SOMOGYI ELEKTRONIC LA 51 LED Table Lamp Light Instruction Manual
- June 16, 2024
- SOMOGYI ELEKTRONIC
Table of Contents
LED table lamp
LA 51
instruction manual
LA 51 LED Table Lamp Light
Before using the product for the first time, please read the instructions for
use below and retain them for later reference. The original instructions were
written in the Hungarian language. Modern, table lamp with touch buttons. You
can choose between cold white (5000 K) and warm white (2700 K) lighting,
moreover by using the two kinds of LEDs together, natural colour temperature
is available.
Brightness is dimmable in 5 stages. The lamp memorizes the settings and will
always switch on following the last ones.
The room temperature (°C / °F), the current time (12h/24h), alarm time and
date appears on the LCD display with blue backlight, which is built-in to the
shaft of the lamp. The shaft of the lamp is adjustable within 90° angle, while
the head part is adjustable to 180°.
Power supply is provided by the included USB adapter.
PARTS OF THE LUMINAIRE
- base of the lamp
- shaft of the lamp
- head part of the lamp with LEDs
- touch buttons
- LCD display
- power adaptor socket
- power cable
- USB power adaptor
INSTALLATION, USE
Put 1 pc CR 2032, 3 V button battery to the battery holder, located in the shaft of the lamp. This battery provides the power supply of the clock. You can provide power supply for the lamp and LCD backligth with the included USB power adaptor.
FUNCTIONS OF TOUCH BUTTONS
M – 4 pcs warm white LEDs/ 10 pcs cold white LEDs / all LEDs
**** – lighting on/off switch
+ – increasing brightness
– – decreasing brightness
FUNCTIONS OF THE BUILT IN CLOCK TOUCH BUTTONS
Mode – switch between displaying of current time (TIME) and alarm time (ALARM)
Set – clock setting: hour/minute/year/month/day
– alarm setting: hour/minute/repeating alarm in minutes/alarm melody
Up – stepping the values up when setting the clock or alarm. When the time is
displayed, you can switch between 12h and 24h time display. In case of 12-h
time display, AM will indicate the time before noon and PM after noon. In case
of display of alarm time, alarm can be activated with this button. Active
alarm function is indicated by Zz symbol.
Down – stepping the values down when setting the time or alarm. You can switch
between displaying °C or °F when the clock is displayed. Alarm can be
activated with this button, when the alarm time is displayed. Active alarm
function is indicated by Zz symbol.
ALARM
Activated alarm function (Zz symbol is visible) will wake at the set alarm
time, with the pre-set melody (8 tones). Alarm will last 1 minute, then so
much pause will follow it, what you set as repeated section of alarm (1-60
minutes). If you push one of the buttons of the clock during the alarm, then
it will wake you up again only on the next day at the set alarm time.
CLEANING AND MAINTENANCE
In order to ensure optimum functioning of the luminaire, the unit may require cleaning at least once a month, depending on the manner of use and degree of contamination.
- Power off the luminaire before cleaning!
- Use a slightly moistened cloth to clean the outer surface of the luminaire. Do not use any aggressive cleaners. Avoid getting water inside the unit and on the electric components!
WARNINGS
- Make sure, the appliance has not damaged during transport!
- The lamp may only be used in dry, indoor conditions!
- The lamp may only be operated with the supplied power adaptor. The power voltage of the lamp is 5 V , do not differ from it!
- LED light source of the luminaire is not replaceable. At the end of the lamp lifespan the entire luminaire should be destroyed.
- The luminaire is not suitable for looping-in installation.
- Pay attention to the polarity by battery replacement!
- Do not use different kinds of batteries and/or used and new batteries together!
- Do not open, burn and short circuit the batteries!
- It is forbidden to charge the batteries which are not rechargeable! Risk of explosion!
Do not stare into the light of the LED!
In the event that the power cable should become damaged, it should only be
replaced with cables obtained from the manufacturer or its service facility.
Waste equipment must not be collected separately or disposed of with household
waste because it may contain components hazardous to the environment or
health. Used or waste equipment may be dropped off free of charge at the point
of sale, or at any distributor which sells equipment of identical nature and
function. Dispose of product at a facility specializing in the collection of
electronic waste. By doing so, you will protect the environment as well as the
health of others and yourself. If you have any questions, contact the local
waste management organization. We shall undertake the tasks pertinent to the
manufacturer as prescribed in the relevant regulations and shall bear any
associated costs arising.
SPECIFICATION
power supply: . . . . . . . . . . . . . . . . . . . . USB power adaptor is
included: PRI: 230 V~ / 50 Hz • SEC: 5 V **/ 1500 mA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . battery for the
clock: 1 x 3 V (CR2032), included
length of USB cable: . . . . . . . . . . . . . . . 150 cm
power: . . . . . . . . . . . . . . . . . . . . . . . . . 5 W
brightness: . . . . . . . . . . . . . . . . . . . . . . 400 lm
LEDs: . . . . . . . . . . . . . . . . . . . . . . . . . . 4 pcs warm white and
10 pcs cold white SMD LEDs
colour temperature: . . . . . . . . . . . . . . . . 2700 K / 5000 K
power factor:. . . . . . . . . . . . . . . . . . . . . >0,5
operating temperature: . . . . . . . . . . . . . +10 – +40 °C
weight: . . . . . . . . . . . . . . . . . . . . . . . . . 790 g
dimensions:. . . . . . . . . . . . . . . . . . . . . . 150 mm x 330 mm x 260
mm
Standby power consumption (P ): . . . . 0,24 WSB
CRI: . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
The useful luminous flux applies to the following shapes of luminous flux: . .
. . . wide cone (120°)
producer: Somogyi Elektronic Kft.
H – 9027 • Győr, Gesztenyefa út 3. • www.somogyi.hu
Distribútor: Somogyi Elektronic Slovensko s. r. o.
Ul. gen. Klapku 77, 945 01 Komárno, SK,
Tel.: +421/0/35 7902400 • www.somogyi.sk
Distribuitor: S.C. SOMOGYI ELEKTRONIC S.R.L.
J12/2014/13.06.2006 C.U.I.: RO 18761195
Cluj-Napoca, judeţul Cluj, România, Str. Prof. Dr. Gheorghe Marinescu, nr. 2,
Cod poştal: 400337
Tel.: +40 264 406 488, Fax: +40 264 406 489 •
www.somogyi.ro
Producător: Somogyi Elektronic Kft
Uvoznik za SRB: ELEMENTA d.o.o.
Jovana Mikića 56, 24000 Subotica, Srbija • Tel:+381(0)24 686 270 •
www.elementa.rs
Zemlja uvoza: Mađarska • Zemlja porekla: Kina • Proizvođač: Somogyi Elektronic
Kft.
Uvoznik za HR: ZED d.o.o.
Industrijska c. 5, 10360 Sesvete, Hrvatska • Tel: +385 1 2006 148 •
www.zed.hr
Uvoznik za BiH: DIGITALIS d.o.o.**
M.Spahe 2A/30, 72290 Novi Travnik, BiH • Tel: +387 61 095 095 •
www.digitalis.ba
Proizvođač: Somogyi Elektronic Kft, Gesztenyefa ut 3, 9027 Gyor, Mađarska
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>