OLIMPIA SPLENDID 9239 Limpia Hero Wi-Fi Hero Instruction Manual

OLIMPIA SPLENDID 9239 Limpia Hero Wi-Fi Hero

Product Information

Specifications:

• Brand: LIMPIA HERO
• Model: Not specified
• Usage: Appliance for cleaning purposes
• Age Recommendation: 8 years and above
• Supervision: Required for children and individuals with reduced capabilities

Product Usage Instructions

Warnings and Safety Instructions:

• Children aged 8 years and above can use the appliance under supervision.
• Individuals with reduced capabilities should use the appliance under supervision.
• If the power cable is damaged, it must be replaced by qualified personnel.
• Always disconnect the plug from the power socket before performing maintenance.

General Usage Guidelines:

1. Ensure the appliance is suitable for the intended cleaning task.
2. Follow the specific instructions for each cleaning operation.
3. Store the appliance in a safe place away from children’s reach.
4. Regularly clean and maintain the appliance as per the user manual.

FAQ (Frequently Asked Questions):

• Q: Can children use the appliance unsupervised?
  A: No, children should always be supervised while using the appliance.

• Q: What should I do if the power cable is damaged?
  A: Contact the manufacturer or qualified personnel for cable replacement to avoid risks.

• Q: Is it safe to perform maintenance without unplugging the appliance?
  A: No, always disconnect the plug from the power socket before any maintenance operation to prevent electric shock hazards.

WARNINGS

1. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision. (be applicable for the European Countries).
2. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. (be applicable for other countries except the European Countries).
3. If the power cable is damaged, it must be replaced by the manufacturer or by its technical support service or by similarly qualified personnel, to prevent any risk to the user.
4. To prevent any electrocution risk, it is essential to disconnect the plug from the power socket before performing any maintenance operation on the appliance.

DISPOSAL

This symbol on the product or its packaging indicates that the appliance cannot be treated as normal domestic trash, but must be handed in at a collection point for recycling electric and electronic appliances. Your contribution to the correct disposal of this product protects the environment and the health of your fellow men. Health and the environment are endangered by incorrect disposal. Further information about the recycling of this product can be obtained from your local town hall, your refuse collection service, or in the store at which you bought the product. This regulation is valid only in EU member states.

ILLUSTRATIONS
The illustrations are grouped on the initial pages of the manual

GENERAL INFORMATION

First of all, we would like to thank you for choosing our appliance.

SYMBOLS
The pictograms in the next chapter provide the necessary information for correct, safe use of the machine in a rapid, unmistakable way.

Editorial pictograms

GENERAL WARNINGS
WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY PRECAUTIONS MUST ALWAYS BE FOLLOWED TO REDUCE RISKS OF FIRE, ELECTRIC SHOCKS AND INJURY, INCLUDING THE FOLLOWING

1. This document is restricted in use to the terms of the law and may not be copied or transferred to third parties without the express authorization of the manufacturer, OLIMPIA SPLENDID. Our machines are subject to change and some parts may appear different from the ones shown here, without this affecting the text of the manual in any way.

2. Read this manual carefully before performing any operation (installation, maintenance, use), and follow the instructions contained in each chapter.

3. Keep the manual carefully for future reference.

4. To reduce the risk of severe burns, keep this product out of the reach of children and pets.

5. After removing the packaging, check that the appliance is in perfect condition. The packaging materials must not be left within reach of children as they can be dangerous.

6. Disassembly, repair or remodeling by an unauthorized person may result in serious harm and will void the manufacturer’s warranty.

7. Do not operate the appliance in case of a damaged cord or plug, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Return the appliance to the manufacturer for examination, electrical or mechanical adjustment, or repair.

8. Always place this humidifier on a firm, flat and level surface at least 60cm from the floor. This humidifier may not work properly on an uneven surface.

9. Do not clog the air inlet or outlet, do not position the unit on cloth, mats or any other absorbing material or any other absorbing material.

10. Do not permit the area around the humidifier to become damp. If dampness occurs, turn the output of the humidifier down. If the humidifier output volume cannot be turned down, use the humidifier intermittently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp.

11. Do not place humidifier near heat sources such as stoves, radiators and heaters.

12. Do not place humidifier near electrical outlet.

13. This product releases mist. Do not place this humidifier directly on wood furniture, flooring or any surfaces that could be damaged by water. Manufacturer does not accept any liability for damage in the case of the unit being placed incorrectly.

