INNOVA CELULAR BRAZ7HARRY Smart Band Fitness Flood User Manual
- June 12, 2024
- Innova Celular
Table of Contents
INNOVA CELULAR BRAZ7HARRY Smart Band Fitness Flood
Recommendations for people with sensitive skin during use of electronic wrist devices, Smartwatch and Smartband.
The materials used for our INNOVA Smartwatches and Smartbands are selected following a rigorous control of hypoallergenic measures, as well as guaranteeing that all materials comply with current regulations for materials in contact with the skin. A small number of people, however, may experience some type of skin reaction.
If you suspect, or know, that you are allergic or have an above average sensitive skin type, you should monitor the use of these devices for any type of reaction due to said allergies, environmental factors or prolonged exposure to irritants, like soap, sweat, or other causes. Smartwatches and Smartbands may contain materials such as nickel and acrylates which, even though they are within the permitted amounts in the manufacturing process, may cause skin to react if you are sensitive to them. If you use these devices for a prolonged period of time, you may be more susceptible to developing skin sensitivities. To avoid possible skin irritations we recommend you do not expose the device to chemicals or use it if your skin has, or has been recently applied with, any of the products listed below:
- Insect repellents
- Moisturizing creams and lotions
- Oils
- Perfumes
- Antiseptic gels
- Soaps
- Sun protection creams
It is recommended that the devices are used when the skin is completely dry and free of any of the aforementioned products to avoid having charging contacts and measurement sensors in contact with wet skin. They are not submersible or waterproof.
Clean the device thoroughly to remove sweat after training and allow it to dry. Prolonged exposure to moisture can cause skin irritation. It is also advisable not to wear these devices too tight or too loose. If the strap is too tight, it may cause skin irritation. If the strap is too loose, chafing may occur. The watch strap should be left so that it can move slightly back and forth on the wrist. If you wear the device for prolonged periods of time, remove it to give your skin a rest. To avoid irritation, swap the device to your other wrist. If you notice redness, swelling, itching or any other irritation, remove the Smartwatch immediately and consult your physician before using the device again.
Special attention must be paid to the use of these devices in places with relatively low humidity conditions.
When using the Smartwatch/Smartband in places with low relative humidity (dry/poorly ventilated places, low humidity atmospheric conditions, dry indoors, if heating or air conditioning is always on, etc.), as with any other electronic device, it may be affected by charges of static electricity on rare but certain occasions. This may cause damage to the device and also to the person wearing it at that time. Static electricity is everywhere. It surrounds us without us perceiving it.
An effective trick to avoid a high percentage of static electricity at home:
- Use a humidifier. Humidity is a good conductor of electricity therefore, by maintaining an acceptable percentage of it, we will avoid static in areas of the home where we metal objects may be found. Small containers of water on top of radiators is another alternative solution.
- The use of the devices in bed, whilst sleeping, is especially discouraged for children and the elderly due to the fact that repeated movements during the night may cause, through friction with sheets, blankets, etc. a charge of static electricity. This may result in a sudden discharge of the watch’s battery and/or heating of same as the human body is a conductive element and can cause a reaction to people with sensitive skin, redness, irritation, etc.
- If you notice redness, swelling, itching, or any other form of irritation, remove the Smartwatch immediately and consult your physician before using the device again in case you are suffering from any type of reaction, allergic or otherwise.
Thank you for using our smart band INNOVA.
Important! The data provided by the smart band, such as heart rate, blood
oxygen and blood pressure, are merely indicative, it is not an exact medical
measuring device. Even if you are well, go to all the appointments scheduled
by your doctor. Before using the device please read this instruction manual in
its entirety.
Wearing
Place the bracelet on your wrist, and adjust the strap for a comfortable wear,
ensuring the sensor is in contact with your skin. If the sensor is not in
contact with your skin, the measurements will not be accurate.
