belkin WSC010 Wemo Stage Smart Scene Controller User Manual

: June 16, 2024
: belkin

Belkin WSC010 Wemo Stage Smart Scene Controller

Product Information

What is the Wemo Stage Smart Scene Controller, WSC010?
The Wemo Stage Smart Scene Controller, WSC010, is a device that allows you to control and activate HomeKit Scenes using physical buttons. It is designed to simplify and enhance your smart home experience.
What are HomeKit Scenes?
HomeKit Scenes are pre-configured combinations of actions that can be triggered with a single command or button press. They allow you to control multiple smart devices simultaneously, creating customized environments or scenarios.
How long is the warranty for the Wemo WSC010?
The Wemo WSC010 comes with a 3-year warranty.
Does the Wemo WSC010 have a connected equipment warranty (CEW)
No, the Wemo WSC010 does not have a connected equipment warranty (CEW).
Is it MFi-certified?
No, the Wemo WSC010 is not MFi-certified.
Is the Wemo WSC010 Apple HomeKit-certified?
Yes, the Wemo WSC010 is Apple HomeKit-certified.
Is the Wemo WSC010 Proposition 65 certified?
Yes, the Wemo WSC010 is Proposition 65-certified.
Is the Wemo WSC010 RoHS-certified?
Yes, the Wemo WSC010 is RoHS-certified.
What are the available colors of the Wemo WSC010?
The Wemo WSC010 is available in white.

What is included in the package with the Wemo WSC010?

The package includes

```
* Wemo WSC010
```
- Magnetic wall mount with faceplate
- A CR2032 coin cell battery
- Quick start guide
- Regulatory information

Hardware Information

What wireless standard does the Wemo WSC010 use?
The Wemo WSC010 supports Bluetooth 5.0 Low Energy (BLE 5.0).
Does it support Near Field Communication (NFC)?
Yes, the Wemo WSC010 supports NFC for setup.
Is it rechargeable?
No, the Wemo WSC010 uses a non-rechargeable, user-replaceable battery.

Setup and Installation

What is needed to set up the Wemo WSC010?

To set up the Wemo WSC010, you will need:
A compatible Apple device with iOS 14 or later
An active Wi-Fi network
The Wemo app downloaded and installed on your device
The Home app installed on your device (for Apple HomeKit setup)

How do I install or replace the battery in the Wemo WSC010?

To install or replace the battery in the Wemo WSC010

Remove the back cover of the Wemo WSC010 by sliding it off.
Take out the old battery (if present) and dispose of it properly.
Insert a new CR2032 coin cell battery into the battery compartment with the positive (+) side facing up.
Slide the back cover back into place until it clicks securely.

Where do I locate the HomeKit code for the Wemo WSC010?

The HomeKit code for the Wemo WSC010 can be found on the back of the device or in the product documentation.

How do I add the Wemo WSC010 to an Apple Home network?

To add the Wemo WSC010 to an Apple Home network:
Open the Home app on your Apple device.
Tap the “+” button to add a new accessory.
Scan the HomeKit code on the Wemo WSC010 using your device’s camera or enter the code manually.
Follow the on-screen instructions to complete the setup process.

How do I wall mount the Wemo WSC010?

To wall mount the Wemo WSC010:

Choose a suitable location on the wall.
Attach the magnetic wall mount to the wall using screws or adhesive (not included).
Align the Wemo WSC010 with the wall mount and let it snap into place magnetically.

How do I create a Scene in the Apple Home app?

To create a Scene in the Apple Home app

Open the Home app on your Apple device.
Tap the “+” button to add a new automation.
Select “Create Scene”.
Choose the desired accessories and actions for the Scene.
Assign a name to the Scene and customize any additional settings.
Save the Scene and it will be available for control with the Wemo WSC010.

Functionality

What is the range of the Wemo WSC010?

The range of the Wemo WSC010 depends on the Bluetooth signal strength and environmental factors.
In general, it can work reliably within a range of approximately 30 feet (9 meters) from the connected Apple device.

What do the status lights mean on the Wemo WSC010?

The Wemo WSC010 has LED indicator lights that provide status information:
Solid green: The Wemo WSC010 is connected and functioning properly.
Flashing green: The Wemo WSC010 is in pairing mode.
Flashing red: The Wemo WSC010 battery is low and needs to be replaced.

