EASEHOLD Venus Pro 2 Vanity Makeup Mirror User Manual

EASEHOLD Venus Pro 2 Vanity Makeup Mirror

What’s in the Box

• Main Mirror
• 10X Magnifying Mirror
• 1m Power Cable
• User Manual
• Thank- You Card
• Cleaning Cloth

Specifications

Preventive and Cautionary Tips
Before operating your device, please read the below important notes:

• Keep all liquids away from the device.
• Ensure environmental conditions meet factory specifications.
• Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive electronics within the unit.
• Please use a qualified power adapter with quality and safety certification.
• Improper use or replacement of the battery may result in the hazard of explosion

Safety Tips

1. Never immerse the mirror in water or any other liquid.
2. Do not place, hang, or store the mirror in a place where it can fall or be pulled into a tub or sink
3.  protect against electrical hazards, do not use it while bathing or in the shower.
4. Never let young children use the mirror without supervision.
5. Repairs and services should always be carried out by an authorized service center. Never use the mirror if it is damaged.
6. Read all instructions carefully before using the mirror and keep them for later reference
7. Never expose the magnifying mirror to direct sunlight or reflected sunlight that might start a fire.
8. Please use a standard power adapter that conforms to the safety certification when charging the mirror.

Instructions

1. This product is specially designed to improve makeup and skincare routines
2. Press the power switch on the back of the mirror. Open/close the mirror to turn on/off the light automatically, or tap the switch button on the main mirror to turn on the light and hold the switch touch button to adjust the brightness.
3. The LEDs provide enough lighting when applying makeup.
4. This product comes with 2X & 3X magnification mirrors.
5. The 10X magnifying mirror can be attached to the main mirror.
6. Please use the included power cable to charge the mirror.
7. Please charge the mirror when the status LED flashes red. Otherwise, the lighting will turn off automatically.
8. The status LED will be in green color when the mirror is fully charged.
9. The LEDs will automatically turn off when there is no operation after 30 minutes
10. Please charge the mirror when you use it for the first time. Also, charge the mirror every 3 months when you don’t use it for a long time.
11. Remove the protection film before using the mirror.

How to Install Venus Pro 2

1. Align the support stand to the groove of the base
2. Insert the support stand into the groove. (You can pull the support stand from the groove to disassemble the mirror.)
3. There is a power port on the back of the mirror for charging the mirror.

How to Operate the Venus Pro 2 LED Mirror

1. Press the power button on the back of the mirror.
2. Open the mirror to turn on the lighting automatically.
3. Close the mirror to turn off the lighting automatically.
4. Tap the left touch button to turn on the lighting. and hold this button to adjust the lighting brightness.
5. Tap the right touch button to switch the lighting modes (white. warm and natural lighting effects)
6. The 10X magnifying mirror can be attached to the main mirror for detailed makeup.
7. The 180° horizontal rotation enables you to interchange between the standard and magnification mirrors easily.
8. The 90° vertical rotation enables easy height adjustment to reach the perfect viewing angle.

Regulatory Information

FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked with ‘CE’ and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU. the RoHS Directive 2011/65/EU and Amendment (EU)2015/863.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information, visit www.recyclethis.info.

/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or a designated collection point For more information, visit www.recyclethis.info.

Anke (Hong Kong) Network Technology Co., Limited.

Address : Room 01,21/F, Prosper Commercial Building, 9 Yin Chong Street, Kowloon, Hong Kong
Email : support@easehold.com
Website : easehold.com

Designed in Italy THEMIS AR Unterstützung UG Beedstrasse 54, In Dusseldorf, (40468), Deutschland

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>