nVent CADDY HMZG471 Hangermate Vertical Mount Screw Owner’s Manual

: June 16, 2024
: nVent Caddy

Table of Contents

nVent CADDY HMZG471 Hangermate Vertical Mount Screw
Product Information
Product Usage Instructions
FEATURES
SPECIFICATIONS
DIAGRAMS
WARNING
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nVent CADDY HMZG471 Hangermate Vertical Mount Screw

nVent-CADDY-HMZG471-Hangermate-Vertical-Mount-Screw-
product

Product Information

Specifications

Catalog Number: HMZG471
Material: Steel
Finish: Electrogalvanized
Rod Size(RS): 3/8
Flange Thickness(FT): Not specified
Screw Diameter(Sc): 1/4
Screw Length(L): 1

Features

Convenient design allows fast and easy installation
Eliminates the need for labor-intensive operations, such as pre-punching or drilling of steel components
Only one driver needed for all anchor sizes
Tapped head permits in-line mounting of threaded rod systems

Product Usage Instructions

Installation

Ensure you have the necessary tools and equipment for installation.
Carefully read and understand the product instruction sheet provided by nVent. You can find the instruction sheet at www.nvent.com or contact your nVent customer service representative for a copy.
Identify the appropriate location for installation.
If required, prepare the surface by cleaning and removing any debris or obstructions.
Position the anchor in the desired location and align it according to the instructions.
Using the provided driver, secure the anchor in place by driving the screw into the designated hole.
Ensure the anchor is securely fastened and double-check the alignment.

Proper Usage and Safety

Only use the product as indicated in the nVent instruction sheets and training materials.
Failure to follow nVent’s instructions and warnings may result in product malfunction, property damage, serious bodily injury, and even death.
For any doubts or questions regarding usage or safety, refer to the instruction sheet or contact nVent customer service.

FAQ

Q: Where can I find the product instruction sheet?
A: The product instruction sheet is available at www.nvent.com. You can also request a copy from your nVent customer service representative.
Q: What should I do if I encounter any issues during installation?
A: If you encounter any issues during installation, refer to the instruction sheet for troubleshooting steps. If the issue persists, contact nVent customer service for assistance.
Q: Can I use this product for other materials besides steel?
A: The product is specifically designed for use with steel components. Using it with other materials may result in improper installation and reduced performance. Contact nVent customer service for guidance on alternative materials if needed.

HANGERMATE® VERTICAL MOUNT SCREW FOR STEEL WITH LOCK NUT

FEATURES

Convenient design allows fast and easy installation
Eliminates the need for labor-intensive operations, such as pre-punching or drilling of steel components
Only one driver needed for all anchor sizes
Tapped head permits in-line mounting of threaded rod systems

SPECIFICATIONS

Catalog Number

|

Material

|

Finish

|

Rod Size(RS)

| Flange Thickness(FT)| Screw Diameter(Sc)|

Screw Length(L)

---|---|---|---|---|---|---
HMZG471| Steel| Electrogalvanized| 3/8″| 0.0600″ – 0.2500″| 1/4″| 1″

DIAGRAMS

nVent-CADDY-HMZG471-Hangermate-Vertical-Mount-Screw-
fig-1

WARNING

nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.