motionics WiMER4D Wireless Measurement Read User Guide
- June 16, 2024
- motionics
Table of Contents
motionics WiMER4D Wireless Measurement Read
Product Information
Specifications
- Product name : WiMER4D
- Compatible protractor : Mitutoyo 950-318/PRO3600
- Compatible software:
- iOS: MultiGage Reader
- Android: MultiGage Reader
- Windows: MultiGage Reader (BLE Dongle Required)
Description
The WiMER4D is a wireless measurement device designed to be attached to the
Mitutoyo 950-318/PRO3600 protractor. It allows for accurate and convenient
measurements.
Included in the Box
- WiMER4D (1x)
- User Guide (1x)
Quick Start
- Attach the WiMER4D to the Mitutoyo 950-318/PRO3600 protractor.
- Turn on the protractor.
- If using a Windows PC, plug in the USB Bluetooth dongle.
- Run one of the compatible apps/software (MultiGage Reader)
- In the main page of the app/software, tap on the Scan/+ button to bring up a new pairing page.
- Select the WiMERXXXX device to connect. The connection may take a few seconds.
- Once paired, the instrument reading will show in the software.
Contact Information
- Motionics, LLC
- www.motionics.com
- 8500 Shoal Creek Blvd Building 4 Suite 209, Austin, TX, 78757
- info@motionics.com
- Made in the U.S.A
FAQ
-
Can I open the WiMER4D device?
No, opening the device will cause permanent damage and void the warranty. Do not attempt to open the device. -
Where can I download the compatible apps/software?
The iOS app can be directly downloaded from the App Store for free. The Android app can be directly downloaded from the Google Play Store for free. The Windows software is available on the Motionics website.
Wireless Measurement Read WiMER4D User Guide
Important Notes
- Detach the device from the protractor after use.
- Do NOT open the device. Opening causes permanent damage and voids the warranty.
Description
- 10-Pin Connector – connects to Mitutoyo 950-318/PRO3600 protractor
- Blue LED – turns on when device is connected to protractor
Included in the box
- WiMER4D 1X
- User Guide 1X
Compatible Software
- iOS: MultiGage Reader
- Android: MultiGage Reader
- Windows: MultiGage Reader (BLE Dongle Required)
- iOS app can be directly downloaded from the App Store for FREE.
- Android app can be directly downloaded from the Google Play Store for FREE. Windows software is available on Motionics website.
Quick Start
- Attach WiMER4D to the Mitutoyo 950-318/PRO3600 protractor, turn on protractor. Plug in USB Bluetooth dongle if using Windows PC.
- Run one of the aforementioned apps/software.
- In the main page, tap Scan/+ button to bring up a new pairing page.
- Wait for the software to finish scanning nearby devices, select WiMERXXXX to connect.
- Connection may take a few seconds, once paired, instrument reading shows in the software.
- Motionics, LLC www.motionics.com
- 8500 Shoal Creek Blvd Building 4 Suite 209, Austin, TX, 78757 © 2020 Motionics, LLC. All rights reserved.
- info@motionics.com
- Made in the U.S.A
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>