FL Automatic Cat Feeder User Manual

Automatic Cat Feeder
User Manual

Accessories include

Before using, please make sure that the package includes the following components. If any part is missing, please contact our customer service. Product Usage

1. This product is designed for automatic pet feeding and is not recommended for outdoor use.
2.  This product is ntended for use only in dry ndoor areas.
3.  We are not responsible for any damages caused by improper use or failure to follow these instructions.

Before first use

• Please keep the packaging during the product warranty period, do not throw it away.
•  Check for shipping damage.
•  Before connecting the product to the power supply, please check whether the power supply is normal, the voltage and current ratings correspond to the power supply details shown.

Caution!
Choking hazard! Keep children away from any packaging materials that are
Potential sources of danger, such as suffocation.
Product parameters
Product Name: Smart Pet Feeder
Product material: ABS+304 stainless steel
Voltage/Current: 5V/1A
Product unfolded dimensions (Length Width Height in mm): 188188295mm
Packaging dimensions (Length Width Height in mm): 190190220mm
Capacity: 4L
Compatible particle diameter: 2-12mm
One serving weight: 6-lOG(according to Grain size varies)
Maximum number of servings: 9
Weight: l.45KG
Product description

1. Grain drum cover
2. Drying cover
3. Grain drum
4. Base body
5. Stainless steel feeding bowl
6. ABS feeding basin

Installation steps

l. nstall the power cable, or you con install dry batter iesa tthe same time ( batteries need to be purchased separately). You can also continue feeding after power failure.| 2. Put the stainless steel feeding bowl into the plastic feeding bowl.| 3. Lift the base body and align it with the feeding bowl slot and nstall it.

4. Ensure that the lock key of the base grain drum is “Eii’ “, align and install the grain drum (Pay
attention to the front and rear positions of the grain drum).| 5. After oading, turn the ock key f the grain drum to”   “and lock it.| 6. Put the desiccant nside the back of the grain bucket lid and then fasten the desiccant

7. Align the grain drum cover with the grain drum and press down the edges to ensure a tight fit.| 8. Open the lid of the bucket if you need to add food.| 9. Standby power supply: You need to purchase 3pcs AA batteries, and open the battery compartment at the bottom of the fuselage base, and then cover them.

Instructions for Use

Button Functions ( Control Panel as shown in the diagram below)

| Button Definitions
---|---
| Long press for 3 seconds (beep) to enter the world time setting interface/single press to increase .
| Press twice to manually feed/single press to decrease.
| Long press for 3 seconds (beep) to enter the current meal setting interface, press twice to cancel/ restore the corresponding feeding plan (screen numbers will blink when canceled).
| Single press to confirm. Long press for 3 seconds to shut own (screen will not display, feeding plan will not be xecuted).
| Simultaneously ong press both buttons for 3 seconds, and hear two consecutive “beep beep” sounds to restore actory settings.

Operation instructions

1. Initial time setting: Long press the” ” button for 3 seconds (beep) to enter the hour parameter setting mode (the hour display area on the screen will blink). Press the” ”   “and”   “buttons to set the hour. After completion, press the “button to confirm and enter the minute number setting mode (the minute display area on the screen will blink), Press the minutes. After completion, press the”   the”   and” “buttons to set “button to confirm the time setting  and exit.
2.  Set the time and parameters for the first meal: Long press the”   ” button for 3 seconds (beep) to enter the hour parameter setting mode for the first meal (the hour display area on the screen will blink). Press the” “and” . buttons to set the hour. After completion, press the” ” button to confirm and enter the minute number setting mode (the minute display area on the screen will blink), Press the” “and” ” buttons to set the minutes. After completion, press the” ” putton to confirm the time setting and enter the feeding portion setting mode, Press the” “and” “ puttons to set the feeding portions. After completion, press the” ” button to save the current settings.
3. The methods for setting the second, third, and fourth meal feeding time and parameters are the same as above, just long press the corresponding number button (beep) to enter the setting interface for setting.
4. Simultaneously press and hold the”   “+” ” buttons for 3 seconds and listen to two “beep” sounds to restore the factory settings.

Meaning of screen icons

1. Feeding meal icons (Meal 1-4): A black icon constantly lit indicates that the meal has not been fed, and a black icon not lit indicates that the meal has been fed.
2. Battery icon: A black icon constantly lit ndicates that the battery is installed, no light indicates that the battery is not installed, and a red light with a black icon blinking indicates low battery and needs to be replaced.
3.  Grain Jam Indicator Light (Red): A red grain jam indicator light indicates that the current product is experiencing a grain jam situation. If the light is not on, it means that the current product is not jammed. If the red light is  blinking, it indicates low battery power and requires the replacement of No.5 battery.

Attention

• Do not mix new and old batteries or use different models of batteries together.
•  Replace the standby batteries promptly when they are depleted to avoid electrolyte leakage and damage to the product.
• If not used for a long time, please remove the battery to avoid battery electrolyte leakage.
•  Avoid dropping from a high place or subjecting it to severe mpact.
•  Do not exert excessive pressure and do not place it on an uneven surface.
•  Do not dismantle the base of the device, as disassembling will void the warranty.
•  After use, dismantle the grain drum cover, grain drum, and stainless steel bowl for cleaning. After cleaning, wait for them to dry before reassembling.
•  The base body and outer parts can be wiped with a cloth, but do not immerse it of water for cleaning.
•  Do not use solvents such as alcohol or toluene to clean this product to avoid damage.

Unhappy?
Please don’t be mad and give us a chance to solve the problems for you of the product. We will provide you with a 100% satisfactory solution.
Problems may happen:
Stopped working
Quality problems
Product instruction s not
clear enough
Other problems
Solutions we would like to offer:
Online customer service within 24 hours during weekday
Get a replacement or money back
Clear product nstructions
I-YEARS warranty
If you have any problems with the item. Please email us of the issue, we will solve the problem for you.

Contact Us!
ViAaAmazon
Pick for Life
EML: Support@pickforlife.net
Installation Video https://bit.ly/3XDYhTD?r=qr

Documents / Resources

| FL Automatic Cat Feeder [pdf] User Manual

---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>