nVent LENTON RBVB12070M Vertical Pouring Basin Extended Owner’s Manual

Table of Contents

nVent-LENTON-RBVB12070M-Vertical-Pouring-Basin-Extended-
PRODUCT

Specifications

Product Features

Step 1: Preparation

Before using the extended vertical pouring basin, ensure that you have the necessary equipment and materials ready:

Step 2: Placement

Place the extended vertical pouring basin in the desired location adjacent to the tap hole in the sleeve. Ensure that there are no interferences with the structure that may obstruct the pouring process.

Step 3: Pouring

Once the extended vertical pouring basin is properly placed, carefully pour the molten material into the basin using the tap hole in the sleeve. Take caution to avoid spills or splashes.

Step 4: Removal

After the pouring process is complete, allow the molten material to solidify and cool. Once cooled, carefully remove the extended vertical pouring basin from the sleeve.

Step 5: Cleaning and Storage

Clean the extended vertical pouring basin thoroughly after each use to remove any residue or buildup. Store it in a safe and dry location to ensure its longevity and reusability.

Frequently Asked Questions (FAQ)

Q: Can the extended vertical pouring basin be used with any other sleeve types?

A: No, the extended vertical pouring basin is specifically designed for use with T-Series and B-Series vertical sleeves. It may not be compatible with other sleeve types.

Q: Is the extended vertical pouring basin suitable for high-temperature applications?

A: Yes, the extended vertical pouring basin is made from heat-resistant graphite, making it suitable for use in high-temperature environments.

Q: Can the extended vertical pouring basin be reused?

A: Yes, the extended vertical pouring basin is designed to be durable, reusable, and long-lasting, allowing for multiple uses.
Extended vertical pouring basins are used when interferences of the structure are directly next to the tap hole in the sleeve.

Durable, reusable, and long-lasting

RBVA pouring basins require one RBM2660DC pouring basin frame and one RBS5000 bolt retainer.
RBVB pouring basins require one RBM2660TC pouring basin frame and one RBS5000 bolt retainer (all sold separately).
Before installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.
Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.

WARNING

nVent products should only be installed and used as specified in nVent product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, error use, or other failure to follow.
nVent’s instructions and warnings in their entirety may cause product failure, damage to property, serious personal injury and death, and/or void your warranty.

Nord-Amerika

+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates.
All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.