OLIMPIA SPLENDID B1018 Maestro Pro Inverter 12 HP Installation Guide
- June 16, 2024
- OLIMPIA SPLENDID
Table of Contents
B1018 Maestro Pro Inverter 12 HP
Installation Guide
B1018 Maestro Pro Inverter 12 HP
Technical Service Letter MAESTRO SMART 9 HP (Model # 02216)
B1018 – Maestro Wi-Fi kit installation
For Technical Support contact:
Removing the front cover
To remove the front cover from the unit start by removing the back shoulder
section by prying up to get access to the screws underneath. Remove the 2
screws one left and one right to remove the front shoulder piece.
Remove the bottom pull out tray and bar below supply air to get access to the
final 6 screws to remove the cover. 
Install B1018 Maestro Wi-Fi accessory board with two provided screws.
On the front unit, remove electrical compartment cover on the left-hand side.
To access control board.
Remove comm. Molex plug coming from the control board to the slot at bottom of
electrical compartment. 
Connect the grey comm. cable that is supplied with B1018 wi-fi board.
Route the cable up and around back of unit to accessory board.
Connect grey comm. cable to X3 slot labelled on/off. 
Reassemble unit, download the Maestro App from the app store for iPhone or
Android devices. And follow set up instructions.
For Technical Support contact:
Lucas Holler on
l.holleron@olimpiasplendidusa.com
800-408-5196 (ext. 103)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>