FL ESPORTS FL980V2 RGB Dual System Three Mode Mechanical Keyboard User Manual

August 31, 2024
FL-ESPORTS

FL ESPORTS FL980V2 RGB Dual System Three Mode Mechanical Keyboard

USER MANUAL

Product Information

Specifications

  • Model: FL980 V2
  • Modes: 2.4G, Wired, Three Mode
  • Compatibility: Windows, Mac
  • Backlight: Customizable
  • Battery: Rechargeable

Product Usage Instructions

Switching Modes

To switch between modes, press the button on the back of the
keyboard:

  • 2.4G Mode: Ideal for Windows
  • Wired Mode: Suitable for both Windows and Mac
  • Three Mode: Better for Mac

FN Combination Keys Manual

  • *  **Common Part:**
    • FN + ESC / FN + Left WIN: Long press for 3
      seconds to restore factory mode or lock/unlock the WIN key.

Backlight Control

You can customize the backlight using various key
combinations:

  • *  **Backlight Mode Switch:** FN + Z/X/C
    • Backlight Color Switch: FN + V

Frequently Asked Questions (FAQ)

Q: How do I know the battery power level?

A: Press FN + UP/Down key to query the battery power under the
current mode.

Q: What should I do in low power mode?

A: When the charing indicator flashes red, it indicates low
power. Connect the USB cable to recharge the keyboard.

K237_FL980 V2_FCC

FL980 V2: 2.4G&WIRED&THREE MODE

Better for WIN

Tips : By pressin button on the back of keyboard to switch quickly between 2.4G/Bluetooth/Wired mode. *The above keycap layout is for reference only, please see the real product.

FL980 V2: 2.4G&WIRED&THREE MODE

Better for MAC

Tips : By pressin button on the back of keyboard to switch quickly between WIN and MAC system.

*The above keycap layout is for reference only, please see the real product.

FN combination keys manual

COMMON PART

Key

Function description

FN+ESC FN+Left WIN

Lon press for 3 seconds to restore factory mode Lock or unlock the WIN key

FN+Ri ht ALT FN+Ri ht SHIFT FN+DEL FN+UP/Down
key FN+Left/Ri ht
key FN+Backspace
FN+1 FN+2
FN+3
FN+4
FN+ZXC FN+V

Backli ht mode switch
Backli ht color switch
Go to static backli ht
chan e backli ht bri htness, up o bri hter and down o darker
chan e the backli ht speed, left o slow and ri ht o fast
Query the battery power under mode. (only if the battery is powered separately)
Press to switch to device 1, and press for 3S to enter the pairin Press to switch to device 2, and press for 3S to enter the pairin Press to switch to device 3, and press for 3S to enter the pairin
Pressin FN combination key in 3seconds to enter 2.4G paired receiver mode
Backli ht customized key 1/2/3
Customized backli ht recordin save

Windows_Android System model

Key
FN+F1 FN+F2 FN+F3 FN+F4 FN+F5 FN+F6 FN+F7 FN+F8 FN+F9 FN+F10 FN+F11 FN+F12 FN+PGUP FN+PGDN FN+I FN+O FN+P FN+M

Function description
Display bri htness Display bri htness + WIN+TAB ( Mission control ) WIN+E ( Turn on my computer ) Email Homepa e PREV Play Pause NEXT Mute Volume down Volume up HOME END PRTSC SCRLK PAUSE APP

