nVent CADDY TRC212 Swift Clip Threaded Rod Attachment Owner’s Manual
- June 16, 2024
- nVent Caddy
Table of Contents
nVent CADDY TRC212 Swift Clip Threaded Rod Attachment
Product Information
Specifications
- Catalog Number: TRC212
- Product Name: nVent CADDY SWIFT CLIP THREADED ROD ATTACHMENT
- Outer Diameter: 2 1/8 inches
- Copper Tube Size: 2 inches
- Rod Size: 3/8 inches
Features
The nVent CADDY SWIFT CLIP THREADED ROD ATTACHMENT offers the following
features:
- Easy and secure attachment of threaded rods
- Durable construction for long-lasting performance
- Designed to support copper tubes with a size of 2 inches
- Compatible with rods with a diameter of 3/8 inches
Product Usage
Installation
- Ensure that you have read and understood the product instruction sheets available at www.nvent.com.
- Select a suitable location for the attachment based on your specific application requirements.
- Prepare the surface by cleaning it and removing any debris or obstructions.
- Position the nVent CADDY SWIFT CLIP THREADED ROD ATTACHMENT on the surface and align it accordingly.
- Securely fasten the attachment using appropriate screws or bolts. Refer to the product instruction sheets for recommended hardware.
- Verify that the attachment is firmly installed and can support the intended load.
Usage Tips
Here are some tips to ensure optimal usage of the nVent CADDY SWIFT CLIP
THREADED ROD ATTACHMENT:
- Regularly inspect the attachment for any signs of damage or wear. Replace if necessary.
- Ensure that the threaded rod is securely attached to the nVent CADDY SWIFT CLIP for stability.
- Do not exceed the recommended load capacity of the attachment.
- Follow all safety precautions and guidelines provided by nVent during installation and usage.
Warning
It is important to note that improper installation, misuse, misapplication, or
failure to follow nVent’s instructions and warnings may result in:
- Product malfunction
- Property damage
- Serious bodily injury or death
- Voiding of warranty
Please ensure that you thoroughly read and understand the product instruction sheets and training materials provided by nVent before installing and using this product.
Contact Information
If you have any questions or need further assistance, please contact nVent
customer service representatives in your respective region:
- Europe Netherlands: +31 800-0200135
- France: +33 800 901 793
- Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Disclaimer
Product specifications are subject to change without notice. Please refer to
the latest product documentation for the most up-to-date information.
FAQ
-
Can I use this attachment for threaded rods with a larger diameter?
No, this attachment is specifically designed for rods with a diameter of 3/8 inches. Using it with larger rods may compromise its performance and stability. -
What is the maximum load capacity of this attachment?
The maximum load capacity of the nVent CADDY SWIFT CLIP THREADED ROD ATTACHMENT depends on various factors such as installation method and surface strength. It is recommended to refer to the product instruction sheets or consult nVent customer service for specific load capacity information. -
Can I install this attachment on different types of surfaces?
The nVent CADDY SWIFT CLIP THREADED ROD ATTACHMENT is designed for versatile installation and can be used on various surfaces. However, it is important to ensure that the surface is suitable and capable of supporting the intended load. Consult the product instruction sheets for more information on surface compatibility.
FEATURES
- Snap-on and twist installation requires no tools
- Easily adjusts by rotating up or down on the threaded rod
- For support and positioning of refrigeration, A/C tubing, PEX piping, conduit and cabling
- Secures pipe and insulation without any breaks
- Compliant with UL® 2043 and suitable for use in air handling (plenum) spaces
PRODUCT ATTRIBUTES
- Material: Polyamide
- Working Temperature: -40 to 284 °F
- Outer Diameter: 2 1/8″
- Copper Tube Size: 2″
- Rod Size: 3/8″
ADDITIONAL PRODUCT DETAILS
Clip must be installed with temperature at or above 14 °F (-10 °C).
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
-
Netherlands:
+31 800-0200135 -
France:
+33 800 901 793
Europe
-
Germany:
800 1890272 -
Other Countries:
+31 13 5835404
APAC
-
Shanghai:
+ 86 21 2412 1618/19 -
Sydney:
+61 2 9751 8500
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice