CREALITY ENDER-3 V3 3D Printer User Manual
- June 13, 2024
- Creality
Table of Contents
3D Printer User Manual
ENDER-3 V3 3D Printer
v1.0
TO Our Dear Users
Thank you for choosing Creality. For your convenience, please read through
this User Manual before you start and follow the Instructions provided
carefully.
Creality is always ready to provide you with high—quality services. If you
encounter any issues or have any questions when using our products, please use
the contact information at the end of this manual to contact us. To further
improve your user experience, you can find more about our devices via the
following methods:
User manual: You can find instructions and videos in the USB flash disk
provided with the printer.
You can also visit our official website (https://www.creality.com) to find
information regarding software, hardware, contact information, device
instructions, device warranty information, and more.
Firmware Upgrade
- You can upgrade the firmware directly through the device screen;
- You can upgrade the firmware via the Creality Cloud OTA;
- Please visit the official website https://www.creality.com, click on Service Center — Firmware/Software Download — Download the required firmware, install and use it.
videos showing the operation of the products and afte sales service
- Please visit https://www.crealitycloud.com/product, click “Products” and select the right model, and then click “Related” to view the tutorials on after—sales service;
- Or contact our after—sales service center at +86 755 3396 5666, or send e-mail to cs@creality.com.
notes
- Do not use the printer in any way other than described herein in order to avoid personal injury or property damage;
- Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, cool and dustless environment;
- Do not expose the printer to a violent vibration or any other unstable environment, as this may cause poor print quality;
- Please use recommended filaments to avoid clogging of the extrusion head and causing damage to the machine;
- Do not use the power cable of other products during installation. Always use a grounded three—prong power outlet, which accompanies the printer;
- Do not touch the nozzle and the heated bed during operation to avoid burns or personal injury;
- Do not wear gloves or wraps while operating the machine to prevent entrapment of movable parts that could cause crushing and cutting injuries to bodily parts;
- Use the provided tools to clean the filament from the extruder in time taking advantage of the residual temperature after printing. Do not touch the extruder directly when cleaning, otherwise it may cause burns;
- Clean the printer frequently. Clean the printer body with a dry cloth regularly after powering off the printer, wipe away dust, bonded print filament and foreign objects on the guide rails;
- Children under 10 years old should not use the printer without supervision, otherwise it may cause personal injury;
- Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes; Creality will not be responsible for any violators’ legal liability under any circumstance;
- Tip: Do not plug in or unplug wires on a charged basis.
About the Printer
Parts List
Assembly Procedure
3.1 Material Rack Assembly Installation
- Install the material rack and material barrel according to the diagram;
- Align the installed material rack component holes with the locking positions to the immediate right of the gantry frame and secure them smoothly.
3.2 Gantry Frame Assembly Installation
- Select the correct voltage mode based on the local power grid voltage;
- Place the gantry frame assembly into the slots on the base: A, First, use four M4x8 screws 1o align and secure the left and right screw holes on the base;
B. Then, use four Mdx8 screws to align and secure the screw holes on the boftom of the base.
3.3 Touch screen Installation
- Connect the touchscreen 1o the base screen using the flexible flat cable;
- Snap the buckle on the back of the touch screen into the slots on the base.
Follow th llustrated diraction for ths proper insertion orfentation. Incormest Trsertion may result In demage o the screen interfaces.
Plsase press downT0 the end, when you hear & click it means that the press is in place.
Tips:
- Do not power up the machine while the touch screen is connected or disconnected from the connection cable;
- Gently pull the flexible flat cable of base screen, being catrtious to avaid breaking ir.
3.4 Equipment Wiring
- Start by inserting the nozzle cable into the cable clamp, then connect the nozzle kit, and finaly use cable ties secure the nozzle cable
- Connect the X&Z-axis motor (left).
- Connect the X&Z-axis motor (right).
About the Power-on Guide and User Interface
4.1 Power—on guide
The current Interface Is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/firmware 111 published on the official webslte.
Tips :
If any abnormalities occur during The self-check process, please refer to the
FAQ to check for possible machine malfunctions; Alternatively, scan the Cr
code for “fault reporting” to report the machine issue and seek assistance
from the after-sales service for problem resolution.
The current interface Is for reference only. Due to the continuous upgrading
of functions, it shall be subject to the latest software/firmware UI published
on the official websIte.
4.2 About the User Interface
- You can configure functions such as axki movement/temperature control, extrude/retract, and fan cooling through the preparation Interface.
The current Interface Is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/-firmware UI published on the official website.
The current interface is for reference only. Due to the continuous upgrading of functions. It shall be subject to :he latest software/-firmware UI published on the official website.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>