nVent CADDY IDSM16 Independent Support Clip Owner’s Manual
- June 16, 2024
- nVent Caddy
Table of Contents
nVent CADDY IDSM16 Independent Support Clip
Product Usage Instructions
Installation
- Ensure that the T-grid size is compatible with the Independent Support Clip.
- Identify the desired location for installation.
- Place the Independent Support Clip onto the T-grid, aligning the flange with the grid.
- Insert the screw through the hole in the flange and into the T-grid.
- Tighten the screw securely using an appropriate tool.
Fixture Support
The Independent Support Clip is designed to provide support for fixtures. To use the clip for fixture support, follow these steps:
- Attach the fixture to the Independent Support Clip using the appropriate mounting hardware.
- Ensure that the fixture is securely attached and properly aligned.
FAQ
- Q: What is the maximum static load that the Independent Support Clip can handle?
- A: The Independent Support Clip can handle a maximum static load of 290 N.
- Q: Where can I find nVent’s product instruction sheets?
- A: nVent’s product instruction sheets are available at www.nvent.com and can also be obtained from your nVent customer service representative.
- Q: Can the Independent Support Clip be used for fixtures of any size?
- A: The Independent Support Clip is designed to accommodate fixtures within a T-grid size of 24 mm.
- Q: Are there any special tools required for installation?
- A: No, the Independent Support Clip does not require any tools for installation.
INDEPENDENT SUPPORT CLIP
FEATURES
- Provides a means of independent support of fixtures
- No tools are required for installation
- Includes mounting hardware
SPECIFICATIONS
Catalog Number
|
Item Name
|
Material
|
Finish
|
T-Grid Size
| Flange Thickness(FT)| Screw Diameter(Sc )|
Screw Length(L)
|
Static Load(F)
---|---|---|---|---|---|---|---|---
IDSM16
|
173460
|
Spring Steel
| nVent CADDY
Armour
|
24 mm
|
1.5 mm
|
M6
|
16 mm
|
290 N
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
CONTACT
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands:
- +31 800-0200135
- France:
- +33 800 901 793
Europe
- Germany:
- 800 1890272
- Other Countries:
- +31 13 5835404
APAC
- Shanghai:
- + 86 21 2412 1618/19
- Sydney:
- +61 2 9751 8500
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER.
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent