TOOLCRAFT 2984291 Soldering Helping Hands Instruction Manual
- June 16, 2024
- Toolcraft
Table of Contents
Operating Instructions
Soldering Helping Hands
Item no: 2984291
Operating instructions
http://www.conrad.com/downloads
Download the latest operating instructions from www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Intended use
The product is used to hold circuit boards or other small objects steady while
soldering.
There is a weighted base with alligator clips and a small clamp used to secure
objects for hands-free soldering.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product
may be dam- aged.
Improper use can result in other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the
product.
Read the operating instructions carefully and store them in a safe place. Make
this product available to third parties only together with the operating
instructions.
All company names and product names are trademarks of their respective owners.
All rights reserved.
Delivery contents
■ Base
■ 5x flexible arms with clips
■ Clamp| ■ Clamp stand
■ Operating instructions
---|---
Description of symbols
**** The symbol warns of hazards that can lead to personal injury.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
5.2 Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
5.3 Operating environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, steam, and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
5.4 Operation
- Consult an expert when in doubt about the operation, safety or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
Product overview
1 Clamp stand
3 Insulated clips| 2 Clamp
3 Base
---|---
Installation
- Insert each post into the slot on the base.
- Tighten each post by rotating it clockwise.
Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical
solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
- Clean the product with a dry, fibre-free cloth.
Technical data
Product dimensions (W x H x D) …. 210 x 265 x 135 mm
Weight …………………………………….. 0.62 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2984291_V1_1023_dh_mh_en 1044972171-2 I1/O1 en