How many Scenes can the Wemo WSC010 be set to control?
The Wemo WSC010 can be set to control up to six different Scenes.
How does the Wemo WSC010 control six Scenes with only three buttons?
The Wemo WSC010 uses a combination of button presses and long presses to cycle through and activate different Scenes. Each button can be programmed to trigger multiple actions depending on the duration of the press.
How does the Wemo WSC010 connect to the wall mount cradle?
The Wemo WSC010 connects to the wall mount cradle magnetically. It snaps into place securely and can be easily removed when needed.
Does the Wemo WSC010 wall mount cradle require the faceplate before it can be used?
No, the faceplate is optional and can be used for aesthetic purposes or to cover any existing wall switch openings. The wall mount cradle can be used without the faceplate.
How do I upgrade the firmware of the Wemo WSC010?
To upgrade the firmware of the Wemo WSC010:

Ensure that your Wemo WSC010 is connected to the Wemo app.
Open the Wemo app on your device.
If a firmware upgrade is available, you will be prompted to install it. Follow the on-screen instructions to proceed with the upgrade.

Troubleshooting

How do I reboot the Wemo WSC010?

To reboot the Wemo WSC010, simply remove and reinsert the battery.

How do I factory restore the Wemo WSC010?

To factory restore the Wemo WSC010:

Remove the battery from the Wemo WSC010.
Press and hold the reset button located inside the battery compartment.
While holding the reset button, reinsert the battery.
Continue holding the reset button for about 10 seconds until the LED lights flash rapidly.
Release the reset button and the Wemo WSC010 will be restored

PRODUCT INFORMATION

What is the Wemo Stage Smart Scene Controller, WSC010?

What are HomeKit Scenes?

In HomeKit, Scenes allow you to control multiple accessories at the same time. Using a Scene, it is possible to have multiple functions happen at once depending on the devices in the Scene. For example, you can create a night- time Scene that dims the lights in your rooms and turns ON your porch lights. You can also create a movie time Scene that dims the lights and turns ON your home theater equipment and your television. Scenes are created using the HomeKit app on your iOS or macOS® device.

How long is the warranty for the Wemo WSC010?

The Wemo WSC010 has a 3-year warranty.

Does the Wemo WSC010 have a connected equipment warranty CEW?

No.

Is it MFi-certified?

No.

Is the Wemo WSC010 Apple HomeKit-certified?

Yes.

Is the Wemo WSC010 Proposition 65-certified?

Yes.

Is the Wemo WSC010 RoHS-certified?

Yes.

What are the available colors of the Wemo WSC010?

It is available in white - WSC010.

What is included in the package with the Wemo WSC010?

Below are included in the package Wemo WSC010 Magnetic wall mount with faceplate A CR2032 coin cell battery Quick start guide Regulatory information

HARDWARE INFORMATION

What wireless standard does the Wemo WSC010 use?

The Wemo WSC010 supports Bluetooth 5.0 Low Energy BLE 5.0.

Does it support Near Field Communication NFC?

Yes. It supports NFC for setup.

Is it rechargeable?

No. The Wemo WSC010 uses a non-rechargeable, user-replaceable battery.

What type of battery does the Wemo WSC010 use?

It uses a CR2032 coin cell battery.

How many buttons are on the Wemo WSC010?

It has three physical buttons.

What are the dimensions and weight of the Wemo WSC010?

Below are the dimensions of Wemo WSC010. Remote Height - 6.64 cm Length - 3.28 cm Width - 0.9 cm Cradle Height - 10.5 cm Width - 4.4 cm Faceplate Height - 12.8 cm Width - 8.4 cm The weight of the Wemo WSC010 is 0.17 lb.

Are there any status lights on the Wemo WSC010?

Yes. There is a dual-color status light.

What are the operating and storage temperatures of the Wemo WSC010?

Operating temperatures 0°C to 40°C 10% to 80% humidity Storage temperatures 40°C to 60°C 5% to 90% humidity

What type of faceplate does the Wemo WSC010 wall mount cradle use?

The wall mount cradle of the Wemo WSC010 uses a standard size Decora faceplate. The faceplate is designed to snap onto the cradle. If you are using a third-party faceplate, you will need to use screws to attach it.

What type of adhesive is used to attach the Wemo WSC010 to the wall?

The cradle comes with a pre-installed 3M double-sided tape.

answer-10=

answer-11=

answer-12=

COMPATIBILITY

What equipment is required to use the Wemo WSC010?

What can I control with the Wemo WSC010?

The Wemo WSC010 is designed to activate Apple Home Scenes, individual devices, and groups of devices.

Does the Wemo WSC010 work with Amazon Alexa?

No.

Does the Wemo WSC010 work with Google Home™?

No

Does the Wemo WSC010 work with Siri®?

No.

Does the Wemo WSC010 work remotely?

