UNITEK uHUB Q4 Next Ultra Slim 4 in 1 USB-C Hub User Manual
- June 16, 2024
- UNITEK
Table of Contents
UNITEK uHUB Q4 Next Ultra Slim 4 in 1 USB-C Hub
Product Information
Specifications:
- Cable Length: 15cm
- USB-C Full-Featured Connector
- LED Indicator: USB-C Data (5Gbps), USB-A Data (5Gbps)
Product Overview:
The uHUB Q4 Next is an ultra-slim 4-in-1 USB-C hub that provides convenience
and versatility in expanding your connectivity options. With its USB-C and
USB-A ports, it supports SuperSpeed 5Gbps data transfer. The hub features a
cable length of 15cm and an LED indicator to show the status of USB-C and
USB-A data transfer.
Safety Notes:
Please read and follow the safety notes below to ensure proper and safe use
of the product:
UNITEK assumes no liability and provides no warranty for damage resulting from
improper installation/mounting, improper use of the product, or failure to
observe the operating instructions and/or safety notes.
Technical Data Compatibility:
The uHUB Q4 Next is compatible with the following systems:
- Windows XP or later version
- Mac OS X or later version
- Linux
USB Specification:
The USB specification supported by the uHUB Q4 Next is USB 5Gbps.
Note:
During data transfer, it is important not to unplug the hub from the PC under
any circumstance as it may result in data loss.
Service and Support:
For further support information, please visit our website at www.unitek-
products.com or contact our support team via
email at support@unitek-products.com.
Disposal Information:
The crossed-out trash can sign on the product indicates that it should not be
disposed of with other waste. Please follow the information prepared by the
local government and dispose of the product in special containers.
Product Usage Instructions
Step 1: Connect the uHUB Q4 Next to your device:
- Ensure that your device is powered off.
- Locate the USB-C port on your device.
- Insert the USB-C Full-Featured Connector of the uHUB Q4 Next into the USB-C port of your device.
Step 2: Connect additional devices:
- Identify the USB-A ports on the uHUB Q4 Next.
- Insert the USB cables of your additional devices into the available USB-A ports.
Step 3: Power on your device:
- Once all devices are connected, power on your device.
Step 4: Check LED indicator:
- Observe the LED indicator on the uHUB Q4 Next.
- A solid LED light indicates that the USB-C and USB-A data transfer is active.
Step 5: Data transfer:
- You can now start transferring data between your device and the connected devices through the uHUB Q4 Next.
- Ensure not to unplug the hub from the PC during data transfer to avoid data loss.
Step 6: Disconnecting the uHUB Q4 Next:
- Before disconnecting the uHUB Q4 Next, ensure that all data transfers are complete and your device is powered off.
- Gently remove the USB-C Full-Featured Connector from the USB-C port of your device.
- Disconnect the USB cables of your additional devices from the USB-A ports of the uHUB Q4 Next.
Step 7: Store the uHUB Q4 Next:
- After use, store the uHUB Q4 Next in a safe and dry place.
- Avoid exposing it to extreme temperatures or humidity.
FAQ (Frequently Asked Questions)
-
Q: Can I unplug the hub from the PC during data transfer?
No, it is not recommended to unplug the hub from the PC during data transfer as it may result in data loss. -
Q: What is the warranty for the uHUB Q4 Next?
Please refer to our warranty disclaimer for detailed information on the warranty coverage and limitations. -
Q: Where can I find further support information?
You can visit our website at www.unitek-products.com or contact our support team via email at support@unitek- products.com for further support information.
Product Overview
- Cable Length: 15cm
Package Contents
- uHUB Q4 Next
- User Manual
Safety Notes
- Do not attempt to service or repair the product yourself. Leave any service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep this product, like all electrical products, out of the reach of children!
Warranty Disclaimer
UNITEK assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or failure to observe the operating instructions and/or safety notes.
Technical Data
- Compatibility USB-C port
- Systems Supported (PC, Laptop & Tablet)
- Windows XP or later ver.
- Mac OS X or later ver.
- Linux
- USB Specification USB 5Gbps
Note
The hub may not be unplugged from the PC during data transfer under any
circumstance. Data may be lost.
Service and Support
- Further support information can be found here: www.unitek-products.com.
- Email: support@unitek-products.com.
The crossed-out trash can sign means that the equipment must not be disposed of with other waste. It should be disposed of in special containers according to the information prepared by the local government.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>