AOLION AL-NS228 Wireless Controller User Manual

Switch Wireless Controller
AL-NS2286

Product profile

• Applicable platform: Switch mode, PC wired mode, Android HID mode, 105 Apple MFI mode (13.3 version or above);
• Hall linear trigger;
• 2 back macro programming keys, with a key to close / open the programming key switch.
•  High-capacity battery cell;
• Cool RGB atmosphere light, can be combined by the key “off / on” atmosphere light;
•  XBOX hand grip, grip with non-slip lines;
• Asymmetric vibration motor, 3 gear adjustment: weak, medium, strong;
•  With one key Turbo repeating button; 3 repeating speed gear adjustment: slow- – -middle- – – -fast.
•  Exquisite appearance pattern;
•  XBOX hand grip, grip design with non-slip lines;

Product schematic diagram

Platform connection mode:

• Support connection mode: Switch mode, PC cable mode, Android HID mode, lOS Apple MFI mode (13.3 version and above).

•  Switch pattern:
  1  shutdown state, long press the Home button for 5 seconds, 1-4 channel indicator light flash, enter the Bluetooth pairing.
  2 Automatic identification of the matching Switch host successful success, the corresponding channel indicator (LED light) often on.

•  PC pattern:
  Connection: Use USB_Typec cable to connect to PC.
  Connect indicator: 1 and 4 channels in Xbox 360 mode; 2 and 3 channels in D-input mode Light slow flash.
  PC connection mode is Xbox 360 mode (X-input); press “-key” + “+ key” for 6 seconds,Contable to D-input mode.

• Android HID mode (mobile phone, tablet):
  Pairing: 1 In shutdown state, long press combination A + Home for 5 seconds, 2 and 3 channel indicators flash to enter Bluetooth pairing.
  2 Open the mobile phone Bluetooth search handle name “Gamepad” for pairing, after successful connection, 2 and 3 channels indicate
  The light is often bright.

• Apple MFI mode (IOS system mobile phone, tablet):
  Pairing: 1 In the shutdown state, long press the combination X + Home key for 5 seconds, and the 1 and 4 channel indicators flash to enter the Bluetooth pairing.
  2  Open the mobile phone Bluetooth search handle name “Xbox wireless Controller® for pairing, successful connection after 1 and
  The 4-channel indicator light is always on.

•  Remarks:
  If the Bluetooth pairing connection is not successful, the Bluetooth pairing mode will be automatically turned off after about 2 minutes and 30 seconds.

Atmosphere RGB indicator lamp

•  RGB lamp effect mode switch:
  1 “-Key” + “Cross Key” to adjust the light “phantom color” mode.
  2 “-Key” + “Cross key” to adjust the “constant light” mode.
  In “constant bright” mode, the lamp effect adjustment:
  1 “-Key” + “Cross key left” is the positive adjustment light color.
  2  “-Key” + “Cross key right” is the reverse adjustment of light color.

• 3D rocker RGB lamp:
  1 Press the combination key “-key” + “+ key” + “A key” to turn off the RGB light.
  2 Press the combination key “-key” + “+ key” + “A key” to turn on the RGB light again.

• RGB lamp effect color:

•  Magic color: magic color.(give tacit consent to)

• Chang Liang: white-yellow-green-green-blue-blue-purple-red.
  Controller boot and return connection instruction
  

• Press the HOME button to start the wake up controller; enter the return search mode (back to the last used device), and the corresponding channel indicator light is always on.

•  Press the HOME button to start the wake up handle and automatically connect with the last paired host. If 10 seconds connection fails, it will automatically sleep.

• Home key is set to wake up handle function; other keys have no wake up function.

•  If the handle fails to reconnect, you should choose to pair up and connect with the host again.
  Controller wake up the Switch host description

•  Switch When the host enters the sleep mode, press the handle Home button to start up, and the handle can automatically wake up the boot Switch host machine.

Remarks:

•  Use the last gamepad to pair with the host has been successfully connected and enter the sleep, can use the gamepad Home key to wake up the host function.
•  If the controller fails to wake up the Switch host, please choose to wake up the host manually.

Macro definition programming instructions:

■ Macro definition programming key on / off description

• 1 Turn the programming key switch of the handle back key to “ON” and open the programming key function; dial the programming key switch to OFF is off and the programming key is off.
• 2 Programming key factory default function key: M1 is the cross direction key “left key”; M2 is the cross direction key “right key”.
• 3 Function keys can be set: A, B, X, V, RB, LB, RT, LT, R3 (right 3D), L3 (left 3D), cross, +,

■ Macro definition programming key ingle key function setting step:

• 1 Press the programming setting key, the channel indicator light LED2, LED3 lights on, enter the macro definition programming function;
• 2 Press the M1 or M2 key, the channel indicator light becomes LED2 bright, indicating that the M1 or M2 key has been selected, The ending setting function key;
• 3 After pressing the function key to be mapped, then press the M1 / M2 key or the programming setting key to exit the programming setting mode, the LED light restores the channel indicator status, and the single key programming setting is successful.

■ Programming key macro defines multiple function key setting steps

• 1 Press the programming setting key, the first indicator LED2, LED3 lights on, enter the macro definition programming function;
  2 Press the M1 or M2 programming key, the channel indicator light

• becomes LED2 bright, indicating that the M1 or M2 programming key has been selected, Select multiple function keys to set up;
  3 Press for the first function Key + 2nd function key + 3rd

• function key + N function keys (note: between the two function keys is after press the function key time mapping, set the user can define the trigger interval between the two function keys), then press the M1 / M2 key or programming setting key, exit the programming setting mode, LED light restore the channel indicator status, multi-key macro definition function set success.