IOS_MAC System model

Key

Function description

F1

Display bri htness –

F2

Display bri htness +

F3

Mission control

F4

Launchpad

F5

Default

F6

Default

F7

PREV

F8

Play Pause

F9

NEXT

F10

Mute

F11

Volume down

F12

Volume up

2.4Gwiredmode indicator description
2.4G mode:
Pull the switch to 2.4G mode, factory has paired receiver 1 to 1 ok, but if you need re-pair the don le, press FN +4, and the reen li ht of the char in indicator will flash to search the receiver. After successful connection, the reen li ht is on for 3s and then off. When the paired don le cannot be found for 60s, the matchin code will be quit and char in indicator will be extin uished. The keyboard reconnection needs 10s, at the same time the reen li ht of char in indicator will flash slowly, and the keyboard will o to sleep when the keyboard fails to connect back. After the reconnection is successful, the reen li ht is on for 3s and then off. When the keyboard is not used, the backli ht will be turned off after 120s, and the keyboard will fall asleep after 10min.
Wired mode:
Pull the switch to wired mode, and the char in indicator will be red or off, which shows be char in or full char in .
mode:
Pull the switch to mode, the combination key for connection is 1, 2 and 3. Lon press FN+1 /2 /3 for 3s to broadcast, short press alone to switch devices, press the combination key for 3s to enter the pairin state, and the blue li ht of char in indicator will flash. After the pairin is successful, the blue li ht is on for 3s and then off. When the matchin device cannot be found in 60s, the pairin will be quit and char in indicator will be extin uished. The keyboard reconnection needs 10s, at which time the blue li ht of char in indicator will flash slowly, and the keyboard will o to sleep when the keyboard fails to connect back. After the reconnection is successful,the blue li ht is on for 3s and then off. When the keyboard is not used, the backli ht will be turned off after 120s, and the keyboard will fall asleep after 10min.
Char in mode:
When the USB cable is plu ed in, it means in char in if the indicator li ht shows in red and it will be off after the volta e reach 4.2V, which means the power has been fully char ed. When you plu in the USB cable, it char es whether the bottom to le switch is on or not.
Low power mode:
When the power is less than 20%, the char in indicator will alternately flash red to prompt the user to char e. (Note: When the battery volta e is lower than 3.1V, the keyboard will stop workin directly, and can not wake up.

At this time, when the key is hit, the keyboard will only have the char in indicator flashin , and no other response. Be sure to plu in the USB cable to char e to 3.1V above so keyboard could be waked up.)
Matters Need Attention:
1. When is broadcast, two names “5.0KB” and “3.0KB” will be displayed at the same time if the receiver is version 4.0 or above. In this case, “5.0KB” will be preferred for connection. When the receiver version of the device is below 4.0, only one name “3.0KB” will be displayed. Only “3.0KB” can be selected to connect.
2. When Connectin device, pay attention to the code indicator. The device can search for the keyboard only when the indicator is flashin quickly. If it is a slow flash state, representin the keyboard in the state to back connect (At this point, the device cannot search for the keyboard), you need to press the code combination one more time (FN + 1 or 2 or 3), see the li ht flash to loosen, the equipment can normal search to the keyboard.

Product Spec Data

Product Type: FL980 V2 RGB dual system three mode mechanical keyboard

Product Size387.8mmcLx 143mmcWx 40.8mmcH

Total key number 97 keys

Switch lifespan>50 millions

Keyboard functionAll keys anti- hostin

Conduction Travel1.5mm~2.4mm

Workin volta e: 5V

Cable len th1.6 meters

Cable connector typeTYPE-C

Keyboard connector typeUSB2.0

Manufacturer: DONGGUAN FL ESPORTS ELECTRONICS CO.,LTD. Address: Buildin B,Sizhou Industrial Zone,Shilon Town,
Don uan City,Guan don ,China Website: www.fl espor ts.com.

Official Website

The software can be redefined with your own button functions and combinations, and backli ht effects can be updated and downloaded.

Software official download website: www.f l espor ts.com
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the followin two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, includin interference that may cause undesired operation. Any chan es or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B di ital device, pursuant to Part 15 of the FCC Rules. These limits are desi ned to provide reasonable protection a ainst harmful interference in a residential installation. This equipment enerates, uses and can radiate radio frequency ener y and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no uarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turnin the equipment off and on, the user is encoura ed to try to correct the interference by one or more of the followin measures: — Reorient or relocate the receivin antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet eneral RF exposure requirement. The device can be used in portable exposure condition without restriction.

200x110mm

20240820

K237_FL980 V2_FCC

200x660mm

100g

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals