FL-ESPORTS CMK87 Three Mode 87 Keys RGB Wireless Mechanical Keyboard Instructions
- June 6, 2024
- FL-ESPORTS
Table of Contents
ESPORTS CMK87 Three Mode 87 Keys RGB Wireless Mechanical Keyboard
Instructions
CMK87 wired/ BT/ 2.4G three mode specification
Brief introduction :
87 keys keyboard,RGB backlight, Electronic solution: wired +BT 5.03.0+2.4G wireless three mode, Compatible with WINDOWSAndroid and IOSMAC systems, Lithium battery 1100-2000mAh, with charging and boosting circuits ,USB cable using type-c interface.
Indicator:
CAPSLOCK (monochrome), SCR LOCK(monochrome), WIN LOCK(monochrome), charge mode light {charge indicator (When charging, red light is steady on, full is off, and red light flashes at low power) + mode indicator (green light in 2.4G mode +white light in wired mode + blue light in BT mode )}, as shown below:
Pull switch function:
Two-stage pull switch: Windows_Android IOS_MAC system switch
Three-stage pull switch: wired mode OFF mode BT mode
Combination key:
Common parts
- FN+ESC: Press for 3 seconds to resume factory mode.
- FN+ Left WIN: Lock both left WIN and APP (IOS MAC users are automatically unlocked)
- FN+INS: Backlight mode switch
- FN+DEL: Backlight color switch
- FN+END: Restore to solid single backlight mode
- FN+: Backlight brightness adjustment — FN+: Backlight Brightness Up, FN+:Backlight Brightness Down. (F5 and F6 adjust the backlight brightness in the IOS_MAC system)
- FN+: Backlight speed adjustment — FN+:Backlight speed Down, FN+Backlight speed Up.
- FN+1: Short press to switch to BT device 1, and press for 3S to enter pairing
- FN+2: Short press to switch to BT device 2, and press for 3S to enter pairing
- FN+3: Short press to switch to BT device 3, and press for 3S to enter pairing
- FN+4: Press for 3S to enter 2.4G paired receiver mode
- FN+BACKSPACE: Query the current battery quantity. As shown the followings:
100% – from 1 to 0 total 10keys will be in green light
75% – from 1 to 8 total 8keys will be in green light
50% – from 1 to 5 total 5keys will be in green light
25% – from 1 to 3 total 3keys will be in green light
PS: The battery quantity will be displayed when you press the “FN+ BACKSPACE”, and it will return to the current light effect after releasing it.It can be queried only when the battery is powered independently.
WINDOWS_ Android System
- FN+F1– Brightness
- FN+F2– Brightness+
- FN+F3– WIN+TAB (Mission control)
- FN+F4– WIN+E (Turn on my computer)
- FN+F5– Email
- FN+F6– Homepage
- FN+F7– Previous
- FN+F8– Play Pause
- FN+F9– Next
- FN+F10– Mute
- FN+F11– Volume
- FN+F12– Volume+
IOSMAC System
- FN+F1– Brightness
- FN+F2– Brightness+
- FN+F3– Mission control
- FN+F4– Back to homepage
- FN+F5– Keycap area brightness
- FN+F6– Keycap area brightness+
- FN+F7– Previous
- FN+F8– Play Pause
- FN+F9– Next
- FN+F10– Mute
- FN+F11– Volume
- FN+F12– Volume+
- PRT– Screen captureCommand+Shift+4
- SCR– Call SiriCommand+space
- Pause– Exit the applicationCommand+Q
- CTRL–control
- ALT– option
- WIN–Command
2.4GwiredBT mode indicator description
2.4G mode:
Pull the switch to 2.4G mode, the factory has paired receiver 1 to 1 ok, but
if you need re-pair the dongle, press FN+4, and the green light of the
charging indicator will flash (3 times /S) to search the receiver. After a
successful connection, the green light is on for 3 seconds and then off. When
the paired dongle cannot be found for the 60s, the matching code will be quit,
and the charging indicator will be extinguished. The keyboard reconnection
needs 10s, at the same time the green light of the charging indicator will
flash slowly, and the keyboard will go to sleep when the keyboard fails to
connect back. After the reconnection is successful, the green light is on for
3 seconds and then off. When the keyboard is not used, the backlight will be
turned off after 120S, and the keyboard will fall asleep after 10MIN.
Wired mode:
Pull the switch to wired mode, and the charging indicator will be red or off,
which shows be charging or full charging.
BT mode:
Pull the switch to BT mode, the combination key for BT connection is 1, 2, and
3. Long press FN+1 /2 /3 for 3 seconds to broadcast, short press alone to
switch BT devices, press the combination key for 3 seconds to enter the
pairing state and the blue light of the charging indicator will flash (3 times
/S). After the pairing is successful, the blue light is on for 3 seconds and
then off. When the matching device cannot be found in the 60s, the pairing
will be quit, and the charging indicator will be extinguished. The keyboard
reconnection needs 10s, at which time the blue light of the charging indicator
will flash slowly, and the keyboard will go to sleep when the keyboard fails
to connect back. After the reconnection is successful, the blue light is on
for 3 seconds and then off. When the keyboard is not used, the backlight will
be turned off after 120S, and the keyboard will fall asleep for 10MIN.
Charging mode:
When the USB cable is plugged in, it means in charging if the indicator light
shows in red and it will be off after the voltage reaches 4.2V, which means
the power has been fully charged. When you plug in the USB cable, it charges
whether the bottom toggle switch is on or not.
Low power mode:
When the power is less than 20%, the charging indicator will alternately flash
red to prompt the user to charge. (Note: When the battery voltage is lower
than 3.1V, the keyboard will stop working directly, and can not be waked up.
At this time, when the key is hit, the keyboard will only have the charging
indicator flashing and no other response. Be sure to plug in the USB cable to
charge to 3.1V above so the keyboard could be waked up.)
matters need attention:
1. When BT is broadcast, two BT names “BT5.0KB” and “BT3.0KB” will be
displayed at the same time if the receiver is BT version 4.0 or above. In this
case, “BT5.0KB” will be preferred for connection. When the receiver version of
the device is below BT 4.0, only one BT name “BT3.0KB” will be displayed. Only
“BT3.0KB” can be selected to connect.
FCC ID: 2A4V8-CMK87
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>