OLIMPIA SPLENDID Dolceclima Fresco 12AC and 15AC WiFi User Guide

June 3, 2024
OLIMPIA SPLENDID

OLIMPIA SPLENDID Dolceclima Fresco 12AC and 15AC WiFi User Guide
OLIMPIA SPLENDID Dolceclima Fresco 12AC and 15AC
WiFi

Install Smart Life Smart Living App for iOS or Android

iOS Devices

Smart Life – Smart Living

  1. Tap the  icon on your Apple device.
  2. Type Smart Life in the search window and search for the app.
  3. Tap INSTALL button. If asked, enter your Apple iTunes® password, and then tap OK to proceed.
  4. When the app is finished installing, an OPEN button is displayed on the screen.
    If you are ready to begin registration, tap OPEN to launch the app.

Android Devices

Smart Life – Smart Living

  1. Tap the Google Play icon on Android device.
  2.  Type Smart Life in the search window and search for the app.
  3. Tap the INSTALL button on Smart Life – Smart Living screen
  4. Tap the ACCEPT button on the App permissions screen.
  5. When the app is finished installing, an OPEN button is displayed on the screen.
    If you are ready to begin registration, tap OPEN and the app will start.

Register an account with Smart Living App

Make sure your mobile phone or tablet is connected to the internet before proceeding with user registration.

Open Smart Life – Smart Living App

  1. Click on “Sign Up”. (Fig. 1)
    Creating Account

  2. Enter your E-mail and then click on “Get Verification Code”.
    If the email with the code does not arrive, check your “Spam” folder in your mailbox.

  3. Enter the verification code sent to the email you previously used to register. If email still hasn’t arrived, click on “Didn’t get a code?” to resend. (Fig. 2)
    Creating Account

  4. Set your desired password.

Activate/reset WiFi function using FRESCO touch panel display

Connect the power cord of the appliance to the power socket; then turn on WiFi function for network configuration.

  1. Activate or reset the WiFi function by pressing & holding Fan/Wifi Mode (SW6) button for approximately 5 seconds until the LED (S10) starts to blink. (User’s Manual sec. 3.12)
    Display Setting

Follow step-by-step directions on the Smart Life App to connect to FRESCO for network setup.

Connecting FRESCO to your network using Smart Life App

Make sure your mobile device is connected to the same Wi-Fi network you want to use to connect the FRESCO portable AC.

Please connect using 2.4GHz network. To set router to 2.4GHz, please click on “Common router setting method” in the following step to select network and provide password.

  1. “Log-in” to the Smart Life app using previously setup email and password, then agree to Privacy Policy and User’s Agreement. (Fig. 3)
    Network Instruction

  2. Choose device to add in Smart Life App

  3. Click on “Add Device” or “+” in the top right-hand corner. (Fig. 4)
    Network Instruction

  4. Select “Large Home Appliances” then “Portable Air Conditioner (BLE+Wi-Fi)” (Fig. 5)
    Network Instruction

Connecting FRESCO to your network using Smart Life App

  1. Confirm that Wifi function LED (S10) is on and blinking rapidly.

If resetting is necessary, refer to step on previous page to perform a reset for the FRESCO.

  1. Click on “Confirm indicator is blinking rapidly”. (Fig. 6)
    Network Instruction

  2. Click on “Blink Quickly”. (Fig. 7)
    Network Instruction

  3. Confirm network and enter network password then “Next”. (Fig. 8)
    Network Instruction

When the FRESCO is connected to the WiFi network, the Wifi function LED (S10) stops blinking and remains switched ON steadily on the display

Alternate Method

If unable to add FRESCO to Smart Life App, follow directions below to connect using “Blink Slowly” option.
Do not cycle power by unplugging power cord from outlet.

  1. Reset Wifi function LED (S10) to blink slowly by pressing & holding Fan/Wifi Mode (SW6) button for approximately 5 seconds.
    Connection Instructions

  2. Click on “Confirm indicator is blinking rapidly”. (Fig. 9)
    Connection Instructions

  3. Click on “Blink Slowly”. (Fig. 10
    Connection Instructions

  4. Confirm network and enter network password then “Next”. (Fig. 11)
    Connection Instructions

  5. Click “Go to Connect” to be directed to mobile device’s Wifi settings. (Fig. 12)
    Connection Instructions

  6. Select FRESCO network name “Smartlife-XXXX” in mobile device Wifi settings.

  7. Select “Connect only this time” if prompted (Android only). (Fig. 13)
    Connection Instructions

  8. Return to Smart Life App to finish setup;

When the FRESCO is connected to the WiFi network, the Wifi function LED (S10) stops blinking and remains switched ON steadily on the display

For iOS Device

Click back to “ < Smart Life”.

Connection Instructions

For Android Device

  1. Click “ < Wi-Fi“ back button, then
  2. Click “ < Connections“ back button, then
  3. From open app screen select “Smart Life App”.
    Connection Instructions

Documents / Resources

| OLIMPIA SPLENDID Dolceclima Fresco 12AC and 15AC WiFi [pdf] User Guide
2261, 2261 AC, 2262, 2262 AC, Dolceclima Fresco 12AC and 15AC WiFi AC, Dolceclima Fresco AC, 12AC, 15AC, WiFi AC, AC, Dolceclima AC, Fresco AC
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

OLIMPIA SPLENDID User Manuals

Related Manuals