FL-ESPORTS K212 Mechanical Gaming Keyboard User Manual
- June 6, 2024
- FL-ESPORTS
Table of Contents
WIRED &BT&2.4G THREE-MODE RGB MECHANICAL
KEYBOARD USER MANUAL
RGB BACKLIGHT
MECHANICAL GAMING KEYBOARD
N-Key rollover (NKRO) RGB backlight mechanical keyboard
A key conflict is a situation where the keyboard fails to register some keys
because the user presses multiple keys at the same time. The First 684(ey NKRO
tech offers the perfect solution to this problem.
Professional mechanical switch
F12 geared with a superb mechanical switch. which performance is comparable to
Cherry’s original switch.
Standard lithium battery 2000mAh
68 keys keyboard, ail keys anti-ghosting in wired 1 BT 12.46 mode. RGB
backlight, 5.0 and 3.0 double Bluetooth (can connect 3 Bluetooth devices) 2.46
dedicated receiver (factory 1 to 1 match). the standard mechanical switch
feels USB cable uses 7004 interfaces. Switch wired t BT 4 2.4G mode through
the bottom switch.
Product parameters:
Switch: WhitefRed1Brown
KeyStroke: 1.5mm
Key Life: More Than 50 Million times
Anti-ghost Keys: AI keys
Keyboard Interface: USB
Number of keys: 68 keys
Ring: Yes
Connection Mode: Type-C93112.4G
Keycap technology: PBT Double-shot
Operating current: 250mA
Manufacturer: FL ESPORTS ELECTRONICS CO.LTD,
Address: Building 13.Suzhou Industrial Zone.ShilOng TOwn.Dongguan
City.Guangdong.China www.flesportS.corn
warm Tips: The product appearance. performance and detailed specifications may
be updated without prior notice depending on the operational environment or
another special requirement.
Combo Functional Keys w/ FN >>>
F N+1! : –Fl
FN+2@ –F2
FN+3tt : –F3
FN+4$ : –F4
FN+5%: –F5
FN+6^ : –F6
FN+7& : –F7
FN+8*: –F8
FN+9 (: — F9
FN+O): F10
F N+-_: Fll
FN+=+: F12
FN+I:–PRT
FN+0:–SCR
FN+P:–PAUSE
FN+J:–INS
FN+K:–HOME
FN+L:–END
FN+Right ALT:–APP
FN+[{:–VOLUME-
FN+}):–VOLUME+
FN+1f:–MUTE
On-Board backlight setting:
FN + Right CTRL: Backlight mode switch.
FN+ Right SHIFT: Single color switch.
FN+PGDN: Restore to solid single backlight mode (Default RED LED color).
FN+Direction key combination >>>
Backlight brightness adjustment:FN+↑↓
FN+1:Backlight Brightness Down, FN+↑: Backlight Brightness Up.
Backlight speed adjustment: FN+↔
FN+←: Backlight speed Down, FN+→,Backlight speed Up.
Wireless (Bluetooth/2.4Ghz) connection guide >>>
A.Bluetooth connection:
Slide the switch to left (Bluetooth), hold FN + CVW/E (any key) for 3s, the
keyboard will activate the searching mode and ESC keeps flashing in Blue. ESC
will restore to normal backlit color if the keyboard Is connected
successfully, or the keyboard will log out pairing and enter sleep mode after
the 90s.
B. 2.4G Connection:
Slide the switch to the right (2.4G) and then get the 2.4Ghz dongle plugged,
long-press FN + R for 3s if the keyboard is not connected. the keyboard will
activate the searching mode and ESC keep flashing in Green. ESC will restore
to normal backlit color If the keyboard is connected successfully, or the
keyboard will log out pairing and enter steep mode after the 90s.
C. Switch between different connected devices:
In Bluetooth wireless mode, the keyboard enables the user to connect and store
3 different devices. Click FN +Q (the recent connected one) /WM to easily
switch between them.
D. Reconnection:
When the keyboard enters the Bluetooth/2.4G mode, it will activate reconnect
mode if there is a device connected before. ESC key flashes at a slow flashing
(1 time/s) frequency (blue in Bluetooth, green in 2.4G) If the reconnecting is
successful, the indicator light will recover current LED mode. ff it fails,
the keyboard will automatically enter sleep mode after the 90s.
E.Charging instructions ( Bluetooth mode only):
When the USB cable is plugged in for charging, the BACK key LED flashes blue
once per second, after fully charged the LED recovers current LED mode.
F. Low voltage indication:
When the battery voltage is lower than 3.3V, the BACK word key LED flashes 3
times/second In red; if no key Is triggered within 10 seconds, the low-voltage
indicator will go out. Press any key to start the low-voltage indicator.
G. Sleep mode:
a. The keyboard enters sleep mode after 90 seconds when the keyboard is
disconnected from the device or the device falls to reconnect.
b.The keyboard is connected to the device normally, and it enters sleep mode
when the keyboard is inactive for 120 seconds. Press any key to trigger the
end of steep.
H.Caps lock, Win Lock (underwired mode):
Caps lock or Win lock key lights in white LED when turned on. Recover current
led mode when turned off.
The secondary function of the CapsLock key:
When you press CAP LOCK and press other keys at the same time, CAP LOCK is the
FN key. When the CAPSLOCK key Is pressed alone, It is the CAPSLOCK key. PS:
This function can be turned on/off by short pressing “FN+Left ALT “once
(Default Is on).
Combination key:
- FN+ESC: Long press for 3 seconds to restore factory mode.
- FN+ (21VVIE: Long press 3 seconds to start search device, short press to enter device switching.
- FN+ R: Long press 3 seconds to start search receiver palling.
- FN+ WIN: lock or unlock WIN key, with memory function.
- FN+BACKSPACE: can query the battery power under Bluetooth mode, “0-1” 10 keys LEDs will be green and the prompt is as follows:
“0-1” 10 keys LEDs will be green and the prompt is as follow** these 10 lights are on, other lights are off):
4.2V-100%, 10 keys from 1-0 display green light;
3.6V-50%, 5 keys from 1.5 display green light;
3.9V-75%, 8 keys from 1.8 display green light;
3.3V-25%, 3 keys from 1.3 display green light.
PS: The battery power will be displayed when you press the “FN+ BACKSPACE” under Bluetooth mode, and it will return to the current light effect after releasing it.
Operating current in Bluetooth /2.4G mode:
A connected device with all LED backlights on (in single white color)z230mA,
default mode = 165 mA.
A connected device with all LEO backlight off = 23 mA.
Steno mode =0.69 mA (when no operation In 120 seconds.