14. Unplug the appliance during filling and cleaning.

15. Once the humidifier has been plugged in, do not tilt or move the unit.

16. Do not remove the water tank from the unit while it is on.

17. Do not handle the plug with wet hands.

18. Do not excessively bend, twist, pull or damage the power cord.

19. Avoid placing this product where the humidity spout is pointed directly at an object or person.

20. Do not inhale the mist/vapor expelled from the product or drink water from the tank.

21. Do not fill the water tank with hot or boiling water.

22. Do not use this product in direct sunlight or near a heat source such as a stove, heater or radiator.

23. If the water tank becomes cracked or damaged, do not use.

24. Do not keep this product running for an extended period of time.

25. Unplug the cord when unit is not in use for an extended period of time and/or when no one is home.

26. Do not keep water in the tank when not in use for an extended period of time.

27. Do not clean the unit, water tank or water reservoir with detergents or chemicals of any kind.

28. The use of water additives including ethereal/essential oils, fragrances, eucalyptus, water conditioners, etc. will damage the appliance materials and as a consequence the whole unit. Any use of such additives will void the manufactures warranty.

29. Do not use this product near any other electronic device.

30. Do not cover the spray spout at any time during use. Do not put anything on or in the tank.

31. When unplugging from outlet hold humidifier securely.

32. Do not place cord over objects.

33. Do not get water in or on the power cord or where it connects to the product.
    Do not use near a sink.

34. Do not touch the water tank during operation.

35. Do not submerse the unit in water or pour water on the unit or in the humidity spout.

36. When emptying water from water tank, pour on drain side.

37. Do not cover the spout with cloth or hand and do not use without the spout.

38. Use clean or distilled water in tank. Hard water areas will require more frequent cleaning.

39. If moisture forms on the walls or windows of the room, turn off the humidifier.
    The room already has plenty of humidity and additional moisture may cause damage.

40. NEVER leave water in the reservoir when the appliance is not in use.

41. Empty and clean the humidifier before storage.

42. Clean the humidifier before next use.

43. Be aware that high humidity levels may encourage the growth of biological organisms in the environment.

44. Micro-organisms that may be present in the water or in the environment where the appliance is used or stored, can grow in the water reservoir and be blown in the air causing very serious health risks when the water is not renewed and the tank is not cleaned properly every 3 days. Clean the water tank every three days.

45. FOR HOUSEHOLD USE ONLY.

This product must be used exclusively according to the specifications indicated in this manual. Use different to that specified, could cause serious injuries. THE MANUFACTURER IS NOT LIABLE FOR INJURY/DAMAGE TO PERSONS/OBJECTS DERIVING FROM FAILURE TO COMPLY WITH THE REGULATIONS CONTAINED IN THIS MANUAL.

MAIN CHARACTERISTICS

1. Mist outlet
2. Lid
3. Water tank
4. Power cord
5. Body
6. Display and control panel
7. Flavor compartment
8. Led light
9. Float
10. Brush
11. Thermal protection
12. Purifier filter

PRE-OPERATING INSTRUCTION

POSITIONING (Fig.1)

Select a firm, level, flat location at least 15cm from any wall or object for proper air flow. Place the humidifier on a water-resistant surface, as water can damage furniture and some flooring. Do not place unit directly on carpet, towels, blankets or other absorbent surfaces.
We will not accept responsibility for damage caused by water spillage.

FILLING

Before filling the tank, always make sure that the appliance is disconnected from the power socket.

• Separate the tank (3) from the base of the unit (5) as shown in fig 2.

• Raise the lid (2).

• Pour drinkable water directly into the tank paying attention not to exceed the “MAX” filling level (Fig.3).
  Do not pour flavours or other additives inside the tank. Use the specific compartment (7).

• Close the lid (2) (Fig.4).
  Do not use the humidifier without water inside the tank.

Flavour compartment (7)
Press the flavour compartment (7) and extract it from its seat; make sure to wet the white filter (7a) with the desired essential oil. Reposition the flavour compartment (7) in its seat and press until locking (fig.5).

INSTRUCTIONS FOR USE

USE OF THE APPLIANCE
Preliminary operations

• Before connecting the plug into the power socket , make sure the network data correspond to what is indicated on the nameplate of the appliance.
• Insert the plug into the power socket; the keys of the control panel light up for a few seconds, then the appliance sets itself to stand-by mode.