No. It is designed to work on your local network by connecting to a home hub device.

Does the Wemo WSC010 work with the Wemo app?

No.

Does the Wemo WSC010 work with Wemo accounts?

No

Can the Wemo WSC010 control non-Wemo devices?

Yes. The Wemo WSC010 activates Apple Home Scenes which control your HomeKit- enabled devices.

Can the Wemo WSC010 be used with Android™ devices?

No. The Wemo WSC010 requires the Apple Home app for setup. The Apple Home app is only available on iOS and macOS devices.

Can the Wemo WSC010 connect to my WiFi?

No

Can the Wemo WSC010 control my Wemo devices?

The Wemo WSC010 can control HomeKit-enabled Wemo devices that are part of an Apple Home and part of a Scene.

Does the Wemo WSC010 control Wemo Rules?

No

answer-13=

SETUP AND INSTALLATION

What is needed to set up the Wemo WSC010?

The Wemo WSC010 needs the following to set up A Wemo WSC010 HomeKit-compatible smart devices and accessories A home hub running the latest software

How do I install or replace the battery in the Wemo WSC010?

Where do I locate the HomeKit code for the Wemo WSC010?

How do I add the Wemo WSC010 to an Apple Home network?

How do I wall mount the Wemo WSC010?

How do I create a Scene in the Apple Home app?

FUNCTIONALITY

What is the range of the Wemo WSC010?

The Wemo WSC010 has a range of up to 30 ft.

What do the status lights mean on the Wemo WSC010?

How many Scenes can the Wemo WSC010 be set to control?

How does the Wemo WSC010 control six Scenes with only three buttons?

How does the Wemo WSC010 connect to the wall mount cradle?

It uses magnets.

Does the Wemo WSC010 wall mount cradle require the faceplate before it can be used?

No. The faceplate is purely cosmetic.

How do I upgrade the firmware of the Wemo WSC010?

TROUBLESHOOTING

How do I reboot the Wemo WSC010?

How do I factory restore the Wemo WSC010?

How do I troubleshoot general control issues of the Wemo WSC010?

Below are the basic troubleshooting steps for control issues Make sure that your home hub is using the latest software. Make sure that your iOS or tvOS® is running on at least version 14.5 or later because these versions have enhancements for HomeKit control.

How do I troubleshoot when the mounting cradle is not sticking to the wall?

You may try the following options Make sure the wall is clean and dry. Rubbing alcohol cleans and dries fast. Other cleaners may take longer to dry. Make sure the protective film is removed from the tape strips. Make sure that the surface can accept a taped item on it. Rough surfaces such as stucco do not work well for adhesive tape items. The surface should be as flat as possible.

Wemo Stage WSC010 Frequently Asked Questions

PRODUCT INFORMATION

What is the Wemo Stage Smart Scene Controller, WSC010?
What are HomeKit Scenes?
How long is the warranty for the Wemo WSC010?
Does the Wemo WSC010 have a connected equipment warranty (CEW)?
Is it MFi-certified?
Is the Wemo WSC010 Apple HomeKit-certified?
Is the Wemo WSC010 Proposition 65-certified?
Is the Wemo WSC010 RoHS-certified?
What are the available colors of the Wemo WSC010?
What is included in the package with the Wemo WSC010?

HARDWARE INFORMATION

What wireless standard does the Wemo WSC010 use?
Does it support Near Field Communication (NFC)?
Is it rechargeable?
What type of battery does the Wemo WSC010 use?
How many buttons are on the Wemo WSC010?
What are the dimensions and weight of the Wemo WSC010?
Are there any status lights on the Wemo WSC010?
What are the operating and storage temperatures of the Wemo WSC010?
What type of faceplate does the Wemo WSC010 wall mount cradle use?
What type of adhesive is used to attach the Wemo WSC010 to the wall?

COMPATIBILITY

What equipment is required to use the Wemo WSC010?
. What can I control with the Wemo WSC010?
Does the Wemo WSC010 work with Amazon Alexa?
Does the Wemo WSC010 work with Google Home™?
Does the Wemo WSC010 work with Siri®?
Does the Wemo WSC010 work remotely?
Does the Wemo WSC010 work with the Wemo app?
Does the Wemo WSC010 work with Wemo accounts?
Can the Wemo WSC010 control non-Wemo devices?
Can the Wemo WSC010 be used with Android™ devices?
Can the Wemo WSC010 connect to my WiFi?
Can the Wemo WSC010 control my Wemo devices?
Does the Wemo WSC010 control Wemo Rules?