Charging
Before using the device for the first time, please ensure the battery is
charged. If the device does not turn on, please connect it to the battery
charger for it to activate.
Pairing device to phone
IMPORTANT! Please do not pair your device directly to your phone’s Bluetooth. If you have already done this, please remove it from “paired devices” as it will prevent its connection to the application.
-
Download the application Smart Bracelet INNOVA S-BANDS from Google Play Store / Apple Store or, alternatively, scan the following QR Code and install it.
-
Open the application and grant all access requests.
-
To finish pairing, press the “Set” icon and then press “Bind devices to…” banner (highlighted). You will then find “BRAZ-7HARRY” which, once selected, will pair to your phone.
The watch should now show local date and time and the top of the application should appear as follows: From “Message Push” you can set up the APPS from which you wish to receive information on your device (Calls, WhatsApp, Facebook, Twitter, etc.). Restarting and/or removing the device will cause data to be deleted. -
In the “Step” icon you can view your daily steps and your set objectives/targets. Further below, you can also view a summary of the distance walked as well as other information such as your heart rate and/or sleeping patterns. If you press on the information displayed, another screen will open, and you can start measuring your heart rate or see the details of your sleeping habits. At the bottom you will find “Healthy habit” in which you can specify “eat breakfast”, “go to bed early”, etc.
-
Within “Motion” you will find different options such as “walk”, “run” or “bike”. Pressing “Start” and having your GPS activated, you can see the distances achieved as well as the route. To stop swipe the lower bar to the right and press “End”.
**To see the route, press the gear icon.
**
- Press “Mine” to view details of different data, a summary of your activities and, in “User Profile”, establish your personal information (sex, age, height, etc.).
Note : Data provided by this device, such as heart rate, blood oxygen and blood pressure are merely an indication. This is not a medical measuring device. Please adhere to your doctor’s appointments
Bracelet functions
- When the device is turned off, touch and hold the function button for more than 3 seconds to turn it on.
- In the MAC address screen of the bracelet, press and hold for 2 seconds to turn it off. Short press will exit the shutdown screen.
- Bracelet reset. This function will clear all data from the bracelet (such as step count).
- In the power-on state, short press the lower part of the screen to illuminate it.
- On the main screen of the bracelet, briefly press the lower part of the screen to change options.
- To enter an option and select the desired function, press and hold the lower part of the screen for 3 seconds.
Watch interface
After synchronizing with the phone, the bracelet will automatically calibrate
the time. Press, and hold the lower part of the screen for 2 seconds, to
change the time between 12/24 hour format.
Track steps / Number of steps
Use the bracelet to record the number of daily steps and view real-time steps.
Distance
The distance is estimated based on the number of steps taken.
Calories
The estimate of the calories burnt is based on the number of steps. Heart
rate, blood pressure, blood oxygen three-in-oneAfter entering the heart rate
three-in-one test screen for a few seconds, the current heart rate, blood
pressure and blood oxygen test results are displayed. Multi-sport mode: Select
the desired sport to start recording your activity
Steps/time mode
Calculate counting time from 0. You can check the time, record burnt calories
and duration of exercise. After exiting this interface, the steps will be
added to the total number of steps in the bracelet.
Sleep mode
When you fall asleep, the bracelet will automatically enter the sleep
monitoring mode. It automatically detects your deep/shallow sleep as well as
wake up during the night and calculates your sleep quality. Sleep data is only
for APP viewing.
Note : Wearing the bracelet to sleep will have sleep data and starts to
detect sleep at 10 p.m. Sleeping 3/4 hours will synchronize data to the APP
whilst sleeping.
Weather
After synchronizing with app, you can view the current weather conditions.
Music control
The bracelet can control the previous song and the next song, and pause /
start playback (Note: to use this function, you need to keep the bracelet
connected to the app, and turn on the music player first)
Information mode
When the bracelet pushes multiple reminder messages, enter this interface to
view the last 3 message records.
APP FUNCTION AND SETTINGS
Personal Information
Please set your personal information after entering the APP. Settings ->
Personal information; set gender, age, height, weight. You can also set you
daily step goals to monitor daily completion.
Application push messages Incoming calls
When connected (if the call alert function is enabled) and a call comes in,
the wristband will vibrate and display the name or number of the caller. APP
must have permission to read address book.
SMS notification
When connected (if the SMS reminder function is enabled), the bracelet will
vibrate when a text message arrives.
Theme settings
Users can change cloud themes through this function.
Other reminders
When connected (if this function is enabled) and a message arrives from
WhatsApp, Facebook, etc. the bracelet will vibrate and display the content
received by the APP. You can view the last three message records. APP Must
have permission to receive system notifications. The wristband can display
20-40 words.
Other functions
Turn on vibration to set this function: When there is a call, message, or
other reminders, the bracelet will vibrate. If it is off, the bracelet will
display a screen reminder without vibrating.
Tips for Android users
When using the reminder function you need to set it to allow “INNOVA S-BANDS”
to run in the background. It is recommended to add “INNOVA S-BANDS” to the
rights management and open all permissions.
Alarm setting
When connected, 8 alarms can be set. After setting them, they will be
synchronized to the bracelet. Once synchronization is successful, even if the
APP is not connected, the bracelet will display the alarm.
Finding the bracelet
When connected, click the “search bracelet” option and the bracelet will
vibrate.
Photography
When connected, start the photo from the wristband or the APP to enter the
camera interface. Shake/turn the wrist/touch the bracelet, and it will
automatically take a photo after 3 seconds. Please allow AP Access to the
photo album to save photos.
Sedentary reminder
Set whether to enable the sedentary reminder function. You can set a reminder
interval. If you sit for an extended period during the set time the bracelet
will notify you.
Turn wrist to activate
Turn this function on. When the wristband is in standby mode, lift your wrist
and turn the screen towards you to activate the screen.
Do not disturb
Turn on the Do Not Disturb mode. You can set a do not disturb time period.
During this time period, the bracelet stops receiving notification messages
and reminders.
Device reset
This feature will erase all data in the bracelet.
Remove device
Removing the device will erase all data.
Parameters
- Equipment type: Smart wristband
- Type of battery: Lithium polymer
- Vibration motor: Support
- Synchronization method: Bluetooth 4.2
- Operating temperature: -10ºC~50ºC
- Sensor: Low power accelerometer
- System requirements: iOS 9.0 or above/ Android 5.0 or above
Precautions
- Please connect the bracelet when synchronizing data
- Use the included charging cable to charge.
- Do not expose the bracelet to high moisture, high temperature, or very low temperatures for long periods of time.
- The bracelet appears to crash and restart. Please check phone memory, clean and try again. Alternatively exit the APP and reopen it.
Note : Do not expose the Smart Band at extreme temperatures, these could exploit.
Features
- Color screen / Measurement of steps / Control of calories burned / Measurement of distance traveled / Different sports / Sleep monitor / Notifications of calls, messages, Whatsapp, RRSS… / Phone search / Alarms / Remote camera / Sedentary reminder / BT 4.2 / Weather / Resistant to splashes of water (NOT SUBMERSIBLE) / Music control / 90 mAh battery / BT frequency band: 2.4 Ghz / Maximum RF power emitted < 100 mW
Declaration of conformity
Through this INNOVA CELULAR declares that the BRAZALETE DEPORTIVO CON HEART
RATE HARRY POTTER (BRAZ/7HARRY) complies with the essential requirements and
any other applicable or enforceable provisions of Directives 2014/30/EU,
2014/53/EU and RoHS 2011/65/EU + 2015/863.
