Robobloq Q1 Feelin Smart DIY Ambient Light User Manual
- June 10, 2024
- Robobloq
Table of Contents
Q1 Feelin Smart DIY Ambient Light
User Manual
Robobloq Official Website: https://qverse.robobloq.com
After-sales service line: +86 0755-26926929
Manufacturer: Shenzhen Robobloq Co., Ltd.
Room 2301-2302, Building 6, Shenzhen International Innovation Valley, Dashi
1st Road,
Xili Sub-district, Nanshan District, Shenzhen, Guangdong, China
Instructions for Use
01. Power Connection
To power on the device, use the supplied Type-C power cable to connect to a power adapter of 5V 2A or above that meets CE and other certification standards. Using an unqualified adapter or power bank with low battery may affect the light effect or the operating stability of the intelligent radar- To avoid damage to the device or the adapter, do not use an adapter or a USB port with a current of less than 2A
- Do not use in a humid environment
02. Description of functions
Product features
Safety Warnings
- Before use, please check that the voltage and current meet the operating voltage and current requirements of the product. Improper voltage and current may damage the product and cause safety hazards;
- Do not dismantle the product yourself;
- The product generates heat during operation. Please do not use for a prolonged period in a dosed environment, and ensure sufficient ventilation around the product for cooling;
- Please use the product in an environment with a temperature of 0-40
Troubleshooting
| Name | Problem |
|---|
Feelin light
Q1| The product does not emit light when powered on
The light flashes abnormally
The light colors are missing
The light effect cannot be switched by the NK card
The app cannot connect to thedevice under normal network conditions
Damage to product structure (non-human damage) results in abnormalities in use
or safety performance
Name and Concentration of Hazardous Substances in the Product
| Part name | Hazardous substance |
|---|---|
| Lead (Pb) | Merary (Hg) |
| (Cd) | Hezavalent cromiurn (Cr (VI)) |
Polybrominated
chrenyl ethers
(PBDE)
Housing| 0| 0| 0| 0| 0| 0
PCBA| X| 0| 0| 0| 0| 0
Power cable| 0| 0| 0| 0| 0| 0
This table was compiled in accordance with ROHS provisions.
0: Indicates that the concentration of the hazardous substance in all
homogeneous materials of the part is below The limit soecified in ROHS.
x : Indicates that the concentration of the hazardous substance in at least
one homogeneous material of the part is above the limit specified in ROHS.
Note:
- On/Off button: used to turn on or turn off the device
- Light effect switch button, short press for light effect switch of three kinds of equipment, long press for light brightness adjustment
- The intelligent contactless infrared light brightness adjuster is used for contactless light effect intelligent brightness adjustment by hovering at 3-6CM above the adjuster. Manual quick sweeping can be used for quick switch on and off operation. This device is closed by default and can be opened on the APP device setting page
- Light effect card intelligent sensing and recognition area: used to recognize the supplied light effect cards. the setting of which can be changed on the app interface
- Intelligent radar: used for intelligent sensing and detection of human movement
- Intelligent light sensor: used for intelligently automatic adjustment of light brightness
- Buzzer: used to provide audio feedback for operations such as touch/light effect switching
- Power input interface
- Intelligent high-sensitivity sound pickup module: used to pick up the rhythm of sound in the environment to realize rhythmic lighting in response to the music
App Connection
Scan the QR cade below to download and install the app. Users who have installed the app will be directly transferred to the device connection page. Alternatively, search for Qverse in the App Store, then download and install the app. Open the app home page, click “+” in the upper right corner of the page, and add devices as prompted by the app.* Please make sure the Wi-Fi network is available and can access the Internet normally (this product does not support 5G network).
https://qverse.robobloq.com/download
Note: due to the upgrade and update of the app, the actual operation may vary from the above descriptions. Please follow the current instructions in the
04. Factory Reset
When the device is connected to a power supply and turned off, press and hold
the light effect mode switch of the device for 3 s, thena red breathe light
effect will be displayed on the device, and 5 s later, the device will
automatically restart and show a white light, which indicates the device has
been restored to the factory settings.
Basic parameters
Model
Number of lamp beads
Type of lamp beads
Power interface
Rated power
Total weight
Dimensions
Service life
Rated input| RB-00015
96
RGB
Type-C
10W
1160g
19871325mm
Approx. 20,000 h
5V2A
---|---
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna
About Robobloq
Headquartered in Shenzhen, China, Roboblog is a state-level high-tech company
engaged in the research and development of AIOT technological consumer
products and artificial intelligence aimed at the global market. With Al as
the core technology, user experience as the benchmark, and driven by
innovation, Roboblog is focused on creating the ultimate product power and an
interconnected Al intelligent consumption ecosystem to let more people enjoy
the beauty of life, with the goal of becoming a global leader in aesthetic
consumer goods with innovative technology. It has many brands and product
lines including “Q-scout”, “Qobo’, “ROBOBLOQ’, and “Qverse”.
The products are currently sold in more than 50 countries and regions
domestically and abroad, receiving recognition and support from hundreds of
thousands of users.
Roboblog strives to be a respected high-tech company.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>