nVent CADDY TDHT6 TDHT Trapezoidal Deck Hanger with Nut Owner’s Manual
- June 16, 2024
- nVent Caddy
Table of Contents
nVent CADDY TDHT6 TDHT Trapezoidal Deck Hanger with Nut
Product Information
Specifications
- Catalog Number: TDHT6
- Material: Spring Steel
- Finish: nVent CADDY Armour
- Rod Size: 3/8″
- Hole Size 1: 0.268″
- Hole Size 2: 0.551″
- Hole Size 3: 0.413″
- Diameter (D): 2″ Max
- Ceiling Thickness:
- .0248″ – .0276″
- .0277″ – .0315″
- .0316″ – .0394″
- .0395″ – .0472″
- Static Load F:
- 130 lb
- 150 lb
- 180 lb
- 225 lb
Features
The TDHT Trapezoidal Deck Hanger with Nut, 3/8 Rod has the following features:
- Easy installation
- Use TDHP perforation tool to punch a hole in decking
Product Usage Instructions
Installation
- Position the TDHT Trapezoidal Deck Hanger on the desired location of the decking.
- Use the TDHP perforation tool to punch a hole in the decking, matching one of the provided hole sizes.
- Insert the 3/8″ rod through the punched hole in the decking.
- Secure the TDHT Trapezoidal Deck Hanger in place using the included nut.
Warnings
It is important to follow these warnings to ensure safe and proper usage of
the product:
- nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
- Improper installation, misuse, misapplication, or failure to follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death.
- For detailed instructions and warnings, refer to the instruction sheets available at www.nvent.com or contact your nVent customer service representative.
FAQ
-
Q: What is the maximum static load for the TDHT Trapezoidal Deck Hanger?
A: The maximum static load varies depending on the model:- TDHT6: 130 lb
- TDHT7: 150 lb
- TDHT8: 180 lb
- TDHT9: 225 lb
-
Q: Can I install the TDHT Trapezoidal Deck Hanger on different ceiling thicknesses?
A: Yes, the TDHT Trapezoidal Deck Hanger can be installed on various ceiling thicknesses ranging from .0248″ to .0472″. Please refer to the specifications section for the specific ceiling thickness ranges. -
Q: How do I punch a hole in the decking?
A: To punch a hole in the decking, use the TDHP perforation tool provided with the product. Align the tool with the desired location, apply pressure, and rotate until a hole is created. -
Q: Can I use the TDHT Trapezoidal Deck Hanger without the included nut?
A: No, the nut is essential to securely hold the TDHT Trapezoidal Deck Hanger in place. Always make sure to use the included nut during installation.
FEATURES
- Easy install
- Use TDHP perforation tool to punch hole in decking
PRODUCT ATTRIBUTES
- Material: Spring Steel
- Finish: nVent CADDY Armour
- Rod Size: 3/8″
- Hole Size 1: 0.268″
- Hole Size 2: 0.551″
- Hole Size 3: 0.413″
- D: 2″ Max
| Ceiling Thickness | Static Load F |
|---|---|
| .0248″ – .0276″ | 130 lb |
| .0277″ – .0315″ | 150 lb |
| .0316″ – .0394″ | 180 lb |
| .0395″ – .0472″ | 225 lb |
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
Europe
- Netherlands: +31 800-0200135
- France: +33 800 901 793
Europe
- Germany: 800 1890272
- Other Countries: +31 13 5835404
APAC
- Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.