EASEHOLD XZJ-002 Portable Smoothie Blender User Manual

EASEHOLD XZJ-002 Portable Smoothie Blender User Manual

Warning

This product is for household use only. Any commercial use is prohibited.

The following are prohibited.

• No-load or over-load use.
• DO NOT blend dry and hard foods or Chinese herbals.
• DO NOT add carbonated beverages or water.
• DO NOT open the lid when the blender is functioning.
• DO NOT use the blender on an unstable surface.
• DO NOT add food that exceeds 60°C.
• DO NOT place the blender in environments of strong magnetism, high temperatures over 60°C, or with flammable and explosive gas.
• DO NOT place the blender next to a working stove or oven.
• DO NOT throw the blender into fire, or water.
• DO NOT leave the product working alone.
• DO NOT use the blender when the parts of it are not well-jointed.
• DO NOT arbitrarily disassemble, squeeze, or puncture the blender.
• DO NOT let children use the blender alone, and please keep the blender away from infants. Aged people should use the blender according to the manual or with others’ help.
• DO NOT use the blender when the plug or other components are broken. Please contact our support team for help – support@easehold.com

The following conditions may cause injuries or losses.

Please pay attention.

• The single operation time is 40 seconds per blending. Please pause for 10 minutes after 3 operations continuously to cool the motor.
• Be careful when cleaning or removing the blades.
• Always disconnect the blender from the power supply if it is left unattended and before assembling, disassembling, or cleaning.
• Switch off the blender and disconnect it from the supply before changing the separate components.
• Children shall not play with the blender.
• Be careful if hot liquid is poured into the blender, as it may be ejected due to a sudden steaming.
• Anyone who uses the blender should know the blender and understand the may-happen hazards. Especially those with reduced physical, sensory, or mental capabilities or lack of experience and knowledge should have been given supervision instruction concerning the use of the blender in a safe way.
• Ensure the working power of the product is conform to your house’s electricity standards to avoid incidents that may happen.
• Clean the mixing cup after use, as residues may deteriorate and emit a nasty odor with long-time storage.
• Keep the product away from other home or kitchen appliances over 30 cm away.
• Cover the charging port with the seal after charging to protect the port against water.
• The built-in overheating protection device will automatically turn on when the

product is misworking or overworking. You can restart it in 30 minutes. If not, please contact our support team for help – support@easehold.com. Do not dismantle the product on your own.

Product Description

Indicator Light: Meaning
Solid Green: Functioning / Charging Completed
Flashing Red: Out of Battery
SolidRed: Charging

Product Parameters

Instructions

• Clean the food-contact parts and surfaces before use. And refer to “Cleaning and Maintenance” to clean the blender after every use.
• The amount should not exceed the maximum capacity line.
• Ensure the sealing ring is well installed before use. And the mixing cup is well-jointed with the base.

Charging Instructions

1. Charge the blender with a power adapter or power bank.
2. The blender can work as a power supply in emergencies by connecting your phone/tablet to the port in the base, via a USB cable. Tap the button to start charging.
   (Please ensure the blender is well-joined to avoid incidents that may happen)

Power Input

Power Output

Blending Instructions

1. Wash the fruits, peel and remove the seeds. Then cut the fruits into small pieces no more than 10 × 10 × 10 mm (so as the ice cubes’ size)

2. Hold the blender and open the lid counterclockwise.

3. Put your ingredients and beverage into the cup.

4. Rotate the lid clockwise. And ensure the spots on the cup and base are aligned.

5. Turn the product upside down and double-click the button to start blending.

6. When the blades start spinning, gently put the juicer upright or slightly shake the blender for better blending.
   Note: The device will pause automatically after running for 40 seconds. If you want a smoother and finer texture, double-click the switch to blend again.

7. After the processing, unscrew the lid and pour it into a jug to enjoy.
   Note: Hold the stirring cup when removing the lid so as not to unscrew the stirring cup from the base.

Vacuuming Instruction

Double-tap the vacuum button to start vacuuming. It takes 40 seconds per vacuum.

Note:

• DO NOT turn on the vacuum function while blending.
• DO NOT shake, or tilt the device when vacuuming.
• DO NOT open the lid when vacuuming.
• DO NOT vacuum when the blender is charging.

Cleaning and Maintenance

Cleaning the Food-Contact Cup

Please detach the blender’s body parts and clean them after blending. And mind the sharp blades when cleaning.

1. After pouring the smoothies out, put some water into the cup. Then activate the blender to blend for 5-10 seconds for self-cleaning.
2. Detach the body parts of the blender.
3. Rinse the food-contact cup under a tap or clean it in warm water with detergent if necessary.
4. Dry the cup part after the rinse.

Note:

• DO NOT immerse or rinse the motor base and the vacuum lid with any liquid. Clean with a wet cloth only.
• DO NOT use detergents containing abrasives to clean the blender.
• DO NOT clean the juicer in the dishwasher or sterilize it in disinfection.

Cleaning the Vacuum Lid

1. Rotate the screw nut counterclockwise and take out 3 parts in turn for cleaning.
2. Reattach them back in order after the cleaning.

Maintenance

• Frequently using the blender can keep the motor healthy.
• Place this product in a dry and ventilated place for long-time storage to prevent the motor from being damped.
• For the blender’s longevity, please fully charge the blender before not using it for a long time. And try to charge the blender every 3 months to prevent battery failure.

FQA

How can I pause the blending /vacuuming?

Press the power button once during to operation to stop it.

Why does the blender stop blending suddenly for no reason?

If the blades are stuck during working, please turn the blender upside down, and check whether the blades are blocked by the ingredients. Then restart the blender. Slightly shaking the blender during blending helps avoid stocking as well. (If the ingredients are too many or the liquid exceeds the 350 max capacity may cause the problem, too.)

Why can't I start the blender?

Please ensure that all blender parts are well joined and the two spots on the cup and base body are aligned.

What are the light indicators mean on the base part?

1 flashing light means an insufficient battery that the blender needs to be charged. 4 flashing lights indicate that the blender is not well-joined. 4 solid lights mean the blender is fully charged

Why can't I sip from the lid?

If the beverage you blend is too thick, it may be hard to directly sip from the lid. You may pour it into a cup to drink.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>