WHITE KNIGHT PEM050 Electronic Metering Pumps Instructions
- June 16, 2024
- WHITE KNIGHT
Table of Contents
WHITE KNIGHT PEM050 Electronic Metering Pumps
Configuration
Instructions
Options 0-4 are required. Options 5-11 are not required.
To define fittings at different ports, see section 7-11 Contact support for
revision or copy exact information
Standard options are highlighted
0. Model
50-ml electronic metering pump| PEM050
1. Ports
Two ports| 02
Three ports| 03
Four ports| 04
Five ports| 05
Six ports| 06
2. Motor Location
Motor on bottom| B
Motor on top| T
3. Fittings
* Selected fitting is for all ports unless different fittings are defined.
(See 7-11).
Flaretek Compatible
| 1/4 in.| 1AF04
3/8 in.| 1AF06
Pillar S-300
| 1/8 in.| 1AP02
1/4 in.| 1AP04
3/8 in.| 1AP06
FNPT| 1/4 in.| 1AN04
3/8 in.| 1AN06
Primelock| 3/8 in.| 1AL06
4. Connection & Cables
Wire leads with 5-m (15-ft) ETFE-coated cable| E1
Wire leads with 5-m (15-ft) FEP-encapsulated cable| E2
Two 5-pin M12 Turck connectors, cable not included| E3
Two 5-pin M12 Turck connectors with 6-m (18-ft) cable| E4
- Options E1/E2 connections are inside the pump casing.
Options E3/E4 connectors are available outside of pump casing. - Options with cables include power and communication cables.
- Turck connectors provide power and communication.
5. Communication Protocol
Serial over RS-422| Blank
Ethernet RJ45| H1
Ethernet RJ45,
(communication cord cut to 2-m (6-ft))| H2
Serial over RS-232| H3
- Cables match selected Connection & Cable options.
6. Leak Detection
No Leak detection| Blank
15 ft. fiber optic cable, no amplifier| LF0
15 ft. fiber optic cable, with D10 amplifier| LF1
25 ft. fiber optic cable, no amplifier| LF2
25 ft. fiber optic cable, with D10 amplifier| LF3
15 ft. conductivity cable| LC0
25 ft. conductivity cable| LC1
Example Configurations
PEM050-04B1AF04-E3 | All four fittings are F04. |
---|---|
PEM050-04B1AF04-E3-2P6 | Fitting 1 is F04. Fittings 2-4 are P6. |
PEM050-04B1AF04-E3-2P6-3F4 | Fittings 1, 3, and 4 are F04/F4. Fitting 2 |
is P6.
PEM050-06B1AF04-E3-3P6-5F6| Fittings 1-2 are F04/F4. Fitting 3-4 are P6.
Fittings 5-6 are F6.
7-11. Different Fittings
Specify different port fittings with Port Location label (e.g. 2) and Fitting label (e.g. F4). Repeat both labels for fittings that differ from the previous specified option. Unspecified port fitting options use the last specified option.
Port Locations
* Port location depends on motor location. See Fig. 1 and Fig. 2 for port numbers.
Motor (B)
Fig. 1| Motor (T)
Fig. 2| Port Label
Top left| Bottom right| 2
Center right| Center left| 3
Center left| Center right| 4
Bottom right| Top left| 5
Bottom left| Top right| 6
Fittings | Label |
---|---|
Flaretek Compatible | 1/4 in. |
3/8 in. | F6 |
Pillar S-300 | 1/8 in. |
1/4 in. | P4 |
3/8 in. | P6 |
FNPT | 1/4 in. |
3/8 in. | N6 |
Primelock | 3/8 in. |
Customer Support
Copyright © 2022 White Knight Fluid Handling | A Graco company
P : 435.783.6040 | F : 435.783.6128 |
info@wkfluidhandling.com
11 Nov 2022 | Subject to change without notice
https://wkfluidhandling.com/ordering-instructions/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>