SETUP AND INSTALLATION

What is needed to set up the Wemo WSC010?
How do I install or replace the battery in the Wemo WSC010?
Where do I locate the HomeKit code for the Wemo WSC010?
How do I add the Wemo WSC010 to an Apple Home network?
How do I wall mount the Wemo WSC010?
How do I create a Scene in the Apple Home app?

FUNCTIONALITY

What is the range of the Wemo WSC010?
What do the status lights mean on the Wemo WSC010?
How many Scenes can the Wemo WSC010 be set to control?
How does the Wemo WSC010 control six Scenes with only three buttons?
How does the Wemo WSC010 connect to the wall mount cradle?
Does the Wemo WSC010 wall mount cradle require the faceplate before it can be used?
How do I upgrade the firmware of the Wemo WSC010?

TROUBLESHOOTING

How do I reboot the Wemo WSC010?
How do I factory restore the Wemo WSC010?
How do I troubleshoot general control issues of the Wemo WSC010?
How do I troubleshoot when the mounting cradle is not sticking to the wall?

PRODUCT INFORMATION

What is the Wemo Stage Smart Scene Controller, WSC010?
The Wemo Stage Smart Scene Controller, WSC010 is a Bluetooth®-powered HomeKit® remote that provides a physical way to control the HomeKit Scenes. With the ability to be used as a remote or attached to the wall like a light switch with its magnetic faceplate, the Wemo WSC010 provides a convenient way to control your HomeKit devices without using the Apple® Home app. To know more, click
here(https://www.belkin.com/us/support-article?articleNum=318294).
What are HomeKit Scenes?
In HomeKit, Scenes allow you to control multiple accessories at the same time. Using a Scene, it is possible to have multiple functions happen at once depending on the devices in the Scene. For example, you can create a night- time Scene which dims the lights in your rooms and turns ON your porch lights. You can also create a movie time Scene which dims the lights, turns ON your home theater equipment and your television. Scenes are created using the HomeKit app on your iOS or macOS® device.
How long is the warranty for the Wemo WSC010?
The Wemo WSC010 has a 3-year warranty.
Does the Wemo WSC010 have a connected equipment warranty (CEW)?
No.
Is it MFi-certified?
No.
Is the Wemo WSC010 Apple HomeKit-certified?
Yes.
Is the Wemo WSC010 Proposition 65-certified?
Yes.
Is the Wemo WSC010 RoHS-certified?
Yes.
What are the available colors of the Wemo WSC010?
It is available in white – WSC010.
What is included in the package with the Wemo WSC010?
Below are included in the package:
- Wemo WSC010
- Magnetic wall mount with faceplate A CR2032 coin cell battery
- Quick start guide
- Regulatory information

HARDWARE INFORMATION

What wireless standard does the Wemo WSC010 use?
The Wemo WSC010 supports Bluetooth 5.0 Low Energy (BLE 5.0).
Does it support Near Field Communication (NFC)?
Yes. It supports NFC for setup.
Is it rechargeable?
No. The Wemo WSC010 uses a non-rechargeable, user replaceable battery.
What type of battery does the Wemo WSC010 use?
It uses a CR2032 coin cell battery.
How many buttons are on the Wemo WSC010?
It has three physical buttons.
What are the dimensions and weight of the Wemo WSC010?
Below are the dimensions of Wemo WSC010.
Remote
- Height – 6.64 cm
- Length – 3.28 cm
- Width – 0.9 cm
  Cradle
- Height – 10.5 cm
- Width – 4.4 cm
  Faceplate
- Height – 12.8 cm
- Width – 8.4 cm
  The weight of the Wemo WSC010 is 0.17 lb.
Are there any status lights on the Wemo WSC010?
Yes. There is a dual-color status light.
What are the operating and storage temperatures of the Wemo WSC010?
Operating temperatures
- 0°C to 40°C
- 10% to 80% humidity
  Storage temperatures
- -40°C to 60°C
- 5% to 90% humidity
What type of faceplate does the Wemo WSC010 wall mount cradle use?
The wall mount cradle of the Wemo WSC010 uses a standard size Decora faceplate. The faceplate is designed to snap on to the cradle. If you are using a third-party faceplate, you will need to use screws to attach it.
What type of adhesive is used to attach the Wemo WSC010 to the wall?
The cradle comes with a pre-installed 3M double-sided tape.

