LINEA TEKNA Professional Chair User Guide

Professional Chair
User Guide

TEKNA Professional Chair

For correct posture it is necessary adjust seat height and angle, in order to balance the pressure on the spine and keep feet well lean on the ground. Sit with trunk up upright position letting the backrest adheres perfectly to the hips, creating a 90° angle with the knees.

| |
---|---|---

ADJUSTMENTS

• A. Seat height adjustment
  Use the front lever situated under the seat on the right. Pull lever upwards and raise or lower the seat by decreasing or increasing body pressure respectively.

• B. Tilt tension control
  Turn the handle in a clockwise direction to increase the tilt tension, or in an anticlockwise direction to decrease.

• C. Back angle adjustment
  Operate the lever located under the front of the seat on the left outward to free or block the tilting movement. Push the lever inwards to lock the backrest in the desired position.

• D. Seat height adjustment
  Operate the lever upwards located in the front underseat to the right of sitting. Apply pressure with body to scroll forward e back the seat. To release the lever once you have chosen the desired seat position.
  SYN 03

• E. Lumbar adjustment
  Raise or lower the lumbar support to the right level.

• F. Head support adjustmentst
  Pull up or push down and tilt the head support into the right position.
  OPTIONAL

• G. Armrests height adjustment
  Push the bottom to allow the movement for height adjustment. Release it to block the position.

SAFETY

IMPORTANT INFORMATION
REGARDING OUR SEATING PRODUCTS:
Use this product only for seating one person at a time. Do not use chair unless all bolts, screws and knobs are tight.At least every six months, check all bolts, screws and knobs to be sure they are tight. If parts are missing, broken or worn, stop use of the product until repairs are made using factory authorized parts. Failure to follow these warnings can result in serious injury. The seating product you have has been designed for normal use, which typical office environment for 8 hours per day, 5 days per week. Care should be taken to avoid hazardous environments and incorrect use: the chair should not be too close to cables, stairs, doors, heat sources etc. and the user should never stand on the seat or sit on thearms, etc.

MAINTENANCE

• Cleaning
  Depending on the fabric utilised, best results are usually obtained by brisk hand brushing or by vacuuming. Surface stains can be removed with a damp sponge; more  tubborn stains can be treated with a dry cleaning spray or gentle detergent.

• Repairs
  Repairs to or maintenance of the regulating mechanism and gas column of the chair should be carried out only by authorised personnel.

GARANTEE

(VALID FOR 2 YEARS)/ GARANTIE (2 ANS)
The guarantee is valid from date of purchase shown on the invoice/sales receipt. The guarantee does not cover normal wear to parts which undergo continuous use, such as fabric and castors; damage due to incorrect use or non observance of the user’s guide; inapproriate maintenance.
In cases where the chair is used for more than 8 hours per day, the guarantee is reduced relative to the work shift periods.
The manufacturers cannot enter into debate on any issue beyond those outlined above. The guarantee is not renewable or extendable.

MAXIMUM CAPACITY

RECYCLIN DESTINATION

KG
1| | X| | | | 100| 0,65
2| | X| | | | 100| 1,46
3| | | X| | | 0| 1
4| | X| X| | | 100| 3,3
5| | X| | | 100| 0,6
6| X| | | | | 0| 1,3
7| | | | XX| | 0| 0,46
8| | X| | | | 100| 2,7
TOTAL| 75,5 %| 13,15

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>