no rustling noise.
• Then, it can receive both the walkie-talkie signal and the predetermined weather channel at the same time. (Only US frequencies have NOAA functionality)

SOS

1. Alertor
   • Press and hold the Alarm button briefly, and the machine will beep “Woo…woo”, which is conducive for outdoor search and rescue.
2. Flashlight
   • Press the flashlight button briefly and it will light up.
   • Press it again to exit.

FCC

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received including interference that may cause undesired operation.

• This radio is designed for and classified as General population/uncontrolled Use DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits.
• A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio.
• DO NOT transmit for more than 75% of total radio use time, more than 75% of the time can cause RF exposure compliance requirements to be exceeded.
• The separation distance between the user and the device or its antenna shall be at least 25mm (Face-held)/10mm(body-worn).
• The highest reported SAR values for Face-held body-worn are 0.456W/Kg and 1.391W/Kg.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>