COMPATIBILITY

What equipment is required to use the Wemo WSC010?
The Wemo WSC010 requires an Apple home hub to control devices on your HomeKit network. Click here(https://support.apple.com/en-us/HT207057) to visit the Apple support website for more information on home hubs.
What can I control with the Wemo WSC010?
The Wemo WSC010 is designed to activate Apple Home Scenes, individual devices and groups of devices.
Does the Wemo WSC010 work with Amazon Alexa?
No.
Does the Wemo WSC010 work with Google Home™?
No
Does the Wemo WSC010 work with Siri®?
No .
Does the Wemo WSC010 work remotely?
No. It is designed to work on your local network by connecting to a home hub device.
Does the Wemo WSC010 work with the Wemo app?
No.
Does the Wemo WSC010 work with Wemo accounts?
No.
Can the Wemo WSC010 control non-Wemo devices?
Yes. The Wemo WSC010 activates Apple Home Scenes which control your HomeKit-enabled devices.
Can the Wemo WSC010 be used with Android™ devices?
No. The Wemo WSC010 requires the Apple Home app for setup. The Apple Home app is only available on iOS and macOS devices.
Can the Wemo WSC010 connect to my WiFi?
No.
Can the Wemo WSC010 control my Wemo devices?
The Wemo WSC010 can control HomeKit-enabled Wemo devices that are part of an Apple Home and part of a Scene.
Does the Wemo WSC010 control Wemo Rules?
No.

SETUP AND INSTALLATION

What is needed to set up the Wemo WSC010?
The Wemo WSC010 needs the following to set up:
A Wemo WSC010
HomeKit-compatible smart devices and accessories
A home hub running the latest software
How do I install or replace the battery in the Wemo WSC010?
To know how to install or replace the battery, click here(https://www.belkin.com/us/support-article?articleNum=318299).
Where do I locate the HomeKit code for the Wemo WSC010?
The HomeKit code can be found on the following:
- On the quick start guide
- At the back of the Wemo WSC010
  NOTE: You will first need to remove the battery cover to view the code at the back of the Wemo WSC010. To know more, click here(https://www.belkin.com/us /support-article?articleNum=318298).
How do I add the Wemo WSC010 to an Apple Home network?
To know how to add, click here(https://www.belkin.com/us/support- article?articleNum=318307).
How do I wall mount the Wemo WSC010?
To know how to wall mount, click here(https://www.belkin.com/us/support- article?articleNum=318308).
How do I create a Scene in the Apple Home app?
To know how to create a Scene, click here(https://www.belkin.com/us/support- article?articleNum=318309).

FUNCTIONALITY

What is the range of the Wemo WSC010?}
The Wemo WSC010 has a range of up to 30 ft.
What do the status lights mean on the Wemo WSC010?
To know the light behavior of the Wemo WSC010, click here(https://www.belkin.com/us/support-article?articleNum=318295).
How many Scenes can the Wemo WSC010 be set to control?
The Wemo WSC010 can be set to control up to six Scenes. To know how to assign Scenes, click
here(https://www.belkin.com/us/support-article?articleNum=318301).
How does the Wemo WSC010 control six Scenes with only three buttons?
The buttons on the Wemo WSC010 have two press behaviors for controlling different Scenes. To know more how to control Scenes with your Wemo WSC010, click here(https://www.belkin.com/us/support-article?articleNum=318302).
How does the Wemo WSC010 connect to the wall mount cradle?
It uses magnets.
Does the Wemo WSC010 wall mount cradle require the faceplate before it can be used?
No. The faceplate is purely cosmetic.
How do I upgrade the firmware of the Wemo WSC010?
When an update is available, you will see a notification in the Home app. To know more, click
here(https://www.belkin.com/us/support-article?articleNum=318347).

TROUBLESHOOTING

How do I reboot the Wemo WSC010?
To know how to reboot your Wemo WSC010, click here(https://www.belkin.com/us /support-article?articleNum=318303).
How do I factory restore the Wemo WSC010?
Restoring the Wemo WSC010 will erase all settings and place it back into a default factory state. To know how to factory restore the Wemo WSC010, click here(https://www.belkin.com/us/support-article?articleNum=318304).
How do I troubleshoot general control issues of the Wemo WSC010?
- Below are the basic troubleshooting steps for control issues:
- Make sure that your home hub is using the latest software.
- Make sure that your iOS or tvOS® is running on at least version 14.5 or later because these versions have enhancements for HomeKit control.
How do I troubleshoot when the mounting cradle is not sticking to the wall?
You may try the following options
- Make sure the wall is clean and dry. Rubbing alcohol cleans and dries fast. Other cleaners may take longer to dry.
- Make sure the protective film is removed from the tape strips.
- Make sure that the surface can accept a taped item on it. Rough surfaces such as stucco do not work well for adhesive tape items.
- The surface should be as flat as possible.