DISPLAY AND CONTROL PANEL

• A1. ON/OFF key
• A2. Timer key
• A3. Humidifier key
• A4. Plasma key
• A5. Mist key
• A6. Mist emission key
• A7. Mode key
• A8. Children lock key
• L1. Display
• L2. Humidifier mode LED
• L3. Plasma mode LED
• L4. Mist LED
• L5. Mist emission intensity LED
• L6. Children mode LED
• L7. Automatic mode LED
• L8. Sleep mode LED
• L9. WiFi LED
• L10. Controls lock mode LED

OPERATION

ON/OFF key (A1)

• In stand-by mode, all the keys are disabled, except for the ON/OFF key.
• Press the key (A1) to switch the appliance on/off.
• Dispensing of the mist is set to “Medium” by default (Led L5 “II” on); visualization of the ambient temperature alternates with the visualization of the percentage of detected humidity on the display (L1). All the functions are available.
• When the appliance is switched on again, without disconnecting it from the power socket, it memorizes the last active settings (except for the Sleep, Timer and Children lock functions).

Timer key (A2)

• Press the key (A2) to activate this function; press the key (A2) several times to set the desired time according to this sequence: (0h (Timer off) –> 1h –> 2h –> .. 11h –> 12h –> .. 0h (Timer off) –> ..).
• The set value flashes on the display (L1) three times before returning to display alternatively the ambient temperature and the percentage of humidity detected. When the function is active, the display (L1) shows the ambient temperature, the percentage of detected humidity and the set timer value alternatively.
• Press the button (A2) once to display the remaining time, press the key a second time to reset the timer

Humidifier key (A3)

• Press the key (A3) to increase/decrease the percentage of desired humidity; on the display, the set value flashes on the display (L1) three times before returning to display alternatively the ambient temperature and the percentage of detected humidity.
• The settable value is included between 40% and 80% (with 5% steps).
• When the detected humidity is lower than the set value, the appliance starts to dispense mist.
• When the detected humidity is higher than the set value, the appliance stops dispensing mist.

Plasma key (A4)

• Press the key (A4) to activate the function; the corresponding LED (L3) switches on.
• This function generates ions which neutralize the positive and negative charges in the air, disassembling the pollutants and making them harmless, reducing the bacteria and removing fume, dust and smell.
• Press the key (A4) a second time to deactivate the function.

Mist key (A5)

Press the key (A5) to activate the warm mist dispensing function; the corresponding LED v(L4) lights up red.
Press the key (A5) a second time to deactivate the function.

Temperature unit of measurement setting
Keep the key (A5) pressed for 5 seconds to change the unit of measurement of temperature from °C (Celsius) to F (Fahrenheit).

Mist emission key (A6)
Press the key (A6) to select the emission level of mist according to this sequence:

The LED (L5) corresponding to the desired level of emission lights up on the display.

Mode key (A7)
Press the key (A7) several times to select the desired mode.

Automatic mode

• In this mode, the appliance automatically keeps humidity constant at 55% and the mist emission level is adjusted based on the detected humidity; the corresponding LED (L7) lights up. The plasma function signalled by the respective LED (L3) is active.
• When the detected humidity is lower than 45%, the mist emission level is adjusted to “High (III)”.
• When the detected humidity is higher than 55%, the appliance stops supplying mist.
• When the detected humidity is lower than 10° C, the appliance starts to supply warm mist, LED (L4) red.

Children mode

• In this mode, the appliance automatically keeps humidity constant at 55% and the mist emission level is adjusted based on the detected humidity; the corresponding LED (L6) lights up.
• When the detected humidity is lower than 45%, the mist emission level is adjusted to “High (III)”.
• When the detected humidity is higher than 55%, the appliance stops supplying mist.
• In this mode, the plasma function and the warm mist dispensing function are deactivated.

Sleep mode
In this mode, the appliance automatically keeps the mist emission level set to “Low (I)” and all the lights remain off; the respective LED (L8) lights up.

Manual mode
In this mode, the mist emission level, the dispensing of mist or warm mist and the activation/deactivation of the lights are set manually.

Control lock (A8)

• Press the key (A8) for a few seconds to activate the control lock function; the respective LED (L10) lights up; when the function is activate, all the other keys are disabled.
• Press the key (A8) for a few seconds to deactivate the function.

OTHER FUNCTIONS

LED light
Press the key (A7) for a few seconds to activate/deactivate the LED light (8). When the function is active, the light varies between 7 shades of colour.

WIFI function

• When switched on, the appliance enters the device search mode and the LED (L9) flashes.
• In case it is desired to activate the function in a second step, keep the key (A1) pressed for a few seconds until the LED (L9) starts to flash.
• When the appliance connects with the smartphone, the LED (L9) stops flashing and remains steady on on the display.
• Frame the QR code to download the instructions for connection to the WiFi network and for use of the App.
• If the appliance does not connect within 2 minutes, the LED (L9) stops flashing.

