PNI SR5 Cutting and Stripping Instruction Manual
- June 16, 2024
- PNI
Table of Contents
PNI SR5 Cutting and Stripping Instruction Manual
Introduction
- Lock / Unlock the pliers
- Strip the cable
- Cable stripping limit
- Crimp the RJ45 plug
- Cut the cable / wires
Instructions
- Unlocking the pliers: Bring the handles of the pliers closer and remove the obstacle to unlock it.
- Cable cutting: Cut the cable to the desired length. Make sure that the cut is straight and not diagonal.
- Cable stripping: Insert the cable into the stripping area until it reaches the stopper. Tighten the pliers and gently rotate the cable until the blades cut the outer sheath of the cable.
- Wires preparation: Straighten the twisted wires, sort them by color and cut them to have the same length.
- Plug preparation: Insert the correctly aligned wires into the RJ45 plug until they touch the end of the plug.
- Plug crimping: Insert the RJ45 plug into the crimping area of the pliers. Squeeze the pliers’ handles twice in a row to crimp the plug.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>