JMS audio WS11 Wearable Bluetooth Speaker User Manual

June 1, 2024
JMS audio

JMS audio WS11 Wearable Bluetooth Speaker User Manual

JMS audio WS11 Wearable Bluetooth Speaker.jpg

Enjoy Music Anytime, Anywhere

Introduction:

Thanks for choosing our wearable Bluetooth speaker WS11. This is a multifunctional Bluetooth speaker with professional-quality for music playing. If you want to have a better experience, please read this instruction carefully.

Important:
Your speaker is shipped from the factory in a deep sleep mode to conserve battery. Activate your speaker by connecting the USB cable to a power source before first use.

What’s in the Box:

  • User Manual x 1
  • USB-Charging Cable x 1

Specifications:

  • Waterproof Level: IPX5
  • Bluetooth Version: 5.3
  • Chipset: AC6956C4
  • Bluetooth Profile: A2DP, AVRCP, HFP
  • Audio Format: SBC
  • Speaker: 2W
  • Battery Type: Lithium battery
  • Battery Capacity: 3.7V/600mAh
  • Battery Life: Up to 5 hours(under max volume)
  • Charging Time: 2H
  • Product Size: 73x42x28mm
  • Product Weight: 64g

Features:

  • Travel and outdoor friendly: small enough to fit in your pocket;
  • Slim and compact size, easy to carry;
  • Attachable to your shirt, backpack or jacket via spring clamp or magnetic clip;
  • Crystal clear phone calls with active noise suppression;
  • Up to 5 hours of battery life;
  • Dust-proof and waterproof materials;
  • Delicate mesh design better prevents dust from entering.

Precautions:

Please read all the safety instruction warnings carefully before using this product. Improper use of this product may result in damage to it or attached products.

To ensure the product works well, please DO NOT use this in the following conditions:

  • Moisture or underwater;
  • Near heater or high-temperature areas;
  • Under direct and strong sunshine;
  • Please note that unauthorized dismantle is prohibited as this will nullify

Appearance:

FIG 1 Appearance.JPG

  1. Power button
  2. Volume up/ Previous song
  3. Volume down/ Next song
  4. Fabric mesh
  5. Magnetic clip
  6. Spring clamp
  7. Charging port
  8.  Microphone

Operation Instructions:

FIG 2 Operation Instructions.JPG

Bluetooth Function:

For first-time paring, you need to activate the Bluetooth function of you mobile phone, then search for a new device. Connect “WS-11” when the mobile phone What’s in the Box: detects the unit.

FCC STATEMENT:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

CORRECT DISPOSAL OF THIS PRODUCT

(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FIG 4 Operation Instructions.JPG

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals