KAAURASWBTA Smart Watch User Guide

: June 16, 2024
: Aura

Table of Contents

KAAURASWBTA Smart Watch
Product Information
Product Usage Instructions
FAQS
SAFETY & WARNINGS
Maintenance
Charging and Battery
Waterproof Performance
OPERATION
APP INSTALLATION
FUNCTIONS
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KAAURASWBTA Smart Watch

Product Information

Specifications:
- Model: KAAURASW BTA
- Safety & Warnings
- Maintenance
- Charging and Battery
- Wearing the Watch
- Skin Allergies
- Waterproof Performance
- Medical

Product Usage Instructions

Charging and Battery:
- To charge the watch, align the charging contacts of the watch with the metallic contacts on the charging cable.
- The charging power indicator will appear on the watch screen when the charging is successful.
- It is important to note that the watch needs to be charged to activate it when it is started for the first time.
- Only use the charger supplied with this watch and avoid using any other charger.
Wearing the Watch:
- To wear the watch, simply strap it onto your wrist.
- The strap can be removed by sliding the quick release on the strap.
Skin Allergies:
- If you experience any skin allergies while wearing the watch, it is recommended to remove the watch and consult a healthcare professional.
- Discontinue use if the allergies persist or worsen.
Waterproof Performance:
- The watch has a waterproof performance, but it is important to prevent water from accumulating in the speaker and microphone holes.
- If water does get inside, make sure to dry it thoroughly before using the watch to avoid affecting the sound quality.
Medical:
- If you have any medical conditions or concerns, it is advised to consult a healthcare professional before using the watch.
Operating the Watch:
- Power on: When the watch is powered off, press and hold the function button for 5 seconds to turn it on. The home screen of the watch will be displayed after booting.
- Touch screen operation: From the home screen, swipe to the right to access the menu screen, then tap the function icon to enter the corresponding sub-menu.
- Wake-up screen: When the watch screen is off, you can press the power button to wake up the screen. If gesture control is enabled in the app, you can also wake up the screen by turning your wrist.
- Shutdown: To shut down the watch, open the setting menu, click on System, then click on Shut Down.
Function Button:
- The function button on the watch can be used for various shortcuts and actions. Refer to the user manual for specific instructions on using the function button.
Settings Menu:
- You can customize the appearance of the menu by accessing the Settings menu.
- From the menu, select “Choose style” and choose between the “Four icons” or “List” view.
Clock Display:
- In clock mode, you can long press on the screen to select different clock interfaces.
Screen Lock:
- To enable screen lock, go to the app and select “Personal Centre” > “Device” > “Screen lock”. Set a password and turn on the screen lock to prevent unauthorized usage of the watch.
APP INSTALLATION:
- To install the Smart-Time Pro app, download it from the iOS App Store or Google Play store. Alternatively, you can scan the QR code provided in the user manual.
Pairing For Android:
- Ensure Bluetooth and GPS are enabled on your phone.
- Open the Hit Fit Pro app.
- From the home screen, press “Personal Centre” > “Device” to open the Searching Devices page.
- Press “More” to search for the watch.
- Select “Aura Smart Watch” to pair the watch.
- After successful pairing, the Bluetooth icon will appear in the watch’s status bar.
For iOS:
- For iOS systems, follow these steps:
- Ensure Bluetooth and GPS are enabled on your iPhone.
- Open the Hit Fit Pro app.
- From the home screen, press “Personal Centre” > “Device” to open the Searching Devices page.
- Press “More” to search for the watch.
- Select “Aura Smart Watch” to pair the watch.
- Note: During the pairing process, Hit Fit Pro may prompt you to enable GPS and Bluetooth and authorize access to GPS on your mobile phone.

FAQS

Q: Can I use a different charger for this watch?
- A: No, it is recommended to only use the charger supplied with this watch to ensure proper charging and avoid any damage to the device.
Q: How do I change the clock interface?
- A: In clock mode, long press on the screen and select a different clock interface from the options provided.
Q: How do I enable a screen lock on the watch?
- A: Open the app, go to “Personal Centre” > “Device” > “Screen lock”. Set a password and turn on the screen lock to prevent unauthorized usage.

SAFETY & WARNINGS

Read the contents of this user guide carefully to ensure that you can use this product correctly and safely.
Only use the strap provided with this product to prevent affecting the antenna signal of the watch, resulting in unclear calls and inability to locate and other problems.
The watch should be charged for 3 hours at least before use.

Maintenance

Non-professionals are not allowed to disassemble the watch and other accessories by themselves.
When the watch and accessories malfunction, contact help.Kogan.com for support
Do not use chemical solvents or detergents to clean this product.
Avoid dropping, knocking or vibrating the watch.
Rough handling of the watch will cause the screen to break and damage the internal circuit board and precision structure.
In case of abnormal phenomena during use, press and hold the power button until the watch is turned on.
To prolong the service life of the battery, keep the battery fully charged.
If the charged battery is left unused for a long time, the battery will gradually discharge by itself.
When not in use, place the watch in a cool, dry and dark place after charging.
When the strap is stained with sweat, dust, etc., wipe it clean with a dry soft cloth.
If the charging contacts are dirty, use a soft dry cloth to clean them and do not scratch them with hard metal objects.
When the watch strap is old and cracked, it must be replaced with a new one.
Before cleaning the watch, turn off the watch.
Do not clean the watch while charging.
Do not use heat such as a hair dryer to keep the watch dry.
Do not use mechanical tools such as pressurised air guns and washing machines to clean the watch.

Charging and Battery

Ensure the contacts are dry and free from dirt before charging.
Do not throw the watch into the fire, nor expose it to direct sunlight, fire or similar excessive heat to avoid battery leakage, overheating, bursting or fire.
There is a danger of explosion if the battery is incorrectly replaced.
During charging, the temperature of the battery will rise, do not place the watch together with flammable objects (such as bedside, clothing, and books, so as not to cause a fire.
The battery of this product is built into the watch.
It is strictly forbidden to disassemble, squeeze, heat or burn the battery.
It is strictly forbidden to use sharp objects, screwdrivers, etc. to touch or pry the battery.
The above operations may cause the battery to catch fire or burn.
Do not use or store this product in environments with high temperature, high pressure, humidity, strong static electricity and strong magnetic fields.
It is recommended to charge at a temperature above 5°C and below 35°C to avoid battery performance degradation.
The battery of this product is built into the watch.
It is strictly forbidden to disassemble, squeeze, heat or burn the battery.
It is strictly forbidden to use sharp objects, screwdrivers, etc. to touch or pry the battery.
The above operations may cause the battery to catch fire or burn.
Do not use or store this product in environments with high temperature, high pressure, humidity, strong static electricity and strong magnetic fields.
It is recommended to charge at a temperature above 5°C and below 35°C to avoid battery performance degradation.

Wearing the Watch

When wearing the watch, adjust the tightness of the strap.
It should not be too tight to allow the skin to breathe; it should not be too loose to prevent the watch from falling off or being damaged.
Avoid wearing the watch in the shower, otherwise the watch may be damaged.
If the sound becomes weaker after the watch is soaked in water, tap the water out of the speaker and the sound will return to normal.

Skin Allergies

Some people are susceptible to allergies and may feel uncomfortable when using wearable devices.
Pay special attention when wearing a watch.
If you feel discomfort, it may be caused by wearing it too tight for too long.
It is recommended that you adjust the tightness of the strap properly or wear it on the other hand.
If the skin around or in contact with the watch becomes red, swollen, itchy or has other symptoms of discomfort, stop using it immediately and consult a doctor.
If you need to replace the watch strap, contact help.Kogan.com. for support.
Discomfort may also be re-induced or increased if continued use after symptoms disappear.

Waterproof Performance

This watch should not be used for bathing, swimming, diving, water skiing and highspeed water flow or submerged in shallow water.
Water resistance is not a permanent condition and may decrease over time.

To ensure proper use of your watch, follow these tips:

Do not wear your watch while swimming, showering, sauna, sweating (or in a steam room) parking in hot springs, etc.
Avoid subjecting the watch to sudden temperature changes (such as blowing the watch with hot air from a hair dryer).
Avoid contact with high-speed running water, such as faucets, rafting, surfing and water skiing.
Avoid dropping or subjecting the watch to shocks, as the water resistance of the device may be impaired.
Avoid contact with solvents (white wine, medical alcohol, etc.), acidic substances, detergents, soapy water, perfume, spray insecticide, lotion, sunscreen, oil, hair dye or bubble water, etc.
Wipe off the product in time when sweat adheres to it for a long time.
After the watch meets water (such as washing hands). it is necessary to drain the accumulated water in the speaker and microphone holes or use it after drying thoroughly to avoid affecting the sound.

Medical

The measurement results of this product are for reference only and are not intended for any medical use or basis.
Always follow the doctor’s instructions.

OPERATION

Charging

Align the charging contacts of the watch with metallic contacts on the charging cable until the charging power indicator appears on the watch screen.
- Note: The watch needs to be charged to activate it when it is started for the first time.
- Note: Do not use any other charger other than the one supplied with this watch.

Operating the Watch

Power on: When the watch is powered off, press and hold the function button for 5 seconds to turn it on. The home screen of the watch will be displayed after booting.
Touch screen operation: From the home screen, swipe to the right of the menu screen, then tap the function icon to enter the corresponding sub-menu.
Wake-up screen: When the watch screen is off, you can press the power button to wake up the screen. If the gesture control is enabled in the APP, you can also wake up the screen by turning your wrist.
Shutdown: open the settings menu, click System Shut down, and click to shut down.

Removing the Strap

Remove the strap from the watch by sliding the quick release on the strap.

Shortcuts

Long press: The screen to change the home page thumbnail. Swipe left and right to view the different options, then touch the screen to confirm.
Swipe to the right: Daily activity, Games, Alarms, Sports, etc. Swipe up and down to navigate the list and tap a function to select.
Swipe down: Battery, Bluetooth, Time and shortcut icons.
Swipe up: Storage information.
Swipe to the left: Daily activity, Heart rate, Sleep, Weather (additional functions can be added to this interface).

Settings Menu

You can change the appearance of the Menu. From menu Setting Choose style Four icon or List.

Clock Display

When in in clock mode, long press on the screen and select a different clock interface.

Screen Lock

In the APP select Personal Centre Device Screen lock.
You can turn on the Screen lock after setting a password to prevent your children from overusing the watch. If the Screen lock is turned on, a password is required when using the watch.

APP INSTALLATION

Download the Smart-Time Pro App

Download the “Hit Fit Pro” app from the iOS App Store or the Google Play store, or by scanning the QR code below.

Pairing

Ensure Bluetooth and GPS are enabled on your phone.
Open the “Hit Fit Pro” App.
From the home screen, press the Personal Centre Device menu to open the Searching Devices page.
Press “More” to search for the watch, and select Aura Smart Watch to pair the watch as below.
- Note: In the “Setting” menu on the watch press System System version to check the watch’s Bluetooth name.
After pairing successfully, the icon will appear in the watch’s status bar.
- Note: If you want your watch to receive third-party notifications, you need to turn on the notification permissions.

iOS

For iOS systems, when prompted, you will need to agree to pair allow iPhone notifications.
Note: During the pairing process, “Hit Fit Pro” will prompt you to enable GPS and Bluetooth and authorise “Hit Fit Pro” to get access to the GPS on your mobile phone.

Synchronising Data

Pair your watch with the “Hit Fit Pro” App, open the app on the home page screen, and swipe down to synchronise data.
Your data will be shown on the App accordingly.

FUNCTIONS

Activity
Track daily calories, distance and steps.| **
---|---
Games
Play games on the watch. (Eat hot dogs, Jump, Racing car, Number Klots, Greedy Snake, Bubble Shooter Mania, 3-point Shooting). You can also download games through the ” Hit Fit Pro” App.| **
Alarm
Add, customise and delete up to 5 alarms.|
Sports
Track sports such as Walking, Running, Climbing, Riding, Basketball, Football, Baseball, Tennis, Rope skipping and Free sports.|
Sports Record
If you have done any sports and saved, in this function will show the information of the sports record.| **
Heart Rate
The watch will measure the user’s heart rate under the heart rate measurement interface. After the test is completed, the vibration will display the result. After no operation, the screen will automatically go out.|
Date & Time
You can set the time, set the date, and choose the time display mode.|
Sleep
Function introduction: The watch will display the user’s sleep time the night before. (Sleep measurement time 21:30 – 12:00 next day)
Swipe the main interface left and right, click sleep to switch to the sleep interface, and you can view the sleep time of the previous day.| **
Weather
After connecting with the APP, the watch will show local weather information.|
---|---
Blood Oxygen
Place the watch on your wrist to measure your real-time blood oxygen value.|
Message
When connected to Bluetooth, notifications from your phone will be sent to your watch. (You need to open the push switch in the app in advance)| **
Timer
Switch to the timer interface, and click to start timing. During the timing, you can start/pause/reset switching with a single touch.
Switch to the stopwatch interface, you can choose 1min, 5min, 10min or set any time you want to use the countdown function. You can start/pause/reset switching with a single touch.| **
Music
Play/pause
Next/previous track
Increase/decrease volume| **
Find phone
When the watch is connected to the APP, the phone will make a sound after tapping it.| **
Settings
Language
Choose style
Screen display
Do not disturb| Battery
Vibration
System| ****