Absence of water
The appliance stops working without water inside the tank, the LED (L2) lights up red and switches off automatically after 10 seconds; the appliance enters stand-by mode.

MAINTENANCE AND CLEANING

Before proceeding with any maintenance and cleaning intervention, always make sure you disconnect the power plug from the power socket.

• Use a dry cloth to clean the appliance.
• If the appliance is very dirty, it is possible to use a cloth dampened with warm water (max 50°C) and a mild detergent to clean its external parts. Dry with a dry cloth.
• Remove the tank and empty all water from unit bowl and tank (Fig.6).
• Locate the ultrasonic disk on the inside centre of the base unit; ONLY use a soft paintbrush to delicately clean the disk and remove accumulations and deposits.

Do not scrub or scrape the ultrasonic disk.

• Make sure the appliance is completely dry before reconnecting the plug to the power socket.
• Do not use a chemically treated or antistatic cloth to clean the appliance.
• Do not use petrol, solvents, polishing pastes or similar. These products could break or deform the plastic surface.
• Do not use oils, chemical substances or abrasive products to clean the appliance.
• Neither wash nor immerse the appliance with/in water.
• Remove the thermal protection (11) and clean the inside of the appliance body (5); when the inside of the appliance has been cleaned, make sure to correctly reposition the protection and check that no water residues remained in the various components (Fig.7).
• Remove the filter (4) and rinse it under running water. Make sure the filter (4) is completely dry and reposition it inside the appliance (Fig.8).

In case of an appliance malfunction, do not try to disassemble it but instead refer to the retailer or to the technical assistance service.

If calcium becomes difficult to remove with a paintbrush:

• Fill the tank with a mix of 1 spoon of white vinegar and 1 spoon of water.
• Let the solution stand for 5 minutes.
• With the vinegar inside the tank, clean all the internal surfaces with a soft cloth or a brush to help remove limescale.
• Also check mist nozzle and mist tube in water tank. Clean as needed.
• Rinse the Base thoroughly with water to remove scale and vinegar solution.

END-OF-SEASON STORAGE

• Follow the Cleaning and Descaling instructions when the humidifier will be stored at the end of the season.
• Dry the humidifier completely before storing. DO NOT store with water inside the bowl or Water Tank.
• Pack the unit in its original carton and store in a cool, dry location.

If you experience a problem do not attempt to open the motor housing yourself. doing so may void your warranty and cause damage to the humidifier or personal injury.

TROUBLESHOOTING GUIDE

try again.

•     Power Failure: When the power is returned, try again.

•     Tank Installation: Make sure the tank is correctly attached.

•     The surface of the ultrasonic disk is dirty: Clean ultrasonic disk.

Air blows but water vapor is not produced.| •     Excessive Water: Remove a certain amount of water from the tank.

•     Detergent residue and/or oil ingredients from cosmetics, etc may be in tank; wash out tank and try again.

•     The surface of the ultrasonic disk is dirty: Clean ultrasonic disk.

•     If you use hard water, replace with softer water.

Humidity level is low.| •     The surface of the ultrasonic disk is dirty: Clean ultrasonic disk.

•     The water in the unit is too cold: Replace with cool, but not cold water.

The humidity has a bad smell.| •     Poor maintenance or dirty water: Clean the product thoroughly, and fill it with fresh

water.

White dust is forming on nearby furniture.| •     Hard water may deposit a certain of dust. Dust in the air also settles because of added humidity in the room. Use distilled water if this becomes a nuisance.
Unit has stopped working.| •     No or low water. Unplug unit and refill tank.
Water is accumulating outside of unit or area surrounding unit.| • Saturation of humidity. Lower mist control setting.

•     Unit not level and water is accumulating. Unplug and place on level surface. Point spray away from objects. Raise unit on a water-resistant level surface at least 60 cm from the floor.

Water dripping when refilling.| •     Water remaining on bottom of tank. Wipe tank or tilt to drain before transporting.
Increased noise level.| •     Unit must be placed on a flat, level, hard surface. Make sure it is NOT placed on a soft

or absorbent surface.

Flashing light symbols.| •     Indicates low water. Unplug and refill tank.

OLIMPIA SPLENDID spa via Industriale 1/3 25060 Cellatica (BS)
www.olimpiasplendid.it
info@olimpiasplendid.it

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>