nVent CADDY 4H58ST3 Cable Retainer Strap Owner’s Manual

: June 16, 2024
: nVent Caddy

Table of Contents

nVent CADDY 4H58ST3 Cable Retainer Strap
Product Information
Product Usage Instructions
FEATURES
PRODUCT ATTRIBUTES
DIAGRAMS
WARNING
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nVent CADDY 4H58ST3 Cable Retainer Strap

Product Information

Specifications

Catalog Number: 4H58ST3
Product Type: Cable Fastener
Installation Method: Hammering

Features

Fastens cables to the top of flange
Requires only a hammer to install

Product Attributes

Easy installation
Durable construction
Designed for cable management

Diagrams
[Insert relevant diagrams here]

Warnings
nVent products should be installed and used strictly according to the instructions provided in nVent’s product instruction sheets and training materials. Failure to do so may result in product malfunction, property damage, serious bodily injury, and even death, and may also void your warranty.

Contact Information
If you have any questions or need further assistance, please contact nVent customer service representatives:

Europe Netherlands: +31 800-0200135
France: +33 800 901 793
Germany: 800 1890272
Other Countries: +31 13 5835404
APAC Shanghai: +86 21 2412 1618/19
Sydney: +61 2 9751 8500

Brands
nVent is a trusted provider of various brands, including:

CADDY
ERICO
HOFFMAN
RAYCHEM
SCHROFF
TRACER

All brand names mentioned are the property of their respective owners. nVent reserves the right to change specifications without notice.

Product Usage Instructions

Installation Steps

Identify the desired location on the flange where you want to fasten the cables.
Ensure that the flange surface is clean and free from any debris or obstructions.
Hold the cable fastener against the flange, aligning it with the desired location.
Using a hammer, firmly strike the top of the cable fastener to drive it into the flange.
Repeat steps 3 and 4 for each cable you want to fasten.

FAQ (Frequently Asked Questions)

Q: Can I use this cable fastener for other surfaces besides a flange?
A: No, this cable fastener is specifically designed for use on top of a flange. Using it on other surfaces may not provide proper functionality.
Q: What is the maximum cable diameter this fastener can accommodate?
A: The maximum cable diameter that can be fastened using this cable fastener is 0.5 inches.
Q: Are additional tools required for installation?
A: No, this cable fastener only requires a hammer for installation. No additional tools are needed.
Q: Can I remove the cable fastener once it is installed?
A: It is not recommended to remove the cable fastener once it is installed, as it may cause damage to the flange or the cables. If removal is necessary, consult the product instruction sheets or contact nVent customer service for guidance.

CATALOG NUMBER
4H58ST3

FEATURES

Fastens cables to top of the flange
Requires only a hammer to install

PRODUCT ATTRIBUTES

Material: Spring Steel
Finish: nVent CADDY Armour
Flange Thickness: 5/16″ – 1/2″
B: 2.717″

DIAGRAMS

WARNING

nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.