PANDUIT QPPNS6 QuickNet Loose Plug Pack User Guide

PANDUIT QPPNS6 QuickNet Loose Plug Pack User Guide

Connection

QPPNS6 QPPNJ6 Patch Cord removal:
Press small flat head screwdriver on areas shown with arrows to compress latches, gently remove cord.

Accessories

Low Profile Plug Pack Install into Cisco 9400 Switch

To install Low Profile Plug Pack into jack ports above the switch ejection lever, rotate the ejection lever to an “open” position.

NOTE: Ejection lever will stop prior to removing the switch blade.

Insert Low Profile Plug Pack.

When installation is complete, close the ejection levers.

For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp

For Technical Support: www.panduit.com/resources/install_maintain.asp

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>