speechi ST-SUP-MOB-SIM-004 Montage Votre Support Mobile User Manual
- June 1, 2024
- Speechi
Table of Contents
USER MANUAL
ST-SUP-MOB-SIM-004
Material List
- To make sure we use the stand correctly and safely, please read this instruction carefully before installation.
- Apply to 55-105 inch IFP by suggestion.
- Max bearing weight is 100KG.
Other Accessories
(Unit:mm)
1| Screw| M8×25mm| 14pcs| |
---|---|---|---|---|---
2| Spring washer| Ø20×Ø13mm| 5pcs| | Including spare parts 1pc
3| Security bolts*| M6×130mm| 2pcs| |
4| Monkey wrench| | 1pc| |
5| Cross screwdriver (user’s owned)| 1| 1pc| |
Remark: Due to model difference,”*”indicates optional,please refer to actual
parts.
If the stand is equipped with “F, the quantity of is 14; If not, the quantity
is 10.
Assembly Step
Step 1: Adjust the casters into braking status, then screw them into the
stands (Figure1).
Step 2: Lock the wall mount
to the side of one stand (Figure 2).
Recommendation of using hole
| Apply to | Match the hole |
|---|---|
| 55″ | No.3 and 6 |
| 65″ – 70″ | No.2 and 5 |
| 75″ – 86″ – 105″ | No.1 and 4 |
Step 3: Lock the wall mount to the side of another stand (Figure 3).
Step 4: Lock the tray
between two upright stands (Figure 4).
Step 5: Install brackets with your screwdriver
(Figure 5).
Step 6: Hang the
monitor onto the stand, and tighten security bolts (Figure 6).
Make sure they are in brake status, this step needs 2 professional persons to
finsh.
Step 7: Refer to the
figure below for finshed assembly (Figure 7).
Remark! In some cases, the
assembled device couldn’t match the stand, you need to use your own specific
wall mount, please refer as below.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>