dji EB3WBC Air 3 Fly More Combo User Manual

: June 16, 2024
: DJi

dji EB3WBC Air 3 Fly More Combo

Product Information

Aircraft

Horizontal Omnidirectional Vision System
Gimbal and Camera
- A Tele Camera
- B Wide Camera
Downward Vision System
Auxiliary Bottom Light
Infrared Sensing System
Battery Buckles
Landing Gears (Built-in antennas)
Front LEDs
Aircraft Status Indicators
Motors
Propellers
Intelligent Flight Battery
Power Button
Battery Level LEDs
USB-C Port
microSD Card Slot
Dongle Compartment Cover

Remote Controller RC151

Power Button
Flight Mode Switch
Flight Pause/Return to Home (RTH) Button
Control Sticks
Customizable Button
Mobile Device Holder
Antennas
Remote Controller Cable
Photo/Video Toggle
Control Sticks Storage Slot
USB-C Port
Battery Level LEDs
Gimbal Dial
Shutter/Record Button
Mobile Device Slot

Product Usage Instructions

Charge to Activate

Before using the product, make sure to charge the Intelligent Flight Battery.

Check Battery Level, Power On/Off

To check the battery level, press the Power Button once. To power on/off the aircraft or remote controller, press the Power Button and hold it.

Prepare the Aircraft

Ensure that all the components of the aircraft are properly connected and in place. This includes attaching the propellers, checking the battery level, and securing the battery buckles.

Prepare the Remote Controller

Power on the remote controller and ensure that it is connected to a mobile device. Insert the mobile device into the mobile device holder.

Ready to Fly

Once the aircraft and remote controller are powered on and the DJI Fly App is launched on the mobile device, you are ready to fly.

Fly

To perform an auto take-off, use the remote controller. Follow the instructions provided in the DJI Fly App for controlling the aircraft during flight.

Specifications

Operating Frequency: 2.400-2.4835 GHz; 5.15-5.25GHz;5.725-5.850 GHz
Transmitter Power: 2.4 GHz

Frequently Asked Questions

Q: How do I download the DJI Fly App?

A: You can download the DJI Fly App from the App Store (for iOS devices) or Google Play Store (for Android devices).

Q: How do I activate the Intelligent Flight Battery?

A: Charge the Intelligent Flight Battery using the provided charger until it reaches full capacity. This will activate the battery.

Q: Can I fly the aircraft without the DJI Fly App?

A: No, the DJI Fly App is required to control and monitor the aircraft during flight.

Aircraft Overview

Horizontal Omnidirectional Vision System
Gimbal and Camera
A Tele Camera
B Wide Camera
Downward Vision System
Auxiliary Bottom Light
Infrared Sensing System
Battery Buckles
Landing Gears (Built in antennas)
Front LEDs
A ircraft Status Indicators
Motors
Propellers
Intelligent Flight Battery
Power Button
Battery Level LEDs
USB C Port
microSD Card Slot
Dongle Compartment Cover

Remote Controller RC151

Power Button
Flight Mode Switch
Flight Pause/Return to Home (RTH) Button
Control Sticks
Customizable Button
Mobile Device Holder
Antennas
Remote Controller Cable
Photo/Video Toggle
Control Sticks Storage Slot
USB C Port
Battery Level LEDs
Gimbal Dial
Shutter/Record Button
Mobile Device Slot

Download the DJI Fly App and Watch the Tutorial Videos

Charge to Activate

Check Battery Level, Power On/Off

Press once to check the battery level.
Press, then press and hold to turn on/off.

Prepare the Aircraft

Prepare the Remote Controller

Ready to Fly

Power on the remote controller and the aircraft, then launch the DJI Fly App.

Fly

Auto take off/landing

Remote controller operation

Specifications

Aircraft (Model: EB3WBC)

Operating Temperature| -10 to 40°C (14° to 104°F)
Operating Frequency| 2.400-2.4835 GHz; 5.15-5.25GHz;5.725-5.850 GHz
Transmitter Power (EIRP)| 2.4 GHz: <33 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5.1GHz<23 dBm (CE/FCC);

5.8 GHz: <33 dBm (FCC); <14 dBm (CE), <30 dBm (SRRC)

Wi-Fi
Protocol| 802.11a/b/g/n/ac
Operating Frequency| 2.400-2.4835 GHz;5.15-5.25GHz;5.725-5.850 GHz
Transmitter Power

(EIRP)

| 2.4 GHz: <23 dBm (FCC), <20 dBm (CE/SRRC/MIC)

5.8 GHz: <23 dBm (FCC/SRRC), <14 dBm (CE)

Remote Controller (Model: RC151)
Operating Temperature| -10 to 40°C (14° to 104°F)
Operating Frequency| 2.400-2.4835 GHz; 5.725-5.850 GHz
Transmitter Power

(EIRP)

| 2.4 GHz: <30 dBm (FCC), <20 dBm (CE/SRRC/MIC)

5.8 GHz: <30 dBm (FCC), <23 dBm (SRRC), <14 dBm (CE)

Intelligent Flight Battery (Model: BWX233-4241-14.76)
Charging Temperature| 5 to 40°C (41° to 104° F)
Capacity| 4241 mAh
Max Charging Power| 129 W
Standard Voltage| 14.76 V

FCC Compliance Notice

Supplier’s Declaration of Conformity

Product name: DJI Air 3
Model Number: EB3WBC
Responsible Party: DJI Research LLC
Responsible Party Address: 435 Portage Ave, Palo Alto, CA 94306
Website: www.dji.com

We, DJI Research LLC being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information

The aircraft complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This remote controller complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).
These requirements set a SAR limit of 4 W/kg averaged over ten gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the limbs.

ISED Compliance Notice
CAN ICES-003 (B) / NMB-003(B)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device.
This aircraft complies complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This remote controller complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the CNR-102.
These requirements set a SAR limit of 4W/kg averaged over ten grams of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the limbs.

EU & UK Compliance Notice

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (DJI Air 3) is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com /euro-compliance EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (DJI Air 3) is in compliance with the essential requirements and other relevant provisions of Radio Equipment Regulations 2017.
A copy of the GB Declaration of Conformity is available online at www.dji.com /euro-compliance.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.