SONOFF B02-BL LED Smart Bulb User Manual

: June 16, 2024
: SonOFF

Table of Contents

Product Introduction
Features
Operating Instruction
Compatible Pairing Mode
Specifications
Common Problems
Warranty Conditions
EU Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**SONOFF B02-BL LED Smart Bulb User Manual

**

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt

+44 (0)203 514 4411

Importer: Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Product Introduction

Features

SONOFF LED is a LED smart bulb that allows users to adjust the brightness and color, and remotely turn on/off the connected devices via your smartphone, schedule it on/off and share it to your family to control together.

Remote Control| Single/Countdown
Timing| Share Control
---|---|---
Smart Scene| Step less Dimming| Scene Mode
“eWeLink Remote” Control| Group Control| LAN Control

Operating Instruction

Install the device

To avoid, electric shock, please turn off the power before installing the device.

Download APP

Power on
After powering on, the device will enter the Bluetooth Pairing mode during the first use. The device enters the “breathing mode”

The device will exit the Bluetooth Pairing mode if not paired within 3mins. If you want to enter this mode, please press the manual switch three times repeatedly at an interval of ever 1s (Off-ON-Off-ON-Off-ON). The “breathing mode” indicates the light enters Bluetooth pairing mode.

Add the device

Tap “+” and select “Bluetooth Pairing”, then operate following the pompt on the app.

Compatible Pairing Mode

If you fail to enter Bluetooth Pairing Mode, please try “Compatible Pairing Mode” to pair.

Press the light switch 5 times repeatedly at an interval of every 1s (Off-ON-OffON-Off-ON-Off-ON-Off-ON) when the light is on. The “quick flash” indicates the device enters the compatible pairing mode.
Tap “+” and select “Compatible Pairing Mode” on APP.

For Android System:
Enter Wi-Fi password and tap “Next”: Be patient until pairing completes. For iOS system:
Enter Wi-Fi password, tap “Next” and then “Connect”. Select Wi-Fi SSID with ITEAD-
** and enter the password 12345678, and then go back to eWeLink app and tap
“Next”. Be patient until pairing completes.

Usage of being an ordinary bulb
Power on the bulb, it will enter quick pairing mode (The bulb changes from bright to dim any cycle the mode), after 10s, if power off, it will go solid and keep warm light at the highest brightness.

Specifications

Model	B02-BL-A60, B05-BL-A19, B05-BL-A60
Input	A19: 120V AC 60HzA60: 230V AC 50Hz
Luminous Flux	806Lm
CCT	2700K-6500K
Rated power	9W
Lamp base	A60:E27A19:E26
CRI	≥Ra80
Life Expectancy	15000h
Wi-Fi	IEEE 802.11 b/g/n 2.4GHz
Bluetooth Standard	4.2BLE
App operating systems	Android & iOS
Dimension	60x60x112mm

B02-BL-A60 is bi-colour LED smart bulb.
B05-BL-A19/B05-BL-A60 is RGBCW LED smart bulb.

Switch Network

If you need to change the network, press the light switch 3 times repeatedly at an interval of every 1s (Off-ON-Off-ON-Off-ON) when the light is on. The “breathing mode” indicates the device enters Bluetooth pairing mode and you can pair again.

Factory Reset
Deleting the device on the eWeLink app indicates you restore it to factory setting.

Common Problems

Q: Why this device always failed to add?

A: Please solve this problem according to the following methods:

Maybe you have entered a wrong Wi-Fi password.
Maybe there’s too much distance between the switch your router or the environment causes interference, consider getting close to the router. If failed, please add it again.
The 5G Wi-Fi network is no supported and only supports the 2.4GHz wireless network
Maybe the MAC address filtering is open. Please turn it off.
Ensure steady enough network.

Q: How many control methods are available for this device?
A: 3 control methods available, including Wi-Fi & LAN control and “eWeLink Remote” Control.

Q: How to check whether this device is offline?
A: There is prompt of offline device in the device home page in eWeLink app when this device is offline.

Q: What new features can be accessed during this device is in “eWeLink Remote” remote control?
A: In this mode, it is available to adjust the brightness, color temperature and color, even you can control this device via Bluetooth or “eWeLink Remote” remote control.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cz a.s.
Registered office : Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN : 27082440

Subject of the declaration:
Title: Wi-Fi Smart LED Bulb
Model / Type: B02/B05-BL

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU