ATEN CS1942ATC 2 Port USB 3.0 4K Dual Display DisplayPort User Guide
- June 16, 2024
- Aten
Table of Contents
CS1942ATC
2-Port USB 3.0 4K Dual Display DisplayPort
KVMP™ Switch for ATC
Quick Start Guide
A Hardware Overview
CS1942ATC Front View
CS1942ATC Rear View
Installation
Package Contents
1 CS1942ATC 2-Port USB 3.0 4K Dual
DisplayPort KVMP™ Switch for ATC
4 DisplayPort 1.2 cables
2 USB 3.1 Type-A to Type-B cables
2 microphone cables
2 speaker cables
2 power adapters and power cords
1 user instructions
Support and Documentation Notice
All information, documentation, firmware, software utilities, and
specifications contained in this package are subject to change without prior
notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support
www.aten.com/support
Scan for more information
Product Page
https://www.aten.com/global/en/products/modelno/cs1942atc/
User Manual
http://www.aten.com/ext_libraries/manuals.php?n=cs1922atc
CS1942ATC 2-Port USB 3.0 4K Dual Display DisplayPort KVMP™ Switch for ATC
A Hardware Overview
-
port LEDs
-
mode selection pushbutton
-
port selection pushbuttons
-
audio jacks
-
USB 3.1 Gen 1 Type-A port
-
grounding terminal
-
power jacks
Console Ports Section -
USB Micro-B port (fi rmware upgrade)
-
RJ-11 port
-
USB 2.0 Type-A ports
-
RS-232 serial port
-
audio jacks
-
USB 3.1 Gen 1 Type-A port
-
primary / secondary switch
-
DisplayPort out
KVM Ports Section -
DisplayPort in
-
RS-232 serial ports
-
audio jacks
-
USB Type-B ports
Installation
-
Ground the CS1942ATC by connecting one end of a grounding wire to the grounding terminal and the other end to a suitable grounded object.
Note: Do not omit this step. Proper grounding helps to prevent damage to the unit from power surges or static electricity. -
Connect your USB keyboard and USB mouse to the unit’s USB 2.0 Type-A ports.
-
Connect your DisiplayPort-enabled displays to the unit’s DisplayPort output ports.
-
Connect your primary microphone and speakers to the unit’s audio jacks located on the front panel. Optionally, connect your secondary microphone and speakers to the unit’s audio jacks located on the rear panel.
Note: The microphone and speakers connected into the front panel have priority over those connected into these jacks. -
Using the provided cables, connect the audio, video, RS-232, and USB ports of up to 2 PCs to the KVM ports section on the KVM switch.
Note: Make sure that all the connectors from one PC are connected to the same KVM ports section (all in CPU1 and all in CPU2). -
(Optional) Connect your USB peripherals to the unit’s USB 3.1 Gen 1 Type-A ports.
-
(Optional) Connect your RS-232 devices such as a printer to the unit’s RS232 serial port from the console ports section.
-
(Optional) To use a remote port selector for port selection, plug its cable into the RJ-11 port.
Note:
• To purchase a remote port selector for CS1942ATC, contact your ATEN dealer for more information.
• To use a remote port selector for port selection, make sure to slide the primary / secondary switch to the p position. -
Connect the power adapters to the unit’s power jacks. Now the CS1942ATC is powered on.
Note: We recommend connecting both power adapters to the unit for power redundancy. -
Power on the computers, displays, and the other connected devices.
Operation
There are several convenient methods you can use to operate the CS1942ATC to
switch KVM control to a connected device.
Manual Switching
To bring complete focus (KVM, USB, and audio) to a computer, use one of the
following methods.
- Press the port selection pushbutton that corresponds to that computer.
- Press the mode selection pushbutton once (the mode icons light up) and then press the port selection pushbutton that corresponds to that computer, and all three port icons light up.
Hotkey Switching
Press and hold [Ctrl] [n]: Brings the KVM, USB, and audio focus to the
computer attached to the port corresponding to the specified port ID.
Note: The n stands for the computer’s port ID number 1 or 2.
For more information on the unit’s operation, please refer to the user manual.
© Copyright 2023 ATEN ®
International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co.,
Ltd.
All rights reserved. All other trademarks are the property of their respective
owners.
Part No. PAPE-1223-Y80G Released: 08/2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>