motionics CR2032 Bluetooth Digital Indicator User Guide
- June 16, 2024
- motionics
Table of Contents
Bluetooth Digital Indicator
BlueDial Flat – User Guide
Important Notes
- Turn off the device (1) after use. It will NOT turn off automatically.
- Do NOT open the device. Opening causes permanent damage and voids the warranty.
- Change coin battery when low battery icon shows on indicator display to avoid false readings.
Description
-
Zero/On Button – Short press when dial is off – turn on dial indicator
– Short press when dial is on – zero dial reading
— Long press when dial is on – turn off dial indicator -
ABS/Preset Button – Short press – switch dial indicator between absolute measurement mode and relative measurement mode
— Long press – set preset value -
Unit Button – select reading in inch/mm
-
Status LED
– Blue LED Flashing – Bluetooth transmitter on, waiting to be connected
— Blue LED Solid – Bluetooth transmitter connected
— Blue LED off – Bluetooth transmitter off -
Dial Battery — insert CR2032 battery
https://motionics.com/product/bluedial- flat/
Included in the box
- BlueDial Flat 1X
- CR2032 Battery1X
- User Guide 1X
Compatible Software
- iOS: MultiGage Reader (download for FREE from the App Store)
- Android: MultiGage Reader (download for FREE from the Play Store)
| MultiGage Reader App iPhone/iPad | MultiGage Reader APP Android |
|---|
https://apps.apple.com/us/app/multigage- reader/id1038265515| https://play.google.com/store/apps/details?id=com.motionics.multigage&pli=1
Quick Start
- Insert CR2032 coin battery into dial indicator if it’s a #rst-time use.
- Short press Zero/ON button to turn on BlueDial Flat.
- Make sure blue LED is “ashing.
- Run one of the apps, then tap + button to enter pairing page.
- Wait for the software to #nish scanning nearby devices, then select
- BlueDialFTxxxx to connect.
- Once paired, BlueDial Flat readings show in the software.
- To turn o! BlueDial Flat, long press the Zero/ON button.
- Bluetooth transmitter goes to sleep after 3 minutes if there is no connection.
- To wake up the Bluetooth transmitter, turn BlueDial Flat o! for at least 5 seconds and then turn it back on.
Motionics, LLC
© 2023 Motionics, LLC| www.motionics.com
All Rights Reserved.| info@motionics.com
Made in the U.S.A.
---|---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>