To see the complete declaration of conformity you can access through the following link: http://www.innovacelular.com/images/web/descargas/descargas/declaracion/declaracion_braz7harry.pdf
Customer service
Only in English, Spanish and Portuguese
Working hours : Mon to Thu from 08:00 to 14:00 and from 15:30 to 17:30
and Fri. from 09:00 to 14:00
sac@innovacelular.com
Guarantee
- DEVICE
- ITEM: ___
- Serial number: ____
- ESTABLISHMENT
- Purchase date: ___
NOTE : The BRAZALETE DEPORTIVO CON HEART RATE HARRY POTTER (BRAZ/7HARRY) It has a 3-year warranty from the date of purchase. Special importance in the durability of the products have the elements that compose it and that suffer from degradation and loss of capacities due to their use, being understood as normal wear that they lose capacity, especially in the case of rechargeable batteries, depending largely on infinity of external factors (hours of use, charge and discharge cycles, use of inappropriate chargers, temperatures of use, not respecting the recommended charging times, etc…)
For the guarantee of wear and tear parts, it must be taken into account that the loss of autonomy of the battery as a result of its aging does not imply a manufacturing defect, so it is considered normal that after 6 months have a loss of 10%, at 15 months 20% – 30% at 24 months 45%, all corresponding to proper use of the battery and the charge and discharge cycles carried out. Any battery that presents symptoms other than those listed in this manual, will be inspected by the technical service and assessed for its affectation to guarantee. If after 24 months from its purchase the battery presents symptoms different from those detailed, it will be understood to be exempt from guarantee for the reasons stated above and will be left out of the inspection process, becoming the customer who, if they so wish, must reliably demonstrate that the battery presented defects other than those detailed in this manual before those 24 months.
Safety and handling: For more information on safety and handling, see the User Manual.
- Important Safety Information : Handle the Smart Band with care. They contain sensitive electronic components, including batteries, and may malfunction, affect performance, or cause damage if dropped, burned, punctured, crushed, disassembled, or exposed to excessive heat, liquid, or high-pressure environments. concentrations of industrial chemicals, including nearly evaporated liquefied gases such as helium. Do not use the Smart Band if it is damaged.
- Batteries : Do not try to replace the battery of the Smart Band by yourself, as you could damage the Smart Band and cause overheating and injury.
- Charge : Charge the Smart Band with the charging cable and a power adapter or a computer, charge the device only with an adapter that meets relevant national, international and regional safety standards. Other adapters may not meet applicable safety standards and their use to charge the Smart Band may present the risk of injury or death. Using damaged cables or chargers, or charging the device if they are wet, may cause fire, electric shock, injury, or damage to the case or other belongings.
- Prolonged exposure to heat: Avoid prolonged skin contact with the device, power adapter, charging cable and its connector, or the wireless charger when connected to a power source, as this may cause discomfort or injury.
- Choking hazard: The Smart Watch and the small parts included may present a choking hazard to small children or cause other injuries. Always keep them out of the reach of children.
- Interference with medical devices: The Smart Band and charger contain components and radios that emit electromagnetic fields. These electromagnetic fields and magnets that the device may contain may interfere with the operation of pacemakers, defibrillators, or other medical devices. Keep a safe distance between the medical device and the Smart Band. Request specific information about the medical device from the manufacturer and your doctor. Stop using the Smart Band if you suspect it is interfering with your pacemaker, defibrillator, or other medical device.
- Skin irritations: The Smart Band can cause skin irritation if not cleaned properly. Regularly clean the Smart Band with a soft, lint-free cloth. In the event of any type of skin reaction, stop using the Smart Band. If the problem persists, see your doctor.
- Electrostatic dischargess: When using the Smart Band in areas where the air is very dry, it is easy to accumulate static electricity, so you may feel a small electrostatic discharge from the Smart Band on your wrist. To minimize this risk, avoid using the Smart Band in extremely dry environments, or touch a grounded, unpainted metal object before putting on the Smart Band.
- Important Driving Information: Discoloration of the connector and the bottom of the Smart Band after continued use is considered normal. Dirt, debris, and exposure to moisture could cause discoloration.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>