ZALMAN CNPS 10X Performa User Manual
- June 4, 2024
- ZALMAN
Table of Contents
ZALMAN CNPS 10X Performa
| Developed and designed by ZALMAN in Korea.
This product is protected by ZALMAN’s pending or registered patents.
---|---
www.zalman.comPrecautions
- Avoid tempering with objects or hands into the fan while it is in operation to prevent product damage and injuries.
- Do not eat the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If irritation persists, seek medical attention.
- To prevent possible injuries, gloves must be worn while handling this product.
- Excessive force exerted on the fan may cause damage to the fan and/or system.
- Use and keep product away from reach of children.
- Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
- Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
- Zalman Tech Co., Ltd. Is not responsible for any damages due to overclocking CPU such as, CPU and system components.
- During transportation of the system, the cooler must be removed. Zalman Tech Co., Ltd. is not responsible for any damages that occur during the transport of a system.
- Product design and specifications may be changed to improve quality and performance without notice.
Characteristics
| Model | CNPS10X Performa Black |
|---|---|
| Materials | Pure Copper, Pure Aluminum |
| Dimensions | 135(L) x 95(W) x 155(H)mm |
| Weight | 860g |
| Heat Dissipation Area | 9,271㎠ |
| Fan(s) | Dimensions |
| Bearing Type | EBR Bearing |
| Fan Speed | 700~1,500RPM ±10% |
| Max Noise Level | 27dB(A) ±10% |
| Max Airflow | 75.16CFM |
| Max Air Pressure | 1.35mmH2O |
| Rated Voltage | 12V DC |
| Thermal Compound (ZM-STC8) | Volume / Net Weight |
| Temperature Range | -40℃ ~ +150℃ (-40℉ ~ +302℉) |
Components
Cooler
| 
Fan| 
Guide
Clips|
Fan Clips
---|---|---|---
Manual
| 
Back plate
| 
Block of loading (Intel)|
Block of loading (AMD)
Nuts
| 
Hoods lateral|
Bolts of fixing
|
Stand-offs(A)
1200 / 115X / AM4
Stand-offs(B)
2066 / 2011-V3 / 2011
| 
Stand-off Nuts| 
Washers|
Composed
thermal
INTEL, AMD Backplate
1) Nuts Position
| Attention
Check that the direction of the ZALMAN logo is on the right side
No backplate required for Intel LGA2066 / 2011-V-/2011
---|---
2) LGA1200/115X
3) AM4
| Attention
Pay attention to the orientation of the nuts and side caps
---|---
INTEL, AMD Loading Block
- Intel
- AMD
| Attention
Remove the plastic cover from the bracket and attach the bracket to the back
plate
---|---
Intel Users
1) LGA2066 / 2011-V3 / 2011
| Attention
No backplate required for LGA2066 / 2011-V3 / 2011
---|---
| Attention
Tighten the 2 bolts alternately until the end
---|---
| Attention
[Installation Guide for Intel 10th Generation Motherboard Users] The
CNPS10X PERFORMA BLACK fans may have interference with the heatsink passive
thermal FET 30mm high.
---|---
2) LGA1200/115X
| Attention
[Installation Guide for Intel 10th Generation Motherboard Users] The CNPS10X
PERFORMA BLACK fans may have interference with the heatsink passive thermal
FET 30mm high.
---|---
AMD Users
1) AM4
| Attention
Please pay attention to the installation direction of the AMD guide
---|---
| Attention
Tighten the 2 bolts alternately until the end
---|---
| Attention
[Installation Guide for Intel 10th Generation Motherboard Users] The CNPS10X
PERFORMA BLACK fans may have interference with the heatsink passive thermal
FET 30mm high.
---|---
Cable Connection
1) Connexion aux cartes mères autres
Fan Specifications
| Dimensions | 135 x 135 x 25(H)mm |
|---|---|
| Bearing Type | EBR Bearing |
| Speed | 700~1,500RPM ±10% |
| Max. Noise Level | 27dB(A) ±10% |
| Max. Air Flow | 75.16CFM |
| Max. Air Pressure | 1.35mmH2O |
| Control Method | PWM Control |
| Life Span | 50,000 hours |
| Disposal of Old Electrical & Electronic Equipment, |
(Applicable in the European Union and other European
countries with separate collection systems)
---|---
| This mark, designed by Zalman, indicates product
compliance with the European Union’s RoHS
(Restriction of Hazardous Substances) Directive.
[www.zalman.com](http://www.zalman.com)
Documents / Resources
|
ZALMAN CNPS 10X
Performa
[pdf] User Manual
CNPS 10X Performa, CNPS, 10X Performa, CNPS Performa, Performa, 062121
---|---