XTOOL D1 Pro 10W Desktop Laser Engraver Golden Red User Guide

Quick Start Guide
D1 pro
D1.1.2_KD010623000′

D1 Pro 10W Desktop Laser Engraver Golden Red

Thank you!
Dear xTooler:
Thank you for purchasing xTool D1 Pro. We are so grateful for your recognition, and sincerely hope you will enjoy this product!
xTool D1 Pro is a high-accuracy and high-power laser engraver and laser cutter. From novice to expert, f rom home use to business, xTool D1 Pro is ready to give you the best laser engraving & cutting experience. Our mission is to make it easier for everyone to create with our machine. We attach great importance to product experience and user suggestions. Please let us know if you have any questions anytime. We are always here to help. You can join our facebook group which gathers 25000+ innovators like you, to share creative ideas and get inspired by others. By visiting our online store, you can also find our latest accessories and various materials to maximize the magic of xTool D1 Pro. Thanks again for your support, and we will consistently provide quality products and services in the future.
Sincerely,

Official Website: www.xtool.com
Facebook Group: xTool D1 Official Group / Makeblock xTool Official Group
Support Center: support.xtool.com
Technical Support: support@xtool.com

xTool D1 Pro provides two color options. This user manual uses the golden red version to describe how to assemble and set up your machine.

Unbox and check

The secret to getting ahead is getting started.
Are you ready to embark on a creative journey?
Let’s go!

Assemble xTool D1 Pro

You can visit support.xtool.com or scan the QR code to find the tutorial video.

https://support.xtool.com/hc/en-us/articles/5662836045975

The screws are used to set the tension of the timing belts. Do not fully tighten them. Otherwise, the timing belts may be damaged. If you can’t put the shaft through the timing belt, the possible cause is that the timing belt is set too tight. You can adjust its tension by turning the screw. Keep a small distance between the coupling and the motor, or the coupling can’t rotate properly or emit noises. Slide the two sliders down against the front plate. Fully tighten the two screws.

Pay attention to the front and back sides of the connector. Insert it properly.No scissors are included in the pack. Cut off the white cable ties, and keep the black ones. The screw is used to set the tension of the timing belt. Do not fully tighten it. Otherwise, the timing belt may be damaged. 80% done!
Excited to see your laser cutter begins to take shape!
Success is just around the corner!Use the thumb screw to fit the laser module You may need to repeat this process multiple times to tighten the thumb screw.
Use the thumb screwIf the handle is blocked, you can tighten or loosen the screw as follows.

1. Hold the handle to draw it away from the thread part

2. Rotate the handle to stop it from being blocked The screw is not tightened or loosened.

3. Release the handle
   The handle goes back to the default position.

4. Rotate the handle to tighten or loosen the screw

Insert the TF card before using xTool D1 Pro. Otherwise, some functions may fail, such as Wi-Fi connection- based processing, offline processing, and Framing in processing preview.

Congratulations!
You have completed the installation!
We’ve got a little surprise in our software to make your first project creative and memorable.
Download the software and get the novice task!

Meet your xTool D1 Pro

Set up xTool D1 Pro

Adjust the tension of the timing belts Try to set the timing belts on the right and left plates to the same tension, so that xTool D1 Pro can cut and engrave materials properly.

Set the position of the laser module

Put the focal length setting bar down Loosen the thumb screw on the other side and slide the laser module upward or downward After determining the position, tighten the thumb screw and put the focal length setting bar back To cut thicker materials, you can adjust the position of the rear plate on the laser module, based on the scale with which the focal length setting bar is aligned, to ensure better cutting performance.
For the 20 W laser module

By default, the focal length setting bar is aligned with scale 0. It’s recommended that you adjust the position of the rear plate according to the thickness of the material to be processed.
After adjusting the position of the rear plate, you can still use the focal length setting bar to set the position of the laser module.

For the 40 W laser module

Tips: The settings are tested under a laboratory environment and are for reference only. The setting may vary according to material, so it is recommended you test the materials before starting to process.

Download and install software

You can download xTool Creative Space (XCS) at our official website xtool.com or use the third-party software LightBurn to operate xTool D1 Pro.
Note: You need to purchase LightBurn before using it.

Create with example projects

Before starting your creation, you are advised to test the parameter settings and engraving performance first to prevent waste of materials.
For example, you can engrave on an area near the edge of a material to see the engraving performance. For valuable items, especially, you can engrave on a substitute for testing.xTool D1 Pro is delivered with a material pack that allows you to start your creation.
Scan the QR code to find example projects and tutorials.
Alternatively, you can click Support on xTool Creative Space (XCS) and then choose xTool D1 Pro > xTool D1 Pro Example Project Files & Tutorials. You can download the example projects and follow the instructions to create your first works.

https://support.xtool.com/hc/en-us/articles/5662836045975

Before creating your works, you can place the aluminum sheet in the working area of xTool D1 Pro to protect your desk or floor from being smoked or burned. If the aluminum sheet is not flat due to film removing, you can use masking tape to stick it on your desk or floor.

Use Rotary Attachment 2

You can connect xTool D1 Pro to Rotary Attachment 2 to engrave cylindrical or irregular materials.
Rotary Attachment 2 needs to work with a device and software.
For details about how to use it, visit support.xtool.com. Place Rotary Attachment 2 parallel to the working area of xTool D1 Pro.
Before you connect it to xTool D1 Pro , you may need to set its level based on the diameter of the material to be processed.

Level reference Set the level
Use the changing of the level from C to B as an example. Use the support module
The support module is applicable to the processing of irregular objects or objects that are too long for Rotary Attachment 2. You can place the support module as required.
Set the support module Turn the knob clockwise to move the support wheels upward Turn the knob counterclockwise to move the support wheels downward

Clean the laser module

For the 20W laser module, you are advised to clean it, including the inner and outer frames of the light shield, lens, and red light outlet, every time after it has been used for one consecutive hour.
When the light shield is dirty or laser beams can’t cut a material, you need to clean the laser module.

1. Turn off the device and remove the laser module from the device.
2. Remove the nozzle and its connector from the laser module.
3. Clean the inner and outer frames of the light shield with tissues or dust-free cloth moistened with alcohol; and clean the lens and red light outlet with a cotton swab moistened with alcohol.

References

• LightBurn Software
• xTool Support Center
• Smart Desktop Laser Cutter and Engraver | xTool Laser
• Smart Desktop Laser Cutter and Engraver | xTool Laser
• xTool Creative Space: Software Download for All xTool Machines

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>