Joom S-Y608 Electric Baby Rocking Chair User Manual
- June 16, 2024
- JOOM
Table of Contents
Joom S-Y608 Electric Baby Rocking Chair
Warning
- Children must wear seat belts when they are on this rocking chair (this product).
- Do not leave the child alone in the rocking chair, an adult should be there to supervise.
- The rocking chair should be used on a stable and non-sloping ground, not on a table or other height.
- Pay attention to the choking hazard: when the child is in the rocking chair, please keep his face up to prevent the danger of room suffocation.
- Please do not use the rocking chair on soft objects to prevent injury after overturning (such as bed, sofa, etc.)
- Do not let the child climb out of the rocking chair seat to prevent hidden accidents such as falling, being entangled by the seat belt or strangling.
- Do not move the rocking chair when the child is in the rocking chair.
- Do not let children use this product as a toy.
- This product must be assembled by adults. When assembling and disassembling, check whether the parts are damaged.
- Do not use or store the rocking chair near the fire source.
Cleaning and maintenance
- Soft parts such as cloth covers are gently rinsed with warm water below 40 degrees.
- Plastics, iron pipes, etc. cannot be washed with water, pay attention to moisture-proof and waterproof
General Troubleshooting
-
Fault 1: There Is no response when starting up, no Indicator light Is on, and no swing Check method:
-
Check whether the power is turned on. Under normal circu.instance, there will be an indicator light on the button panel flashing when the power is just turned on.
-
If the indicator light is not on and there is no response when the power is turned on, first check whether the socket is powered on, and you can use other sockets to test
-
The second is to check the power adapter, you can use the mobile phone
-
Check whether the power cord or power socket is plugged in properly
-
Fault2: The Indicator light Is on when the machine Is turned on, but It cannot swing normally: no swing, the swing amplitude Is small, and It will stop when swinging Check method:
-
Check whether the locking pin is locked, please (refer to the manual) to open the pin.
there is no heavy object on the seal, the rocking chair may not be. able to swing normally. You can place a weight of about 3-10 kg to test the rocking function. You cannot place a tesl object the. at is too large beyond the seat range. -
Do not cover too much quilt beyond the seat range during u.1e. if it exceeds. the rocking chair will not be able to swing Connally
No obstacles should be encountered outside the seat. Any items: such as quilts and mosquito nets on the seat should not touch the ground or other objects. Even small objects; or small external forces will prevent the rocking chair from swinging. -
Fault 3: The remote control does not work or the response is not sensitive Check the method
-
When using the remote control for the first time. you need to remove the battery insulation mm (refer to the raw, I).
-
In some areas due to logistics restrictions, if the remote control does not have batteries installed, please purchase 1-e a 2025 button battery for installation
-
If the power of the remote control is insufficient, you need to replace the 2025 button battery
-
The ren1ote control signal will be wealr when the remote control is \JS.Cd in an open or strong light place. At this time, the remote control will be better when it is close to and aimed at the rocking chair for remote control.
User’s manual
Thank you for using our products!
Electric baby rocking chair Model number S-Y608
Reminder : Please read this instruction manual carefully before using this product, and keep it for future reference.
Installation and use method
-
Connect the two parts of the iron pipe (Picture I).
-
Put the iron pipe into the cloth cover and zip it up (Picture 2).
-
Connect the iron pipes of the base (Picture 3).
-
The seat is connected to the base (Picture 4), and the axis planes are aligned.
-
Put the pillow on and snap the button (Picture 5).
-
Install the mosquito net and build the 3 buttons, (Picture 7)
-
Separate the seat and the base-pull the pin out by 2 mm by hand, pry it open with a flat-blade screwdriver, and then pull it out by hand to separate (Picture 8).
-
Swing to lock, move /JP to open the lock to swing, move down to lock and not to swing (Picture 9).
-
The cylindrical plug of the power cord is inserted into the circular power jack of the host, and the other end is inserted into a 5V power output device such as a mobile phone charger or a power bank, an adapter, etc. (Picture 10). USB port, used to play music on U disk. 4
Control panel instructions
Remote control panel
Please pull out the insulating film of the battery box before using the remote control.
Bluetooth instructions
-
Long press the host music button for 3 seconds, or press the button on the remote control, The blue indicator light flashes. (As shown below)
-
Click “Settings”-“Bluetootb” on the phone, enter the Bluetootb control page, search and click the Bluetootb name of yaolan to connect. (As shown below)
-
The Bluetooth connection is successful. (As shown below)
-
Open the music APP on your mobile phone, search and play your favorite songs oo the APP, switch songs, adjust the volume and other operations.
-
If you want to connect Bluctootb to another mobile phone, please connect the Bluetooth on the original mobile phone first: click (D to pop up the page and then click “disconnect”.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>