• Remarks:M1 and M2 macro define programming keys, one programming map at least 21 function keys, the same key function can be repeated programming.

■ Clear the M1 or M2 programming key function

• 1 Single programming key clearance function: press the programming setting key, channel indicator LED2, LED3 light on, press the programming key to be cleared, and then press the programming setting key, the programming key is cleared successfully.
• 2 Clear all programming key function: long press the program- ming setting key for 5 seconds, the channel indicator light 4 lights all flash, clear all programming key functions, restore the default function of the factory.

■ Programming back key one-button switch function

• Program the switch to turn on the back key when you dial to OFF.
  Turbo key setting
  Press the function key + T key, and the function key enters the Turbo repeating function gw Turbo setup steps

• 1 Press the function key + T key, the function key into the semi-automatic continuous issuing function;

• 2 Press the function key + T key, the function key into the automatic continuous continuous function;

• 3 Press the function key + T key, and the function key Turbo repeating function is cancelled;

■  Gear adjustment mode

• combine the key Turbo key + “+ key or-key” to adjust the gear position. Turbo can be set: slow- – -middle- – – -fast a total of three gears, 8 times / second for slow gear, 16 times / second for middle gear, 21 times / second for fast gear.

■ Clear all Turbo functions

• long press the T key for 5 seconds, cancel all function key repeating function;
• Remarks :
  Function keys can be set: A, B, X, Y, RB, LB, RT, LT, R3 (right 3D down), L3 key (left 3D down press key), cross direction key;

Motor vibration setting

• Vibration 3 gear setting: strong, medium, weak;

• Default settings: i

• Vibration setting method: T key + left 3D joystick (push up or push down) to adjust the vibration, order: in- – – -strong- – – -weak.
  Controller charging indicator light and charging characteristics

• ■ If the handle is turned off when charging: LED indicator “1-4” full

• light at the same time slow flash, fully charged LED lights off.

• ■ if the handle is connected to the host when charging in use: the currently connected channel LED indicator flashes slowly, and the channel indicator is often on after full charge.
  ■ When charging, pairing connection, return connection and low power alarm, the LED indicator status of pairing connection and return connection is given indicated.
  Controller shutdown and automatic dormancy

• Close the handle (shutdown): Long press the HOME key for 5 seconds to Bluetooth connect and enter the dormant shutdown state.

• Switch The host screen is closed or shut down, and the handle is automatically disconnected and enters the dormant shutdown state.

• Within 5 minutes, the handle without any button press, shake the 3D joystick, shake the handle, the handle will automatically enter the dormant shutdown state.

Battery low power alarm

• Low battery power alarm: if the handle battery power is less than 30% power, the atmosphere RGB light flashes.
• Battery low power alarm: if the handle battery power is less than 20% power, the atmosphere RGB light turns off the light, and the current connection channel LED refers to it The lamp flashes quickly.
• When the battery is low power alarm, charge the handle in time.

Standby loss and standby time:

• During shutdown dormancy, the loss current is less than 15 UA.
  Standby time is greater than 90 days.
  Default function chart

supports a wired connection
ABXY key| have|
Key / + key| have|
The LB key / RB key| have|
The LT key / RT key| have| Hall linear trigger
HOME key| have| Bring wake up function
Screen button function| have|
Cross direction key| have|
Turbo key| have| Support: semi-automatic and
automatic continuous series function
Vibration adjustment key| have| Support for strong,medium and weak regulation
Left3Dtick(left3Dfunction)| have|
Left 3D rocker (press down L3 key function)| have|
Right 3D tick (right 3Dfunction)| have|
Right 3D rocker (down R 3 keyfunction)| have|
Macro defines programming keys| have| There are 2 programming back keys
Connect the indicator light| have| white light
Motor yibration function| have| The hammer vibration
NFC read and write function| have|

lectrical characteristics:

| Electrical characteristics of products
---|---
Order number| Project| Technical parameter| unit| Remarks
1| Rated input chargingvoltage| 5V| V|
2| charging current| 400mA| mA|
3| Dormant standbyloss current| 15| uA|
4| Working rated loss current| 45mA| mA| Turn off the RGB atmosphere lights
S| Work duration| 22 Hours| H| 1, Turn off the RG8 atmosphere lights.
2, 1000mAh/ 3.7V Battery.
6| battery capacity| 1000mAh/3.7v| |
7| 3D joker return| Wired SOOHz;wireless 125Hz| |
8| The 3D rocker error rate| Less than 0.2%| |
9| The 3D rocker adsorption| No adsorption|
| Description of the power consumption
used by the RGB atmosphere tamp
---|---
Order number| Project| qualification| unit| remarks
1| close| 45mA| 22 Hours| w-Key’ + “.. key’ • ‘A key” can turn off the RGB light
2| Magic color RGB light /purple| 200mA| 5 Hours|
3| white| 330mA| 3 Hours|
4| Green yellow / cyan| 240mA| 4 Hours|
5| Red / green /blue| 140mA| 7 Hours|

Environmental conditions

Notes

• This product is not in use.
• This product can not be used or stored in a wet environment.
• This product in use or storage, should try to avoid dust, pressure, so as not to affect the service
• This product is caused by flooding, damaged or broken, electrical performance problems, please stop
• Do not use the microwave oven and other external heating equipment to dry
• If there is any damage, please send it to the maintenance department in time. Do not remove it by yourself.
• Don’t play with this product for children

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance Ocm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>