FORTE LXNS962 Luano Revolving Door Wardrobe Instruction Manual
- June 16, 2024
- FORTE
Table of Contents
**Assembling instruction
LXNS962
**
LXNS962 Luano Revolving Door Wardrobe
Follow the manufacturer’s assembly instructions, otherwise danger may occur 2022-12-19
Furniture containing wood-based panels (particle board, fibreboard, plywood etc.) may emit into indoor air inconsiderable amounts of substances used in the production processes. The level of this emission is examined and it meets the applicable standards. Afterassembling the furniture, it is advised to regularly ventilate the room where the furniture stands, which should last about four weeks or until the smell is eliminated.
Service
The article is not attached to the
furniture
IZLED11ST48
Before suspending or fixing furniture to the wall (in order to prevent falling
over), check the type and strength of the wall. Select wall plugs and screws
appropriate for the given type of the wall.In the case of doubts, contact a
specialist. Theinstallation must be performed by a competentperson. WARNING!!!
If the rawlplugs with screwsare attached to the product, then they areintended
only for walls made of solid andhomogeneous materials.
To prevent the piece of furniture from falling over, please attach it
permanently to the wall
GUIDELINES FOR FURNITURE CARE
Please follow the below specified remarks in order toproperly take care of
your furniture:
A clean dry soft fabric must be used for cleaning. If thefurniture requires
thorough cleaning, then you canslightly moistened it with water or cleaning
agentdesigned for furniture cleaning, and subsequently the cleaned elements
must be wiped until they’re dry.Metal and glass parts must be cleaned
usingcommercially available cleaning agents designed forcleaning of this type
of materials, in accordance withthe included instructions.
Do not use corrosive agents, scouring agents andother agents if their intended
use is unknown.
The cleaning agents must have clear marking that they are intended for
cleaning furniture.
WARNING!!! High gloss elements, from which theprotective foil was
removed, may be cleaned and usedonly after 72 hours.